System Mode
Current software 0.8.0 1.1 This v1003.0 the Build 130117, China Rel.38227s
Network parameters version:
IPTV 设置 Current hardware MD898N V1 00000001
wireless setting version:
IP bandwidth control Running time: 0 Day (S) 00:06:08
DHCP server
Routing
DSL status
Forwarding rules
Parental Controls Line status: the DSL connected
Firewall DSL mode: ADSL_ANSI_T1.413
IP and MAC binding Annex 类型: Annex A
Dynamic DNS
System Management Uplink Downlink
Current rate (Kbps) 224 2048
The maximum rate
380 3004
(Kbps)
SNR margin (db) 8 11.5
Line Attenuation
31.5 45
(db)
Error statistics (a) 0 0
MAC地址: 28:2C:B2:07:DF:2C
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
DHCP: Enable
WLAN Status
Status: turned
SSID: MERCURY_07DF2C
Nobumichi: Automatic (Nobumichi 1)
Bandwidths: Automatic
Mode: 11bgn Mixed
Encryption: WPA-PSK / WPA2-PSK
MAC地址: 28:2C:B2:07:DF:2C
Maximum transfer 300Mbps
rate:
WDS Status: Not open
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Network parameters The wizard to set basic network parameters required to access, click
IPTV 设置 "Next" to continue.
wireless setting
To set a specific function or arguments in detail, please click on the
IP bandwidth control
relevant section in the left menu.
DHCP server
Routing
Forwarding rules Next
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page offers a choice of two modes of the system, the selection
Network parameters result in the "WAN port settings" page reflects. If you select "wireless
IPTV 设置 routing mode," please be careful not to devices connected to the LAN4 /
wireless setting WAN port.
IP bandwidth control
System Mode Selection:
DHCP server
ADSL wireless routing mode
Routing
Wireless routing mode
Forwarding rules
Parental Controls Previous Next
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Manually fill in the relevant parameters VC, such as do not know, you
Network parameters can get the parameter information through automatic search function.
IPTV 设置
wireless setting Open PVC Auto Search
IP bandwidth control VPI: 0 (Range: 0-255)
DHCP server VCI: 35 (Range: 1-65535)
Routing
Previous Next
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This guide provides some of the most common means of access available.
Network parameters If it is the other way online, please click on the left side of the
IPTV 设置 "network parameters" in the "WAN port settings" set.
wireless setting
IP bandwidth control PPPoE (DSL virtual dial-up)
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Please fill in the box below ADSL Internet account and password for
Network parameters network service provider, such as forgetting consult your network
IPTV 设置 service provider.
wireless setting
IP bandwidth control username: kr2731084_scdrid
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page set the basic parameters of the wireless network.
Network parameters
IPTV 设置 Wireless Enable
wireless setting function:
IP bandwidth control SSID: MERCURY_07DF2C
DHCP server Nobumichi: automatic
Routing mode: 11bgn mixed
Forwarding rules
Encryption:
Parental Controls
WPA-PSK/WPA2-PSK
Firewall
password:
IP and MAC binding
123456789
Dynamic DNS
(A minimum of 8 characters, up to 63 ASCII
System Management characters or 64 hexadecimal characters)
No Encryption
Previous Next
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is DSL access types IPTV basic parameters. You can select
Network parameters listed below LAN port, WLAN port as IPTV port, SSID1 only be used for
IPTV 设置 Internet use.
wireless setting
IP bandwidth control Enable IPTV feature
DHCP server
If you use the LAN port as IPTV port, please ensure that the
Routing
connected set-top box IPTV selected LAN port.
Forwarding rules
1ST iTV 3 TIMES LAN4
Parental Controls
Firewall If you use WLAN port as IPTV port, make sure a wireless multiple
IP and MAC binding SSID feature is turned on and the corresponding interface is
turned on.
Dynamic DNS
SSID2 SSID3 SSID4
System Management
Previous Next
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Set up, make sure that the parameters have been set, click "Save" to
Network parameters save the configuration and effect.
