ROADMAX
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
CONTROL &
HANDLEBARS
CABLES
FOOT
CONTROLS
TIRES &
WHEELS
FRAMES &
FENDERS
49-8736 TANKS &
OIL SYSTEMS
SUSPENSION
49-8738
BRAKE
INSTRUMENT
& LIGHTING
ELECTRICAL/
IGNITION
VALVE
TRAIN
ENGINE
PRIMARY
DRIVE
TRANNY
FINAL
DRIVE
GASKETS &
HARDWARE
49-8741
SECURITY
& COVERS
49-8742 TRAILERS
& RAMPS
CHEMICAL
ROADMAX TRANSMISSIONS
• Chrome-plated top covers, side covers, shift lever and hardware TOOLS &
• Full size gear and shafts SUPPLIES
• The gears and shafts are bobbed, ground and machined from 8620 chrome moly steel GENERAL
• The gears are back cut for smooth reliable shifting ACCESSORIES
• The cases are cast and machined with access for electronic speedometer sending units
• These transmissions come complete with push rod installed along with a 32 tooth steel drive pulley HEADGEAR
• Shipped dry
RIDING
• 5-Speed models utilize stock gear ratios APPAREL
• 6-speed models utilize a 2.94:1 1st gear ratio, stock ratios on 2nd - 5th
and a .86:1 6th gear ratio CASUAL
• 3-year, unlimited mileage limited manufacturer’s warranty APPAREL
Application Natural Retail Black Retail Polished Retail DISPLAY &
87-99 Softail 5-Speed Complete Transmission 49-8730 $899.99 49-8731 $899.99 49-8732 $999.99 PROMO
87-99 Softail 5-Speed Right Side Drive Complete Transmission 49-8734 1349.99 CROSS
87-99 Softail 6-Speed Complete Transmission 49-8738 999.99 49-8736 999.99 49-8737 1099.99 REFERENCE
87-99 Softail 6-Speed Right Side Drive Complete Transmission 49-8742 1749.99 49-8741 1799.99
793
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
BAKER ™
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
CABLES
FOOT
CONTROLS
TIRES &
WHEELS
FRAMES &
FENDERS
TANKS &
OIL SYSTEMS
SUSPENSION 41-0919
BRAKE
INSTRUMENT
& LIGHTING
ELECTRICAL/ BAKER™ TORQUE BOX BAKER™
IGNITION • All stock H-D and aftermarket transmissions have a center DROP STARTER
distance of 2.5”. By increasing the center distance 20% to 3.0”
VALVE
TRAIN the torque conservatively increases the torque capacity to DSSC SLAM CLUTCH
250 ft.-lbs DSSC is a complete RSD drivetrain system and is compatible,
ENGINE • The Torque Box is available as a 5 or 6-speed, left or right side without modification with Daytec, Rolling Thunder and similar
drive. The 6-speed is identical to the 5-speed except for the RSD Softail and Hardtail frames with zero engine offset and a
PRIMARY addition of 2 gears and a different drum. The right side drive 1/2” left tranny offset. The 1/2” offset is built into the inner
DRIVE
version is the same as the left except for the mainshaft primary; no spacer required. DSSC is set up for 240/250 tire
• Gear ratio’s R-Ratio 1st 2.75, 2nd 2.05, 3rd 1.55, 4th 1.18, applications using 1-1/2” belt. 280 and 300 tire applications
TRANNY are possible with 530 O-ring and an offset sprocket.
