Of
Fly-Ash Bricks Udyog
INDEX
(1) Introduction
(5) Address
(6) Constitution
(3) Address :
(4) Constitution:
OUR Fly ash brick making plant has been designed to manufacture fly ash bricks with Eco-
friendly technology. It is a simple & cost effective technology available in the
country. The heart of the plant is an indigenously designed, a relatively low
cost & high productivity machine. Other component machines of the plant
Pan Mixture, Conveyor, Pallet trucks, Wheel Borrows & wooden Pallets are
economically & efficiently designed to give a maximum output.
BRICKMACHINE
1. Brick Machine is hydraulically operated, automatic, controlled by
electronic circuits. This can be mastered with little basic electrical
knowledge.
2. Brick making machine develops 50 T of compressive force over the
bricks uniformly and hold the pressure for required time allowing the
materials to flow and form.
3. The machine structure is carefully designed to take up the heavy
cyclic loads.
4. Monogram on the brick can be embossed.
5. Very high production at relatively low cost.
PAN MIXTURE
1. A sturdily constructed machine with heavy rollers to grind and mix
the material thoroughly.
2. Drive through trouble less, quality worm reduction gear box.
3. Easy bottom unloading mechanism with door arrangement.
CONVEYOR
HOPPER
PALLET TRUCKS
Novel and ergo metric design to handle the bricks with pallets for effortless
and easy transportation of fly ash bricks with reduced labor.
Control Panel
A fully automatic FA Bricks machine includes control panel with PLC
system to help automation of raw material feeding, mixing, conveyor belt
operating to bricks formation & bricks output. One skilled worker can
handle the system & it helps in reducing of dependency on labors as well as
getting work done faster.
Al gypsum is mixed and ground to make cement.
In Fa-G mix also the fly ash witch is a burnt clay particles (Oxidizes of
clay ) obtained from burning of coal which contains clay from the mines
when hydrated lime powder, gypsum are mixed and ground in a pan mixture
gives the slow setting puzzling cement. And is also added to bring down the
cost of mix of brick in our process.
While the mix is pressed at low moisture content in the Brick Machine
which is specially and indigenously designed to give high pressure load, at
slow rate, in the order of 250 kg/ Square inch.
At this rate of pressure and with holding the pressure for a desired time gives
ultimate strength to the Fal-G bricks.
Means of Fiancé
The production per shift (8hrs) 11520 bricks requires material 31.67Ton
Weight per bricks 2.75 to 3 Kg (APPX)
Production of Bricks using LIME:
Important Note:-