IPTV 设置
wireless setting Parameter summary:
IP bandwidth control DSL PVC: 0/35
DHCP server
Connection: the PPPoE
Routing
PPPoE Username: kr2731084_scdrid
Forwarding rules
PPPoE Password: ********
Parental Controls
Firewall
Wireless Enable
IP and MAC binding Function:
Dynamic DNS 无线SSID: MERCURY_07DF2C
System Management Radio channel: Automatic
Wireless Mode: 11bgn Mixed
Encryption: WPA-PSK / WPA2-PSK
Wireless 123456789
password:
Previous saved
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page offers a choice of two modes of the system, the selection
Network parameters result in the "WAN port settings" page reflects. If you select "wireless
IPTV 设置 routing mode," please be careful not to devices connected to the LAN4 /
wireless setting WAN port.
IP bandwidth control
System Mode Selection:
DHCP server
ADSL wireless routing mode
Routing
Wireless routing mode
Forwarding rules
Parental Controls save
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to view the current WAN connection, and by clicking on the "Add" or "Edit" button to configure the WAN
Network parameters port services.
WAN port settings
LAN port settings Types IP address /
name VPI/VCI Gateway DNS status connection edit
MAC address cloning of mask
See
DSL parameter settings br_0_35_0 Bridge 0/35 N / A N / A N / A connected disconnect
Delete
PVC automatic detection
See
Group settings br_8_35_1 Bridge 8/35 N / A N / A N / A connected disconnect
Delete
IPTV 设置 218.248.245.12 Edit
wireless setting
pppoe_0_35_2 PPPoE 0/35 59.93.154.219/32 59.93.154.1 connected disconnect
218.248.245.1 Delete
IP bandwidth control
DHCP server Adding Refresh
Routing
Forwarding rules
Parental Controls Original text
Firewall
添 加刷 新
IP and MAC binding
Contribute a better translation
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is a WAN port service settings.
Network parameters
WAN port settings ATM parameters
LAN port settings
VPI (range 0-255): 0
MAC address cloning
VCI (range 32-65535): 35
DSL parameter settings
PVC automatic detection
Group settings
WAN port service settings
IPTV 设置
wireless setting WAN port connection type: the PPPoE
IP bandwidth control
username: kr2731084_scdrid
DHCP server
password: ••••••••
Routing
Password Confirmation: ••••••••
Forwarding rules
special dial: Normal dialing mode
Parental Controls
Firewall Depending on your needs, please select the corresponding connection mode:
IP and MAC binding Demand connections, the connection automatically when there is access
Dynamic DNS Automatic disconnection waiting time: 15 Minutes (0 means no
System Management automatic disconnection)
Automatic connection, automatic connection and disconnection in the
boot
Manual, connecting the user manual
Automatic disconnection waiting time: 15 Minutes (0 means no
automatic disconnection)
Save Back
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is the LAN port service settings.
Network parameters
Note: When changing the LAN IP parameters (including IP address, subnet mask) occur, to
WAN port settings ensure that DHCP server to work properly, you should ensure that the address pool set in
LAN port settings DHCP server, static address with the new LAN port IP is in the same network segment.
MAC address cloning
DSL parameter settings Group-owned: the Default
IPTV 设置
启用IGMP Snooping
wireless setting
Enables the second IP
IP bandwidth control
DHCP server DHCP server: Not enabled Enable DHCP Relay
Routing Address pool starting 192.168.1.100
Forwarding rules address:
save
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is set up the router for WAN MAC address.
Network parameters
WAN port settings WAN connection MAC address operating
LAN port settings The current MAC Cloning to
34:E6:AD:2F:17:00
MAC address cloning PC pppoe_0_35_2
DSL parameter settings pppoe_0_35_2 32:2C:B2:07:DF:2D Restore Factory MAC
PVC automatic detection
Note: Only the PC on your LAN to use this feature. MAC cloning could lead to reconnect.
Group settings
After using MAC cloning could lead to the bridge with the same VPI / VCI connection
IPTV 设置 failure, and recommended not to clone the same MAC other connections.
wireless setting
IP bandwidth control save
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
The pages DSL parameters.