5th 1.00 and 6th .86
FINAL • All frame, starter and clutch interfaces are identical to stock
DRIVE 2.5” based designs DSSC Features:
• 2 rail shift fork system with common fork used 3 times • RSD6 6-speed gearset with 2.3” shorter mainshaft
GASKETS & • 43 tooth sprocket-basket with 9 friction plates
HARDWARE • 2” diameter shift drum suspended by 2 radial ball bearings
mounted to a fixed spindle axis • 28 tooth motor sprocket; no compensator
SECURITY • 88 pitch 428-2 double row chain
& COVERS • Ratchet pawl has overshift inhibitor (up and down) and is
mounted on 2 radial ball bearings. Shift lever shaft cross • O.E. type chain adjustment and shoe
TRAILERS
sectional area is 65% larger than stock • Stock-like 1.54 ratio primary reduction
& RAMPS • Doweled top cover for positive location
• Frictionless detent system. A 3/8” primary ball bearing is
cradled by and rolls on 50 secondary micro ball bearings. In • Compatible with Spyke starters (not included)
CHEMICAL
turn, the cradle is part of a plunger that actuates during shifting • 66 tooth ring gear for big motors
TOOLS & and is guided by a tertiary linear micro ball bearing system • No jackshaft on the starting system
SUPPLIES • Ignition kill and neutral switches top mounted for easy dwell • Hydraulic clutch actuator has a 1.5” piston mechanical clutch
timing adjustment actuator compatible with stock cables
GENERAL
ACCESSORIES • Shift system lever ratio is 35% less than stock. Bearing mounted • With or without neutral switch
shift shaft yields low system hysteresis, resulting in short, • Special Order Only
HEADGEAR tight shifts Description P/N Retail
• Shaft material is 9310. Gear material is 8620. Very large Polished with Mechanical Shroud 49-6526 $5995.00
RIDING Polished with Hydraulic Shroud 49-6525 5995.00
APPAREL 8.125 diameter pitch gear teeth. 2 times thicker than stock.
Tooth flanks are finished-ground after heat-treated
CASUAL • Housing is all billet construction from 6061-T651 aluminum
APPAREL
• Fits Softail models and custom applications
DISPLAY & • Special Order Only
PROMO Description P/N Retail
CROSS Right Side Drive 5-Speed 41-0916 $5195.00
REFERENCE Right Side Drive 6-Speed 41-0917 5595.00
794 Left Side Drive 5-Speed 41-0918 4695.00
Left Side Drive 6-Speed 41-0919 5095.00
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
BAKER ™
BAGGER
WINDSHIELDS
BAKER™ DD7 DIRECT DRIVE
SEATS &
COMPLETE TRANSMISSIONS LUGGAGE
DD7 Direct Drive 7-Speed is being developed as a direct
replacement of the Cruise Drive Harley-Davidson® factory 6-speed EXHAUST
to improve it in many ways besides just adding another gear.
DD7 Features: FUEL & AIR
• Ease of finding neutral
• Smooth shifting CONTROL &
• No clunks or jerky shifts HANDLEBARS
• Utilizes ball bearing linear detent in the top cover that was
originally designed for the automotive O.E.M. (similar to the CABLES
Torque Box) FOOT
• Comes ready to slide in the bike, no case modifications, 41-0990 CONTROLS
shimming of the gearset or adjustments required
TIRES &
• 7th main drive gear, main drive gear bearing, main drive seal, WHEELS
included to replace 6th main Stay in the best power range: Many complain that the factory
• 12pt bolts for door, top cover and stock side cover FRAMES &
1st gear is too tall and these bikes feel bogged-down at the FENDERS
• Re-uses stock shifter pawl. Includes new main drive gear stoplight. The DD7 has a shorter 1st gear for improved get-up-
bearing and seal, door gasket, side cover gasket, and top TANKS &
and-go. OIL SYSTEMS
cover gasket Because of the shorter first gear and following gear ratios, testers
• Baker™ Re-Cal Box and Leads included report that the bike feels like motor work has been done. The shift SUSPENSION
• Utilizes F6F Door Bearing Retainer Plate quality is unheard of as well.
