Sharpen your skills, enrich your knowledge and be ready for the battle of knowledge!
About Rocket (SEMINAR)
A cylindrical projectile that can be propelled to a great height or distance by the combustion of its contents, used
typically as a firework or signal.
Like many other engines, a rocket produces thrust by burning fuel. Most rocket engines turn the fuel into hot gas.
Pushing the gas out of the back of the engine makes the rocket move forward. A rocket is different from a jet
engine. A jet engine requires oxygen from the air to work. A rocket engine carries everything it needs. That is why a
rocket engine works in space, where there is no air.
Review. The mission and its requirements are designed to reflect various aspects of real world missions including
telemetry requirements, communications, and autonomous operations. Each team are scored throughout the
competition on real-world deliverables such as Schedules, design review presentations, and demonstration flights.
The teams are required to follow these criteria while working on their Can-Sat models.
Mission Objective
The mission of the workshop would be to design a satellite that will be fit inside the small jar. The sensors will capture
the environmental data and store the data via Bluetooth. We can launch the satellite with the help of parachute using
drop down mechanism. After receiving the CANSAT we can retrieve data from. Each CanSat will have a parachute
with which it will descend at a velocity between 3 m/s to 5 m/s. The circuit has to be designed for the following
objectives: -
i. Temperature of Environment
iii. Pressure
All circuitry has to be fit into the CAN and all values will be displaying via Bluetooth on mobile phone. The data will
be having variation per second.
Locations /data 00 01 02 03 04 05 06 07
0000 22 00 57 01 28 00 FF FF0000 22 00 57 01 28 00 FF FF
Software Installation
Circuit designing compatible with Arduino Software. Team can do programming in Arduino Software. The SDNx
Programmer works based on a USBASP setup (inbuilt on development board), hence plugging in a programmer and
installing USB-ASP would be required to program the development boards (Inbuilt on development board).
REGISTRATION FEES:
There will be 5 members in every team.
With Regards
SANJAY RATHEE
(Founder SDNx)