Network parameters
WAN port settings DSL modulation Multimode
LAN port settings type:
MAC address cloning Annex Type: Annex A
DSL parameter settings
Open bit exchange
PVC automatic detection
Open SRA
Group settings
IPTV 设置 save
wireless setting
IP bandwidth control
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page automatic detection function setting PVC PVC detection list.
Network parameters
WAN port settings PVC detection list:
LAN port settings 8/35, 0/35, 0/100, 8/81, 0/32, 8/32, 0/80, 0/67, 0/40, 0/200, 1/33, 8/88, 0/33,
MAC address cloning 0/30, 0/31, 0/38, 0/41, 1/31, 1/32, 1/35, 1/81, 8/33, 8/38, 8/41, 14/24, 0/39,
8/40, 8/43
DSL parameter settings
PVC automatic detection
Group settings
Detection list settings:
IPTV 设置
添加PVC(VPI/VCI):
wireless setting
VPI (range 0-255):
IP bandwidth control
VCI (range 1-65535): Adding PVC
DHCP server
Routing Remove PVC (VPI / VCI):
Forwarding rules Please select PVC want to 8/35 Remove PVC
Parental Controls delete:
Firewall
Note: if not necessary, do not modify the list of detected if modify the error may cause
IP and MAC binding
the device can not connect to the network.
Dynamic DNS
If the test fails, please try again to restart the ADSL test. If after several attempts,
System Management
still not detected PVC, that you can ask your network service provider PVC information.
save
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to view all the current packet, and by clicking on the "Add" or
Network parameters "delete" button to group settings.
WAN port settings Note: When IPTV or Ethernet access open when prohibited VLAN setting is not enabled.
LAN port settings
MAC address cloning VLAN: Enable Do not enable saving
DSL parameter settings
Group name delete WAN port LAN port
PVC automatic detection
br_0_35_0 wlan0
Group settings
br_8_35_1 LAN4
IPTV 设置
Default 3 TIMES
wireless setting
2ND
IP bandwidth control
1ST
DHCP server
Routing Add to
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is DSL access types IPTV basic parameters. You can select
Network parameters listed below LAN port, WLAN port as IPTV port, SSID1 only be used for
IPTV 设置 Internet use.
wireless setting
IP bandwidth control Enable IPTV feature
DHCP server
If you use the LAN port as IPTV port, please ensure that the
Routing
connected set-top box IPTV selected LAN port.
Forwarding rules
1ST iTV 3 TIMES LAN4
Parental Controls
Firewall If you use WLAN port as IPTV port, make sure a wireless multiple
IP and MAC binding SSID feature is turned on and the corresponding interface is
turned on.
Dynamic DNS
SSID2 SSID3 SSID4
System Management
save
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is to set the basic parameters of the router wireless network.
Network parameters
IPTV 设置 SSID1: MERCURY_07DF2C Open Multi-SSID
wireless setting mode: 11bgn mixed
basic settings Nobumichi: automatic
WPS security settings Bandwidths: automatic
wireless security settings Turning on wireless function
Wireless MAC address filtering Open SSID Broadcast
Wireless Advanced Settings Open WDS
Wireless host status
IP bandwidth control save
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
WPS function: turned Off
Network parameters
IPTV 设置 Current PIN: 10,829,981 restore the original PIN code
to generate a new PIN code
wireless setting
basic settings Add a new add a new device
device:
WPS security settings
wireless security settings
Wireless MAC address filtering
Wireless Advanced Settings
Wireless host status
IP bandwidth control
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Note: In the case of open WPS You can not use WEP encryption mode, you can not use WPA
Network parameters authentication type and TKIP encryption algorithm
IPTV 设置 To protect the network security, it is strongly recommended to open the security
wireless setting settings, and use WPA2-PSK AES encryption method.
basic settings
WPS security settings SSID: MERCURY_07DF2C
wireless security settings
Turn off wireless security options
Wireless MAC address filtering
Wireless Advanced Settings WEP
Wireless host status Authentication Type: Open system
IP bandwidth control
WEP key format: Hex
DHCP server
Key Select WEP Key Key Type
Routing
Key 1: Disable
Forwarding rules
Key 2: Disable
Parental Controls
Key 3: Disable
Firewall
Key 4: Disable
IP and MAC binding
Dynamic DNS WPA-PSK/WPA2-PSK
System Management Authentication Type: automatic
Encryption Algorithm: automatic
PSK password: 123456789
(A minimum of 8 characters, up to 63 ASCII characters or 64
hexadecimal characters)
Group key update cycle: 0 (In seconds, the minimum is 30, does not update
or 0)
save
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page set MAC address filtering to control access to the computer of the wireless
Network parameters network.