• DD7 door bearings are 28% wider than stock
• Trap door is available in wrinkle black at no additional cost BRAKE
The Harley-Davidson® factory 6-speed ratios are: 1st (3.34),
• Fits 06-09 Dyna; 07-09 Softail, Touring models 2nd (2.30), 3rd (1.71), 4th (1.41), 5th (1.18), 6th (1.00). INSTRUMENT
Description P/N Retail The Baker™ DD7 transmission will have the following ratios: & LIGHTING
Chrome 41-0990 $2995.00 1st (3.76), 2nd (2.75), 3rd (2.06), 4th (1.55), 5th (1.27), ELECTRICAL/
Black 41-0991 2995.00 6th (1.10), 7th (1.00). IGNITION
VALVE
TRAIN
ENGINE
BAKER™ DD6 DIRECT DRIVE PRIMARY
COMPLETE TRANSMISSIONS DRIVE
DD6 Features:
• Full width Baker™ ground gears finished by TRANNY
diamond coated tooling
• Helical 4th, 5th and 6th gears for silent operation FINAL
DRIVE
• Fixed spindle shift drum for smooth, low inertia, drum indexing
• Redundant neutral detent for positive neutral finding GASKETS &
• Chrome trap door with engraved DD6 logo 49-9573 HARDWARE
• Anti-overshift ratchet pawl included SECURITY
• By design, the 28 tooth compensating sprocket yields 14% & COVERS
more starter system torque 41-0906 TRAILERS
• Special Order Only & RAMPS
Application Natural Retail Black Retail Polished Retail Chrome Retail
2.94 1st Close Ratio CHEMICAL
93-97 FLH, FLT Models 41-0908 $3820.00 41-0907 $3820.00 41-0911 $4150.00 TOOLS &
99-00 FLH, FLT Models 41-0899 3820.00 41-0901 3820.00 41-0903 4150.00 SUPPLIES
02-06 FLH, FLT Models 41-0893 3820.00 41-0894 3820.00 41-0895 4150.00
GENERAL
3.24 1st Stock Ratio ACCESSORIES
90-97 Softail Models 49-9561 $3495.00 49-9559 $3495.00 49-9563 $3820.00
00-06 Softail Models 49-9567 3495.00 49-9565 3495.00 49-9571 3820.00 49-9573 $4045.33 HEADGEAR
93-97 FLH, FLT Models 41-0913 3820.00 41-0912 3820.00 41-0914 4150.00
99-00 FLH, FLT Models 41-0904 3820.00 41-0905 3820.00 41-0906 4150.00 RIDING
02-06 FLH, FLT Models 41-0896 3820.00 41-0897 3820.00 41-0898 4150.00 APPAREL
CASUAL
APPAREL
DISPLAY &
PROMO
CROSS
REFERENCE
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
BAKER ™
BAGGER 41-0873
WINDSHIELDS
BAKER™
6-SPEED COMPLETE TRANSMISSION
SEATS & • The Baker™ roller detent shift system provides smooth shifts
LUGGAGE • Bronze shift forks are thicker than stock
• Beautiful show-chrome 6061-T6 trap door
EXHAUST
• Quiet Baker™ ground gears
• Redundant neutral detent to improve neutral finding
FUEL & AIR • Fits Softail models
CONTROL &
• Special Order Only
HANDLEBARS Billet Billet
Application Natural Black Polished Polished Chrome Chrome
CABLES 2.94 1st Close Ratio 41-0931
90-97 Softail Models 41-0873 41-0875 41-0877
FOOT 98-99 Softail Models 41-0879 41-0881 41-0883
CONTROLS 00-06 Softail Models 41-0926 41-0931 41-0935 41-0938
TIRES & 3.24 1st Stock Ratio
WHEELS 90-97 Softail Models 41-0874 41-0876 41-0878
FRAMES & 98-99 Softail Models 41-0880 41-0882 41-0884
FENDERS 00-06 Softail Models 41-0928 41-0933 41-0936 41-0939
‘R’ Ratio
TANKS & 00-06 Softail Models 41-0929 41-0934 41-0937 41-0941
