0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
68 tayangan3 halaman
This document summarizes the design of a two-way slab between grid lines 18 and 19 on the first floor. The slab has an effective short span of 3.75m and long span of 5.41m. It is 150mm thick with M25 concrete and Fe500 steel reinforcement. #10mm bars spaced at 150mm are provided along the short span, while #8mm bars at 200mm are provided along the long span. Load calculations and reinforcement checks are provided to verify the design meets code requirements.
This document summarizes the design of a two-way slab between grid lines 18 and 19 on the first floor. The slab has an effective short span of 3.75m and long span of 5.41m. It is 150mm thick with M25 concrete and Fe500 steel reinforcement. #10mm bars spaced at 150mm are provided along the short span, while #8mm bars at 200mm are provided along the long span. Load calculations and reinforcement checks are provided to verify the design meets code requirements.
This document summarizes the design of a two-way slab between grid lines 18 and 19 on the first floor. The slab has an effective short span of 3.75m and long span of 5.41m. It is 150mm thick with M25 concrete and Fe500 steel reinforcement. #10mm bars spaced at 150mm are provided along the short span, while #8mm bars at 200mm are provided along the long span. Load calculations and reinforcement checks are provided to verify the design meets code requirements.
Type of slab- one way /two way. Two way Effective Span of slab along SS lx = 3.75 m Effective Span of slab along LS ly = 5.41 m ax (for ly /lx = 1.443) = 0.1011 ay = 0.0489 Clear cover = 20 mm Grade of concrete used = M25 Grade of steel used = Fe500 Diameter of bar used Along SS = 10 mm Diameter of bar used Along LS = 8 mm Bar spacing along short span = 150 mm Bar spacing along long span = 200 mm Thickness of slab provided = 150 mm
Actual load on slab
Dead Load = 3.75 kN/m2 live load = 4.00 kN/m2 Floor finish Load on slab = 1.00 kN/m2 Total load on slab = 8.75 kN/m2 Factored load 1.5(DL+LL) = 13.125 kN/m2 B.M.Calculations Maximum moment along SS Mx = ax x w x = 18.67 kN-m (From STAAD pl. 31743LC119) x l x2 = 9.02 kN-m (From STAADpl 31729 LC 125) RCC design : Effective depth of slab, d= Thk-(cover + Φ/2) 125.00 = mm Main Steel reqd Ast =(0.5fckbd/fy)(1-√1-4.6M/fckbd ) 364.74 2 = mm2 Spacing of 10mm bar required = 215.33 mm c/c > Spacing provided, OK Provide #10 @ 150 mm c/c at bottom along short span Effective depth of slab, d= Thk-(cover +Φ+Φ/2) 116.00 = mm Main Steel reqd Ast =(0.5fckbd/fy)(1-√1-4.6M/fckbd )184.71 2 = mm2 Spacing of 8mm bar required = 272.13 mm c/c > Spacing provided, OK Provide #8 @ 200 mm c/c at bottom along long span Distr. Steel for provided grade of steel = 0.12 % Min. Ast along long span = 180.00 mm2 < Ast requd, OK Bar spacing for Ast min = 279.25 mm c/c Deflection check fs = 0.58 fy Ast reqd/Ast prov = 416.30 N/mm2 Percentage of tension reinforcement = 0.35 % Modification factor from table 4 IS 456 20 = 1.100 Depth required for continuous span = 131.12 mm Increase depth AD pl. 31743LC119) ADpl 31729 LC 125)