IPTV 设置
wireless setting MAC address filtering: Closed enable filtering
basic settings Filtering rules
WPS security settings Ban list, the entry into force of the MAC address to access the wireless network.
wireless security settings Allow MAC address list in force to access the wireless network.
Wireless MAC address filtering
MAC address status description edit
Wireless Advanced Settings
Wireless host status
Add a new entry for the specified entry into force
specified entry failed
to delete the specified entry
IP bandwidth control
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Note: The current wireless mode contains 11n, fragmentation threshold
Network parameters value will default to the maximum value
IPTV 设置
wireless setting Transmission 100%
basic settings power:
Beacon slot: 100 (100-1000)
WPS security settings
RTS slots: 2346 (1-2346)
wireless security settings
Fragmentation 2346 (256-2346)
Wireless MAC address filtering
Threshold:
Wireless Advanced Settings
DTIM threshold: 1 (1-255)
Wireless host status
Open Short GI
IP bandwidth control
Open Client Isolation
DHCP server
Open WMM
Routing
Forwarding rules save
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page displays basic information connected to the wireless network for all hosts.
Network parameters
IPTV 设置 The number of hosts currently connected: 1 Refresh
wireless setting
basic settings current Receiving The number of
ID MAC address SSID
condition data packets packets sent
WPS security settings
1 34:E6:AD:2F:17:00 connection 3801 2991 MERCURY_07DF2C
wireless security settings
Wireless MAC address filtering
Wireless Advanced Settings
Wireless host status
IP bandwidth control
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Bandwidth control function can be achieved on the LAN computer Internet bandwidth control. In this page, you can enable or
Network parameters disable bandwidth control and IPTV bandwidth guarantees, and set the type and size of the bandwidth of broadband lines,
IPTV 设置 while also bandwidth control rules to add, delete and so on. Only open the master switch bandwidth control, the "Bandwidth
wireless setting Control Rules" and IPTV bandwidth guarantees to enter into force, on the contrary, the failure.
IP bandwidth control Note: When you select the type of bandwidth lines and fill in the size of the bandwidth, select it and fill in the actual
situation, such as unclear, please consult your bandwidth providers (such as Telecom, China Netcom, etc.).
DHCP server
Routing
Forwarding rules Turn Bandwidth Control
Parental Controls
Broadband lines ADSL line Other lines
Firewall
type:
IP and MAC binding
Uplink total Kbps
Dynamic DNS bandwidth:
System Management Downlink total Kbps
bandwidth:
Open IPTV bandwidth guarantees
save
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is the DHCP service settings, the router's DHCP server can automatically
Network parameters configure each computer LAN TCP / IP protocol.
IPTV 设置
wireless setting Group-owned: the Default
IP bandwidth control IP Address: 192.168.1.1
DHCP server Subnet Mask: 255.255.255.0
DHCP service settings DHCP server: Not enabled Enable DHCP Relay
Static address assignment
Address pool starting 192.168.1.100
Conditions address pool settings
address:
Client List
Address pool end address: 192.168.1.199
Routing
Address lease: 1440 (1 to 2880 minutes. The default is 1440
Forwarding rules minutes)
Parental Controls Gateway: 192.168.1.1 (Optional)
Firewall Default Domain: (Optional)
IP and MAC binding Primary DNS server: 0.0.0.0 (Optional)
Dynamic DNS Alternate DNS server: 0.0.0.0 (Optional)
System Management
save
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to view the current DHCP server to static address assignment, and by clicking on the
Network parameters appropriate button for static address assignment parameter settings.