OIL SYSTEMS Retail $3375.00 $3375.00 $3535.00 $4035.00 $3605.00 $4095.00
SUSPENSION
BRAKE 41-0800
INSTRUMENT
& LIGHTING
ELECTRICAL/
IGNITION
VALVE 41-0810
TRAIN
ENGINE
PRIMARY
DRIVE BAKER™ 6-SPEED BUILDERS KIT
• Convert an existing 5-speed to 6-speed
TRANNY • Includes a complete gear set, side door, shift drum, forks,
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
BAKER ™
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
CONTROL &
HANDLEBARS
BAKER™ RIGHT SIDE DRIVE CABLES
5 & 6-SPEED COMPLETE TRANSMISSIONS FOOT
• Allows for fat tire applications CONTROLS
• Reverses transmission output to right hand side
• High quality machined/hardened gears Pulley cover/actuator shown, sold separately TIRES &
• Polished door WHEELS
• ‘R’ ratio is a 2.82 ratio 1st gear and 2.08 ratio 2nd gear as compared to FRAMES &
the 2.94 1st gear and 2.21 2nd gear that are typically used in performance applications FENDERS
Billet Billet TANKS &
Ratio Polished Retail Polished Retail Chrome Retail OIL SYSTEMS
5-Speed Softail Models
2.94 Stock Ratio 41-08171 $2875.00 41-08201 $3125.00 41-08231 $3315.00 SUSPENSION
3.24 Close Ratio 41-08181 2875.00 41-08211 3125.00 41-08241 3315.00
‘R’ Ratio 41-08191 2875.00 41-08221 3125.00 41-08251 3315.00 BRAKE
6-Speed 2.94 Close Ratio
INSTRUMENT
Softail Models 41-0890 $3845.33 41-0828 $4095.00 41-0829 $4295.00
& LIGHTING
Twin Cam Models 41-08301 3845.00 41-08311 4050.00
1
Special Order Only ELECTRICAL/
IGNITION
VALVE
TRAIN
CHEMICAL
TOOLS &
BAKER™ RIGHT HAND DRIVE SUPPLIES
CLUTCH RELEASE ASSEMBLY GENERAL
ACCESSORIES
• For custom, right-hand-drive applications
• Pulley cover/actuator triple chrome-plated HEADGEAR
• Hydraulic includes cover, slave piston assembly and right hand
side clutch pushrod RIDING
• Mechanical includes cover, mechanical ball and ramp APPAREL
mechanism and right side clutch pushrod CASUAL
Description P/N Retail APPAREL
Hydraulic DISPLAY &
Chrome 41-0805 $535.00 PROMO
Polished 41-08261 535.00
Hydraulic Mechanical Mechanical CROSS
Chrome 41-07441 $535.00 REFERENCE
Polished 41-08271 535.00 797
1
Special Order Only
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
BAKER ™
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
CONTROL &
HANDLEBARS
TIRES & • Stock 32 tooth Harley pulley weighs 5.2 Ibs compared to • Baker recommends long-life pulleys for performance
WHEELS applications where 100,000 mile+ pulley life is required
32 tooth race pulley weighing 2.0 lbs; a 61% weight savings.
FRAMES & This weight difference means much less flywheel effect and • Designed for long distance touring applications with mild to
FENDERS allows your engine to rev quicker moderate engine performance upgrades
TANKS & • Absolutely required for performance applications Sportster
OIL SYSTEMS • Race pulleys are hard anodized for wear resistance and • Stock Sportster/Buell transmission pulleys are made of cast iron
corrosion protection in 27 and 29 tooth configurations.
