CONTENTS
WARNING P02.03
COMPONENTS P06
FIRING P14.15
MAINTENANCE P20
www.guay2.com
1
Operation of this air gun for competition use is restricted to users of 18 years Adult supervision required.Always wear safety goggles when shooting.Misuse or careless use may
old or more.careless shooting and wrong operation are dangerous,causing case injury.May be dangerous up to 50 meters.Read all instructions before using the airsoft gun.The
eye damage or other injury. purchaser and user should conform to all laws governing use and ownership of airsoft guns.
WARNING
WARNING
You may be liable for damaging public or personal Select a safe place for operating the air gun,avoid Looking into the muzzle is extremely dangerous Activating the trigger carelessly is extremely
property or for injuring a person or an animal even if places where people and cars are around. regardless of BBs having been loaded or not.If dangerous.Never put your finger on the trigger
you only meant to shoot as a "practical joke."Always you get hit in the eye by a BB pellet,you may in unless the safety cap is removed and you are
observe good manners and enjoy fun sport shooting. worst case,loose your eye sight. ready to shoot a target.
SAFTY ON 2
BAT
3 4 TER
Y
Safety procedures: When you carry the air gun,attach the safety There may be cases where some BB’s remain in the Disassembling or modifying the gun may
1.Attach the safety cap to the muzzle. cap,set the selector lever to the safety position gun after the magazine has been removed. adversely affect the performance and make it
2.Set the selector lever to the safety position. and always put the air gun in a case or bag. After removal of the magazine,direct the muzzle dangerous.”It may be against the Law.”
3.Remove the magazine. towards a safe direction and pull the trigger to
When shooting the air guns for target practice Always attach the safety cap to the muzzle,remove Never direct the muzzle towards a person,animal Make sure to put the barrel and safety cap on the
or in a game situation,you and all participants the battery and store the air gun in a case or bag or in any direction.That may cause harm or muzzle,except when you are shooting.Do this to
must wear safety goggles or other eye protective and at a place that is out of reach by children. damage to the third party. prevent accident,discharge of BB’s and also for
g e a r. A l s o , p a y a t t e n t i o n t o r i c o c h e t s . I t i s v e r y dust protection purpose.Never pull the trigger
important to pay attention to third parties other than while the barrel and the safety cap is attached.
the participants.
2 www.guay2.com www.guay2.com
3
ABOUT SCAR EVOLVEMENT OF SCAR
issued a SOF Combat Assault Rifles (SCAR) project. The key idea of SCAR
project is that it will open a new kind of combat rifle to provide SOF with wide
variety of options.
ABOUT SCAR
ABOUT SCAR
PROTOTYPE
options for different combat situation. The SCAR has two kinds, SCAR-Light
and SCAR-Heavy. Both of the two kinds SCAR are available in three version,
Standard, Close Quarters Combat, and Sniper Variant. (Different version fit
different QD barrel)
A TRANSITIONAL PERIOD
And the SCAR will be fitted with removable、adjustable、iron sights with folding
diopter-type rear sight on the receiver rail. Any additional type of sighting
equipment can be installed using M1913 Pica Tinny rail on the top receiver, and
handguard.
4 www.guay2.com www.guay2.com
5
6
SELECTOR AND SAFETY SETTING
5
Always set the safety lever to safety mode setting until immediately before firing
4
CAUTION S e t t h e s e l e c t o r i n c o r r e c t p o s i t i o n ; o t h e r w i s e m a l f u n c t i o n m a y o c c u r.
3
8
7
1 10
2
15
14
COMPONENTS Cleaning Rod The gun will fire one shot each time as pull the trigger.
no Parts no Parts
1 Flash Suppressor 11 Stock cover FULLY AUTOMATIC MODE
2 Outer Barrel 12 Butt Stock automatic firing
3 Folding Front Sight 13 Folding Rear Sight
The gun will fire automatically while the trigger remains
4 Rail System 14 Selector pulled.
5 Magazine Release 15 Cocking Lever
6 Cheek Piece Release Button 16 Bolt CAUTION
7 Stock Plate Lock Pin 17 Magazine Catch Button
8 Stock Lock Button 18 Magazine Never operate the Selector while pulled the trigger.
9 Rear Sight Hook(Left Side) 19 Tigger Guard Otherwise,malfunctions may occur.
10 Trigger 20 Grip Pulling the trigger with the Selector being set at safe mode may damage the air gun.
6 www.guay2.com www.guay2.com
7
INSTALLING BATTERY ONE POINT ADVISE
Follow the below steps for charging the battery The conventional mini battery can also be used by the same wiring method
Step 1 Step 4
9.6V 1800MAH(SANYO)
NO:G-11-006
Direct the muzzle towards a safe Please use only 9.6V battery, If
direction and set the selector to the you use the different voltage battery,it
Safety position.The magazine should may damage the Gear box and motor.
be removed before changing the 9.6V 600MAH(SANYO) Use only the G&G battery purchased
NO:G-11-004
battery. from your local dealer.
Step 2 Step 5
2
Press 1
INSTALLING BATTERY
INSTALLING BATTERY
1. Press the Stock Release Button and
pulled the Stock to Max level.
2. Take off the pin.
3. Take off the stock cover. Connect the connector.
Step 3 Step 6
8 www.guay2.com www.guay2.com
9
SETTING THE MAGAZINE SIGHT ADJUSTMENT
Make sure to set the magazine upwards.It is securely installed when you heard a click sound.
Confirm that the safety lever is set to the Safey position and do not place
CAUTION CAUTION Make sure not to loose the adjustment tool.
y o u r f i n g e r o n t h e t r i g g e r.