IPTV 设置
wireless setting MAC address IP address Group-owned status edit
IP bandwidth control
DHCP server
Add a new entry into force of the selected entry
Failure selected entry
Delete selected entry
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to view the current condition of the DHCP server address pool settings, and by clicking on the
Network parameters appropriate button to set the conditions for the address pool parameters.
IPTV 设置
wireless setting Vendor ID Start address / end address equipment Group-owned status edit
IP bandwidth control
DHCP server
Add a new entry into force of the selected entry
Failure selected entry
Delete selected entry
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to view client information for the current DHCP server.
Network parameters
IPTV 设置 ID Client name MAC address IP address Effective time
wireless setting 1 lenovo 34:E6:AD:2F:17:00 192.168.1.104 23:41:06
IP bandwidth control
DHCP server
Refresh
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is the default route settings, select a WAN interface as the default route.
Network parameters
IPTV 设置 Choose WAN pppoe_0_35_2
wireless setting interfaces:
IP bandwidth control
DHCP server save
Routing
Default routing setting
Static Routing Table
RIP Settings
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to view the current static routing table information, and by clicking on the appropriate
Network parameters button for static routing table configuration.
IPTV 设置
wireless setting Destination network
Subnet Mask Gateway status edit
IP bandwidth control address
DHCP server
Add a new entry into force of the selected entry Failure selected entry Delete selected entry
Routing
Default routing setting Refresh
Static Routing Table
RIP Settings
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to configure RIP features WAN connection.
Network parameters
Note: To make RIP configuration to take effect, ensure that the appropriate WAN connection is not enabled
IPTV 设置 NAT function.
wireless setting
IP bandwidth control name version mode Enable
DHCP server
Save
Routing
Default routing setting
Static Routing Table
RIP Settings
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Virtual Server defines the mapping between the service port WAN and LAN server, access to all of the WAN
Network parameters service port will be relocated to an assigned IP address on your LAN.
IPTV 设置
wireless setting Service Port IP address protocol status WAN Interface edit
IP bandwidth control
DHCP server
Add a new entry into force of the selected entry Failure selected entry Delete selected entry
Routing
Refresh
Forwarding rules
virtual server
Special Applications
DMZ Host
UPnP settings
Application Layer Gateway settings
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Some programs require multiple connections, such as Internet gaming, video conferencing, Internet
Network parameters telephony and so on. Because of the firewall, these programs do not work in a simple NAT routing. Special
IPTV 设置 Applications makes some of these applications to work under NAT routing.
wireless setting
IP bandwidth control Trigger Triggered Open
Open ports status edit
Port protocol protocol
DHCP server
Routing
Add a new entry into force of the selected entry Failure selected entry Delete selected entry
Forwarding rules
virtual server Refresh
Special Applications
DMZ Host
UPnP settings
Application Layer Gateway settings
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
In some special cases, we need to let a computer local area network completely exposed to
Network parameters the wide area network, in order to achieve two-way communication, then the computer can
IPTV 设置 be set to the DMZ host.
wireless setting
IP bandwidth control DMZ Status: Enable Not enabled
DHCP server
DMZ Host IP 0.0.0.0
Routing
Address:
Forwarding rules save
virtual server
Special Applications
DMZ Host
UPnP settings
Application Layer Gateway settings
Parental Controls
Original text
Firewall
DMZ主机
IP and MAC binding
Dynamic DNSContribute a better translation
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Page Settings / Display UPnP settings and work status.
Network parameters
IPTV 设置 Current UPnP Close Open
wireless setting Status:
IP bandwidth control
DHCP server UPnP current list of rules
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Turn the page face each application layer gateway on and off set.
Network parameters
IPTV 设置
Virtual Private Network
wireless setting
(VPN)
IP bandwidth control
PPTP Enable Not enabled
DHCP server penetration:
Routing L2TP Enable Not enabled
Forwarding rules penetration:
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
As a parent, you can page through this setup, control children's online behavior, so that
Network parameters the child's PC can only access the specified site at a specified time.
