show ip route
CAMBIAR NOMBRE DEL ROUTER
hostname B1
CONTRASE�A DEL MODO EXEC
enable secret CONTRASE�A (class)
CONTRASE�A DE CONSOLA DEL ROUTER
line console 0
pass cisco
login
logging synchronous
exit
DESHABILITAR DNS
no ip domain-lookup
PONER BANNER
banner motd
CONTRASE�A PARA LINEA DE TERMINAL VIRTUAL (vty)
line vty 0 4
pass cisco
login
logging synchronous
exit
CONFIGURACION INTERFAZ ETHERNET
interface fastethernet 0/0
ip address 192.168.1.1 255.255.255.128
no shutdown
description CONEXION B1-LAN1
exit
ENLACE WAN
INTERFAZ SERIAL 2/0 DCE
interface serial 2/0
ip addres 192.168.1.226 255.255.255.252
clock rate 64000
no shutdown
description ENLACE B1-HQ
INTERFAZ SERIAL 2/0 DTE
interface serial 2/0
ip address 192.168.1.225 255.255.255.252
no sh
description ENLACE HQ-B1
GUARDAR LA CONFIGURACION desde modo privilegiado
copy running-config startup-config
EXAMINAR CONFIGURACIONES
show interfaces
show interface
show running-config
VERIFICACION DE INTERFACES
show interfaces fastethernet
INTERFACE DE LOOPBACK
HQ(config)#interface loopback 1
HQ(config-if)#ip addr 209.165.200.225 255.255.255.252
HQ(config-if)#no ip addr 209.165.200.224 255.255.255.252
HQ(config-if)#exit
HQ(config)#ip route 0.0.0.0 0.0.0.0 loopback 1
HQ(config)#exit
CONFIGURACION EIGRP
Router>enable
Router#configure termina
Router(config)#router eigrp 1 // El 1 es el numero de id de proceso o
sistema aut�nomo
Router(config-router)#network [IP DE RED] dircta wilcard
Router(config-router)#passive-interface fa0/0
Router(config-router)#no auto-summary
Router(config-router)#exit
CONFIGURACION OSPF
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router ospf 1
Router(config-router)#network 192.168.0.0 0.0.0.255 area 0 // wildcard contrario a
mascara de red ejemplo 255.255.255.0 ----->0.0.0.255
Router(config-router)#network 10.10.10.0 0.0.0.3 area 0
Router(config-router)#network 10.10.10.16 0.0.0.3 area 0
Router>en
Router#config
Configuring from terminal, memory, or network [terminal]? terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface serial 0/1/0
Router(config-if)#bandwidth 50
Router(config-if)#interface serial 0/1/1
Router(config-if)#bandwidth 10000
Router(config-if)#
comprobacion de protocolos
RIPv1
EIGRP