B O N N E T C L O S U R E S F O R T H E H 2 FA M I LY O F C H O K E S
SD-9511-99
SD-9506-99
2
H2 Classic Externally Threaded Bonnet Closure
Disassembly Safety Features
Bonnet
▲ ▲ ▲
Pressure
Pressure/Monitoring
Port on Positive
Bonnet Assembly
Only Shoulder on Bonnet
Prevents O-Ring Extrusion
H2 Classic Bonnet Assembly
Shown in Closed Position
▲
▲
▲
Stainless Steel
▲ Bleeder Ball
▲ ▲
▲ ▲ ▲
Pressure
Zero Pressure
▲ SD-9534-99
▲▲ ▲ ▲
Retainer
Ring Tapered Metal-to-
Metal Seal between
Bleed Screw and
Bleed Screw Gland
▲ ▲ ▲
Bonnet Pressure Replaceable
Metal Seal
▲▲ ▲▲
▲ ▲
▲
Bonnet is Retained until
Bleed Screw is Retracted,
▲ ▲ ▲
Bonnet Clears
Zero Pressure Bleed Screw
for Safe
Removal
▲
▲
▲ ▲
▲
▲
▲▲ SD-9529-99
Temperature Classification
K* -75° 180°
L* -50° 180°
P -20° 180°
R Room Temperature
S 0° 150°
T 0° 180°
U 0° 250°
X* 0° 350°
The family of H2 chokes is ideally suited for a
-100° -50° 0° 50° 100° 150° 200° 250° 300° 350°
broad range of choke applications, including
wellheads, production manifolds, choke and kill * May require additional leadtime.
4
H2 CLASSIC CHOKE FEATURES AND BENEFITS
A D D I T I O N A L F E AT U R E S
■ H2 is designed and manufactured in
accordance with API 6A, including
performance verification testing for
PR2 level chokes
■ Forged body
■ Easy operation and maintenance
SD-9510-99
5
H2I CHOKE FEATURES AND BENEFITS
■ H2I features larger Acme threads ■ Bonnet threads are protected from
than the H2 Classic environment by three weather seals
■ Four vent holes in body allow fast ■ H2I prevents bonnet seal extrusion
venting by means of body-to-bonnet con-
tact behind the O-ring seal
A D D I T I O N A L F E AT U R E S
■ H2I is designed and manufactured
in accordance with API 6A, including
performance verification testing
for PR2 level chokes
■ H2IMS adds metal-to-metal
bonnet seal in addition to the
■ The bean/seat has been recessed in standard features of the H2I
the body below the inlet flow path
for longer life ■ Forged body
■ “Retained bonnet” closure
improves operator safety
■ Easy operation and maintenance
SD-9509-99
6
H 2 C L A S S I C C H O K E PA R T S L I S T S
1 2 3 4
H2 Classic Adjustable Choke Parts List
2" Nominal (1" Maximum Orifice) and
3" Nominal (2" Maximum Orifice)
2,000 thru 10,000 psi Working Pressure
Item API Material Class
5 Description Qty
No. AA - BB CC DD - EE FF HH
6 1 Handwheel 1 Steel Steel Steel Steel Steel
2 Instruction Plate 1 Brass Brass Brass Brass Brass
7 3 Flat Washer 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
9 8 4 Hex Bolt 1 Steel Steel Steel Steel Stainless Steel
5 Set Screw 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
10 6 Indicator 1 PVC PVC PVC PVC PVC
7 Plug* 1 Brass Brass Brass Brass Brass
11 13
8 Set Screw 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
14 Corrosion
12 9 Bonnet 1 Alloy Stainless Steel Alloy Stainless Steel
Resistant Alloy
10 Bonnet Nut 1 Alloy Alloy Alloy Alloy Alloy
PTFE & PTFE & PTFE & PTFE & PTFE &
11 Packing Assembly* 1
Elgiloy Elgiloy Elgiloy Elgiloy Elgiloy
15
12 Retainer Ring 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
16 Nitrile or Nitrile or
13 O-Ring* 1 Camlast™ Camlast™ Camlast™
Viton** Viton**
14 Junk Ring 2 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
17 15 Bleed Valve 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
19 16 Name Plate 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
18
20 17 Drive Screw 2 Steel Steel Steel Steel Steel
Stainless Steel Stainless Steel Corrosion
Stainless Steel Stainless Steel
or Stn. Steel or Stn. Steel Resistant Alloy
18 Needle Assembly*▲ 1 & Tungsten & Tungsten
& Tungsten & Tungsten Carbide Carbide & Tungsten
SD-9510-99
Carbide Carbide Carbide
Stainless Steel Stainless Steel Corrosion
Stainless Steel Stainless Steel
or Stn. Steel or Stn. Steel Resistant Alloy
19 Seat Assembly* 1 & Tungsten & Tungsten
& Tungsten & Tungsten Carbide Carbide & Tungsten
Carbide Carbide Carbide
Corrosion
20 Body 1 Alloy Stainless Steel Alloy Stainless Steel
Resistant Alloy
2 3 4
H2 Classic Positive Choke Parts List
2" Nominal (1" Maximum Orifice) and
1 3" Nominal (2" Maximum Orifice)
5
2,000 thru 10,000 psi Working Pressure
Item API Material Class
Description Qty
No. AA - BB CC DD - EE FF HH
1 Bonnet Nut 1 Alloy Alloy Alloy Alloy Alloy
6 2 Retainer Ring 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
3 Pipe Plug 1 Steel Stainless Steel Steel Stainless Steel Stainless Steel
7 Corrosion
4 Bonnet 1 Alloy Stainless Steel Alloy Stainless Steel
Resistant Alloy
8
5 O-Ring 1 Nitrile or Nitrile or
Viton** Viton** Camlast™ Camlast™ Camlast™
6 Bleed Valve 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
9 7 Name Plate 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
8 Drive Screw 2 Steel Steel Steel Steel Steel
Corrosion
9 Body 1 Alloy Stainless Steel Alloy Stainless Steel
Resistant Alloy
SD-9511-99
* Recommended spare parts; ** Choice dependant on Temperature Rating
7 NOTE: Flow beans are sold separately.
NOTE: Routine cleaning and inspection of the bonnet closure threads are recommended for longer service life.