IPTV 设置
wireless setting Open Parental Controls
IP bandwidth control
Parents PC's MAC address:
DHCP server
Current PC's MAC address: 34:E6:AD:2F:17:00 Set Parental PC
Routing
Forwarding rules
save
Parental Controls
Firewall
Children MAC address - 1:
IP and MAC binding
Children MAC address - 2:
Dynamic DNS
Children MAC Address - 3:
System Management
Children MAC Address - 4:
time 0:00 1:00 2:00 3:00 4:00 5:00 6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00
Sunday
on Monday
on Tuesday
on
Wednesday
Thursday
Friday
on
Saturday
Empty timetable
details
save
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
The router can limit the online behavior of network hosts. In this page, you can turn on or turn off this feature, and set
Network parameters the default rule. More efficient, you can set up a flexible combination rule by selecting a suitable "host within the
IPTV 设置 network," "external host", "schedule", a complete and powerful access control rules.
wireless setting
IP bandwidth control Open Firewall
DHCP server
Routing Default filtering rules:
Forwarding rules Those who do not meet the access control rules have been set up packet allowed through this route
Parental Controls Those who do not meet the access control rules have been set up packet prohibited by this route
Firewall
Rules Management save
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Network parameters Item Description Address information edit
IPTV 设置
wireless setting Add a new entry to delete the selected entry
IP bandwidth control
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
Rules Management
Host within the network
External host
Schedule
Attack Protection Original text
IP and MAC binding
内网主机
Dynamic DNS
Contribute a better translation
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Network parameters Item Description details edit
IPTV 设置
wireless setting Add a new entry to delete the selected entry
IP bandwidth control
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
Rules Management
Host within the network
External host
Schedule
Attack Protection
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Network parameters Item Description edit
IPTV 设置
wireless setting Add a new entry to delete the selected entry
IP bandwidth control
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
Rules Management
Host within the network
External host
Schedule
Attack Protection
IP and MAC binding
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to set DDOS function parameters.
Network parameters
IPTV 设置 DOS Protection: Open shut down
wireless setting (Note: When the traffic statistics Open DOS protection to take effect.)
IP bandwidth control
DHCP server Open filter ICMP-Flood Attack
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page displays a static ARP List, and set rules for matching the MAC address and IP
Network parameters address through the appropriate button.
IPTV 设置
wireless setting ARP Enable Not enabled saved
IP bandwidth control binding:
DHCP server
MAC address IP address status edit
Routing
Forwarding rules Add a new entry into force of the selected entry
Failure selected entry
Delete selected entry
Parental Controls
Firewall Refresh
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Network parameters MAC address IP address status
IPTV 设置 Not
34:e6:ad:2f:17:00 192.168.1.104
wireless setting imported
IP bandwidth control
Import selected item
to delete the selected entry
DHCP server
Routing Refresh
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Static ARP binding settings
ARP mapping table
Dynamic DNS
System Management
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Page Settings "Oray.net peanut shell DDNS" parameter.
Network parameters
IPTV 设置 Service Links: peanut shell dynamic DNS service apply peanut shell
wireless setting dynamic DNS service help
IP bandwidth control
DHCP server
Service www.oray.com registered...
Provider:
Routing
username:
Forwarding rules
password:
Parental Controls
Firewall Enable
IP and MAC binding DDNS:
Dynamic DNS Connection Not connected
status:
System Management
Type of ---
service:
Domain no
Information:
Login Exit
Save
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Select the type of log you want to view: ALL Choose to view the log level: Emergency
Network parameters
IPTV 设置 Types
index time grade content
wireless setting of
IP bandwidth control
Refresh Clear log to save a log log settings
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
System Log
Diagnostic tools
Traffic Statistics
software upgrade
reset
backup and load configuration
Restart the router
Management Control
time setting
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to detect the router network connection status. Please
Network parameters select the item and click the Start diagnosis button Diagnosis.
IPTV 设置
wireless setting Diagnosis of WAN Interface Connectivity diagnostics
IP bandwidth control type selection 开始诊断
DHCP server
Routing br_0_35_0
Forwarding rules ADSL line connection status by
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page is used to display traffic statistics LAN port devices to access the external network.