LEFT
up down
�
�
�
�
�
�
1 RIGHT
LEFT RIGHT
2 Pull on the
magazine to
release
DOWN UP
LEFT RIGHT
RIGHT
TIGHT
SETTING THE MAGAZINE
TIGHT
Hexagon key(3.0mm)
SIGHT ADJUSTMENT
LOOSE
Step 3 Step 4 DOWN UP
LOOSE
10 www.guay2.com www.guay2.com
11
MOVABLE PARTS MOVABLE PARTS
When extending the stock,be aware of the moving part.
2
2
1
Press
1
Step 1 Step 4
LENGTHEN THE STOCK THE FOLDING FRONT SIGHT SET
1. Press the Stock Release Button to unlock. 1. Push the front sight folding button.
2. Pull the Stock to the desired position(6 positions). 2. Press against the folding front sight.
CHEEK PIECE ADJUSTMENT SET Step 2 THE FOLDING REAR SIGHT SET Step 5
1 2
Hexagon key(3.0mm)
2
LOOSE
1
TIGHT
Step 3 Step 6
MOVABLE PARTS
FOLDING BUTT STOCK SET RELOCATE REAR SIGHT
MOVABLE PARTS
12 www.guay2.com www.guay2.com
13
FIRING
FIRING
FIRING FIRING
1.AFTER OPERATION
�
�
�
�
Remove the magazine and dry fire the gun in the semi auto mode directing the muzzle to a
�
�
safe direction. Set the selector to the safe position.
�
�
Click �
Always disconnect the battery and attach the protective cap whenever you do not operate the air gun.
Make sure to install the magazine upwards Remove the protective cap only when you Give the air gun a rest for 5 to 10 minutes after firing about 500 rounds,in order
a n d i n t o t h e b o d y. I t h a d b e e n i n s t a l l e d are ready for firing the gun. to ensure long service lives of the motor and battery.
properly when you heard a click sound.
3.WHEN BULLETS ARE CLOGGED
If bullets are clogged, remove the BB and apply a few drops of G&G silicone
Set the Selector
oil into the chamber from the magazine entranceas apply G&G silicone oil for
Lever to Semi or
0.5 to 1 sec,to obtain smooth continuous firing.
Full Auto.
P u l l t h e t r i g g e r.
�
�
�
�
�
�
Step 4
Activating the trigger carelessly is extremely dangerous. Never place your finger on
the trigger unless the protective cap is removed and you are ready to shoot a target.
A blank firing may occur when triggered, this is a normal operation of the gun.
CAUTION
CAUTION Make sure no dirt gets into the chamber to avoid clogging of pellets.
There are possible cases that no firing occurs after pulling the trigger in Hop-up may be unstable for 200 to 300 rounds after using silicone oil, this is
shots in the full auto mode and then return to the semi auto operation. Never use CRC-556, WD40 or other corrosive lubricant.
14 www.guay2.com www.guay2.com
15
HOP-UP ADJUSTMENT SETTING THE BIPOD GRIP
1. Pulling the Charging Handle backward. 1. Press the buttom to expand Foot rest.
HOP-UP ADJUSTMENT
PRESS HERE
TIGHT
loose
NORMAL HOP
Best position.
CAUTION
Never hold the gun sideways as the BB pellets will curve right or left.This is
due to the HOP-UP system.
16 www.guay2.com www.guay2.com
17
SCAR-23
SCAR-01 SCAR-04
SCAR-25
SCAR-12 SCAR-24
SCAR-31
SCAR-26
SCAR-34
SCAR-35
SCAR-37
SCAR-27 SCAR-36
SCAR-40
SCAR-38
SCAR-07 SCAR-33
PARTS LIST
SCAR-08 SCAR-41
SCAR-28
SCAR-39
SCAR-14
SCAR-02
SCAR-05
SCAR-18
SCAR-47
SCAR-42
SCAR-13
SCAR-06 SCAR-09
SCAR-44
SCAR-16 SCAR-10
SCAR-43
SCAR-17
SCAR-20
SCAR-15
SCAR-13
Yo u c a n b u y a l l o f p a r t s g r o u p f r o m G & G t e c h n o l o g y s u p p o r t D e p .
E-Mail:support@guay2com
18 19
MAINTENANCE TROUBLE CLINIC
TROUBLE CLINIC
Something is jammed in the inner barrel Use the cleaning rod and clean the inner barrel.
Shooting distance becomes
shorter Faulty BB pellets (too small or heavy) Use the genuine G&G Pellets.
Drop s few drops of silicone oil from upper the
Shortage of silicone oil
chamber.
Gear problem caused by too many blank
firing
Worn or damaged gear
REMOVING CLOGGED BULLETS Too loud operating noise Gear problem caused by too many blank
Consult your dealer or G&G for overhaul
maintenance,part replacement (gear,etc.) or repair.
firing
1. Return the hop up dial to the Nomal position and insert the cleaning rod from the lead edge
Damaged or worn chamber set.
of the barrel. Pullets being follen out from
No hop setting. Turn the hop adjustment lever toward Hop.
barrel end
Faulty BB Pellets (too small ). Use the G&G Pellets.
Stop operation immediately,disconnect the battery,wipe off water from inside the main body
If gun gets wet and the battery.After completely dry,carry out trial firing.If the unit is not operational,please
contact your local dealer for repair.
20 www.guay2.com www.guay2.com
21
MEMO
DISCIAIMER
The purchaser and user should conform to all laws governing and ownership of airsoft guns.
All products in this catalog are imitation firearms and are not intended nor represented to be
Product names are trademarks of G&G,which has no affiliation to,and is not associated,or
sponsored by any manufacturer of actual or imitation firearms.Products may vary form those
pictured.
DEALER
Please consult your dealer or G&G for overhaul maintenance and technical guidance.
22 www.guay2.com www.guay2.com
23