B. Shaft encoders
C. Paper-tape readers
B. 10 MHz
C. 100 MHz
D. 1 MHz
Answer: Option A
B. 0.7 V to 0.8 V
C. 0.8 V to 1.0 V
D. 1.0 V to 1.5 V
Answer: Option A
B. Positive-resistance
B. 2 pF to 10 pF
C. 2 F to 100 F
D. 2 pF to 100 pF
Answer: Option D
6. What is the maximum temperature limit for liquid-crystal displays (LCDs)?
A. 10ºC
B. 30ºC
C. 60ºC
D. 100ºC
Answer: Option C
7. Which of the following diodes is limited to the reverse-bias region in its region of operation?
A. Schottky
B. Tunnel
C. Photodiode
D. Rectifier
Answer: Option C
B. Platinum
C. Tungsten
D. Silicon
Answer: Option D
B. Varactor
C. Tunnel
B. 50 ms
C. 100 ms to 300 ms
D. 400 ms
Answer: Option C
12. What is the typical level of change in resistance per degree change in temperature?
A. 1% to 2%
B. 3% to 5%
C. 7% to 10%
D. 10% to 25%
Answer: Option B
B. 100 mV
C. 250 mV
D. 600 mV
Answer: Option D
14. This is an equivalent circuit for the ________ diode.
A. Schottky
B. Varicap
C. Tunnel
Answer: Option B
15. Which of the following semiconductor materials is (are) used for manufacturing solar cells?
A. Gallium arsenide
B. Indium arsenide
C. Cadmium sulfide
16. Which of the following semiconductor materials is (are) used in the manufacturing of tunnel
diodes?
A. Germanium
B. Gallium
D. Silicon
Answer: Option C
17. What is the power density received from the sun at sea level?
A. 10 mW/cm2
B. 100 mW/cm2
C. 500 mW/cm2
D. 1 W/cm2
Answer: Option B
18. The varicap diode has a transition capacitance sensitive to the applied reverse-bias potential
that is a maximum at zero volts and decreases ________ with increasing reverse-bias
potentials.
A. Logarithmically
B. Parabolically
C. Exponentially
Answer: Option C
19. For a 50-A unit, the PIV of the Schottky is about ________ compared to 150 V for the p-
n junction variety.
A. 25
B. 50
C. 75
D. 100
Answer: Option B
B. Platinum
C. Tungsten
D. Silicon
21. Which of the following metals is (are) used in the fabrication of Schottky diodes?
A. Molybdenum
B. Platinum
C. Tungsten
D. All of the above
Answer: Option D
B. 1 k
C. 100
D. 1
Answer: Option C
A. Schottky
B. Varicap
C. Tunnel
Answer: Option A
25. Which of the following materials is (are) used in the manufacturing of thermistors?
A. Ge
B. Si
B. 5:1
C. 10:1
D. 20:1
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 50 ms
C. 100 ms to 300 ms
D. 400 ms
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. Negative
B. Varactor
C. Tunnel
D. Power
Answer: Option C
B. current, capacitor
C. voltage, capacitor
D. current, inductor
Answer: Option C