Network parameters
IPTV 设置 Traffic Statistics: Enable Not enabled saved
wireless setting Statistics 10 second
IP bandwidth control interval:
DHCP server
A list of statistics:
Routing
Forwarding rules total current
IP address Byte operating
Parental Controls Packets Byte count Packets ICMP Tx UDP Tx SYN Tx
MAC address count
Firewall
The current list is empty
IP and MAC binding
Dynamic DNS
System Management Reset all Delete all refresh the page
System Log
Diagnostic tools
Traffic Statistics
software upgrade
reset
backup and load configuration
Restart the router
Management Control
time setting
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
By upgrading the router's software, you will get new features.
Network parameters
IPTV 设置 Path Software Choose file No file chosen
wireless setting The current 0.8.0 1.1 v1003.0 Build 130117 Rel.38227s
IP bandwidth control software version
DHCP server The current MD898N v1 00000001
Routing hardware version
Forwarding rules
Note: Choose consistent with the current hardware version of the
Parental Controls software upgrade. The upgrade process can not power off the router,
Firewall otherwise it will cause damage to the router can not be used. The
IP and MAC binding upgrade process for about 50 seconds when the upgrade is complete, the
System Management
upgrade
System Log
Diagnostic tools
Traffic Statistics
software upgrade
reset
backup and load configuration
Restart the router
Management Control
time setting
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Clicking this button will restore the router to factory settings.
Network parameters
IPTV 设置 reset
wireless setting
IP bandwidth control
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
System Log
Diagnostic tools
Traffic Statistics
software upgrade
reset
backup and load configuration
Restart the router
Management Control
time setting
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
You can save your settings here. We recommend that you back up your configuration file
Network parameters before modifying the configuration and software upgrades.
IPTV 设置
Backup configuration files
wireless setting
IP bandwidth control You can load the configuration file to restore your settings.
DHCP server Profile Path Choose file No file chosen Loading profile
Routing Note 1, after importing the configuration file, any original equipment
Forwarding rules user configuration will be lost. If you load the configuration
Parental Controls file is incorrect, could cause the device not be managed.
2, the process of loading the configuration file can not turn off
Firewall
the router power, otherwise it will cause damage to the router can
IP and MAC binding not be used. Loading process about 20 seconds after the end of the
Dynamic DNS load, the router will automatically restart.
System Management
System Log
Diagnostic tools
Traffic Statistics
software upgrade
reset
backup and load configuration
Restart the router
Management Control
time setting
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
Clicking this button will cause the router to restart.
Network parameters
IPTV 设置 Restart the router
wireless setting
IP bandwidth control
DHCP server
Routing
Forwarding rules
Parental Controls
Firewall
IP and MAC binding
Dynamic DNS
System Management
System Log
Diagnostic tools
Traffic Statistics
software upgrade
reset
backup and load configuration
Restart the router
Management Control
time setting
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
The current user status
Network parameters
IPTV 设置 User type: the Admin
DHCP server User Host MAC Address: 34: E6: the AD: 2F: 17: 00
Routing
Forwarding rules Manage account settings
Parental Controls
old password:
Firewall
new user name:
IP and MAC binding
new password:
Dynamic DNS
Confirm New Password:
System Management
System Log
Diagnostic tools Management Services
http://192.168.1.1/ 1/1
25/07/2016 MD898N
System Mode
This page set system time of router, you can choose your own time or obtain standard GMT time from the
Network parameters Internet.
IPTV 设置
wireless setting Time zone: (GMT + 05: 30) Madras, Calcutta, Mumbai, New Delhi
IP bandwidth control date: 2016 year 7 month 25 day
DHCP server time: 13 Time 42 Minute 54 second
Routing
Forwarding rules Priority NTP server 1:
Firewall
Get GMT time (only after connecting to the Internet to get GMT time)
IP and MAC binding
Dynamic DNS save
System Management
System Log
Diagnostic tools
Traffic Statistics
software upgrade
reset
backup and load configuration
Restart the router
Management Control
time setting
http://192.168.1.1/ 1/1