H 2 C L A S S I C C H O K E PA R T S L I S T S
20 16 Junk Ring 2 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
17 Gland 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Stainless Steel
22 18 Blind Plug 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel or Corrosion
21 Resistant Alloy
23 19 Name Plate 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
20 Drive Screw 2 Steel Steel Steel Steel Steel
Stainless Steel Stainless Steel Corrosion
Stainless Steel Stainless Steel
or Stn. Steel or Stn. Steel Resistant Alloy
21 Needle Assembly* 1 & Tungsten & Tungsten
& Tungsten & Tungsten Carbide Carbide & Tungsten
SD-9514-99
Carbide Carbide Carbide
Stainless Steel Stainless Steel Corrosion
Stainless Steel Stainless Steel
or Stn. Steel or Stn. Steel Resistant Alloy
22 Seat Assembly* 1 & Tungsten & Tungsten
& Tungsten & Tungsten Carbide Carbide & Tungsten
Carbide Carbide Carbide
Corrosion
23 Body 1 Alloy Stainless Steel Alloy Stainless Steel
Resistant Alloy
* Recommended spare parts
NOTE: Routine cleaning and inspection of the bonnet closure threads are recommended for longer service life.
2 3 4
5
H2 Classic Positive Choke Parts List
2" Nominal (1" Maximum Orifice)
1
15,000 psi Working Pressure
Item API Material Class
7 Description Qty
6 No. AA - BB CC DD - EE FF HH
1 Bonnet Nut 1 Alloy Alloy Alloy Alloy Alloy
2 Retainer Ring 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
3 Gland 2 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
3 Stainless Steel
4 Blind Plug 2 Stainless Steel Stainless Steel Stainless Steel Stainless Steel or Corrosion
4 Resistant Alloy
Corrosion
5 Bonnet 1 Alloy Stainless Steel Alloy Stainless Steel
Resistant Alloy
6 Roll Pin 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
8 Stainless Steel
7 Bonnet Gasket* 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel or Corrosion
9 Resistant Alloy
8 Name Plate 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
10
9 Drive Screw 2 Steel Steel Steel Steel Steel
Corrosion
10 Body 1 Alloy Stainless Steel Alloy Stainless Steel
Resistant Alloy
SD-9513-99 * Recommended spare parts
NOTE: Flow beans are sold separately.
8 NOTE: Routine cleaning and inspection of the bonnet closure threads are recommended for longer service life.
H 2 I C H O K E PA R T S L I S T S
23 17 Packing Assembly 1 PTFE & PTFE & PTFE & PTFE & PTFE &
Elgiloy Elgiloy Elgiloy Elgiloy Elgiloy
27 Body 1 Corrosion
Alloy Stainless Steel Alloy Stainless Steel Resistant Alloy
9
H 2 I C H O K E PA R T S L I S T S
11 Stainless Steel
8 Metal Seal 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel or Corrosion
12 Resistant Alloy
9 Bleed Screw Assembly 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
10 Pipe Plug 1 Steel Steel Steel Steel Stainless Steel
13 11 Name Plate 1 Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
12 Drive Screw 2 Steel Steel Steel Steel Steel
Corrosion
13 Body 1 Alloy Stainless Steel Alloy Stainless Steel
Resistant Alloy
* Recommended spare parts; ** Choice dependent on Temperature Rating
SD-9506-97 NOTE: Flow beans are sold separately.
NOTE: Routine cleaning and inspection of the bonnet closure threads are recommended for longer service life.
10
TRIM SELECTION
■ All beans and seats are interchangeable Beans are available in increments of 1⁄64".
Beans & seats are available with ceramic or tungsten carbide lining.
with the H2 Classic, H2I and H2IMS.
■ The H2I and H2IMS utilize the same
longer stem/needle assembly to fit the
recessed seat feature. Flow Coefficient, Cv (Max.) for the Adjustable Chokes
■ The H2 Classic stem/needle assembly is 2" Nominal 3" Nominal 4" Nominal
shorter and therefore not interchangeable 1" Max. Orifice 2" Max. Orifice 3" Max. Orifice
Type of Trim
with the H2I and H2IMS needle assem- and Size
1" 2" 3"
blies.
■ Two wear resistant trims available: Standard Trim (Maximum Cv) 30.0 104 212
11
PHYSICAL SPECIFICATIONS
Outlet Outlet
▲ ▲
Inlet B B
Inlet
Flow
Flow
SD-016429 SD-016429
▼ ▼
A A
▼
▼
▲
12
Western Hemisphere
Cameron
PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com
Eastern Hemisphere
Cooper Cameron (U.K.) Ltd.
5 Mondial Way
Harlington
Hayes, UB3 5AR
England
Tel 011 44 181 990 1800
Fax 011 44 181 990 1888
© Cooper Cameron Corporation, Cameron Division, Printed in USA, 2/98, TG/5M, WR6856/TC255