SUSPENSION Sportster • Replace your stock 27 tooth pulley with this 26 for an instant
• The 26-tooth race pulley is designed for performance only 4% increase in torque to the rear wheel. Similar increase if you
BRAKE • The extreme weight savings of this design greatly reduces the replace your 29 with the 28
flywheel effect over the stock cast on pulley • These pulleys are lighter and stronger than stock
INSTRUMENT • Less weight translates to reduced flywheel effect and quicker revs
• The race pulley is 2 lbs. (not a typo) lighter than the stock
& LIGHTING • Special Order Only
2.875 Ib. unit for extremely quick revving
ELECTRICAL/ • Hard anodized for wear resistance and corrosion protection Description P/N Retail
IGNITION • Special Order Only 85-06 Big Twin Models (exc. 06 Dyna) 29 Tooth 41-0842 $169.00
VALVE Description P/N Retail 85-06 Big Twin Models (exc. 06 Dyna) 30 Tooth 41-0843 169.00
TRAIN 85-06 Big Twin Models (exc. 06 Dyna) 29 Tooth 41-0837 $180.00 85-06 Big Twin Models (exc. 06 Dyna) 31 Tooth 41-0844 169.00
85-06 Big Twin Models (exc. 06 Dyna) 30 Tooth 41-0838 180.00 85-06 Big Twin Models (exc. 06 Dyna) 32 Tooth 41-0845 169.00
ENGINE 85-06 Big Twin Models (exc. 06 Dyna) 31 Tooth 41-0839 180.00 91-05 Sportster; Buell Models 26 Tooth 41-0888 180.00
85-06 Big Twin Models (exc. 06 Dyna) 32 Tooth 41-0840 180.00 91-05 Sportster; Buell Models 28 Tooth 41-0889 180.00
PRIMARY
DRIVE 85-06 Big Twin Models (exc. 06 Dyna) 33 Tooth 41-0841 180.00
91-05 Sportster; Buell Models 26 Tooth 41-0887 180.00
TRANNY BAKER™
FINAL
OFFSET SPROCKET .900”
• 24 tooth
DRIVE
• Provides required clearance for fat tire
GASKETS & (180mm) applications
HARDWARE • Designed for use with a 530 chain
SECURITY • No inner primary modifications required
& COVERS • Some rear fender modification may
TRAILERS be required
& RAMPS • Fits 94-06 offset sprocket (exc. 06 Dyna)
41-0807 $159.00
CHEMICAL
TOOLS &
SUPPLIES
GENERAL
ACCESSORIES
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
BAKER ™
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
BAKER 5-SPEED
™
BAKER™
FUEL & AIR
SMOOTH SHIFT KIT ROLLER 5-SPEED SHIFT KIT
• Improves the shift smoothness and the • The design principles that made BAKER™ CONTROL &
ability to find neutral
• Kit includes a Baker™ 5-speed drum with
Baker™ 6-speed overdrive shift so
smooth were applied to create a shift
5-SPEED SHIFTER FORKS HANDLEBARS
• Billet steel, hard chrome-plated
optimized fork pin groove geometries, drum/pillow block kit that will bolt CABLES
• O.E.M. replacement (exc. 06 Dyna)
billet detent plate and low effort spring onto any 5-speed and give super • 3 times thicker than stock
• Detent plate is bolted on with a machine smooth and precise shifting FOOT
• Includes all 3 forks CONTROLS
• Fits 91-03 XL, Buell models • Pillow blocks are machined from 41-0809 $167.00
• Special Order Only 6061-T6 extrusion stock for a significant TIRES &
41-0886 $279.00 increase in strength over stock WHEELS
Application P/N Retail FRAMES &
80-87 All H-D Models 41-0847 1 $265.00 FENDERS
88-97 All H-D Models 41-0801 265.00 TANKS &
98-00 All H-D Models OIL SYSTEMS
(exc. Twin Cam 88B™) 41-0802 265.00
1
Special Order Only SUSPENSION
HEADGEAR
RIDING
BAKER™ TRANSMISSION BAKER™ INNER RACE BAKER™ TRANSMISSION APPAREL
DIPSTICK SERVICE KIT PULLEY LOCKING TOOL CASUAL
• Made of billet aluminum and show • The pulley locking tool is clamped to APPAREL
• Kit is required for removing and installing
chrome-plated the inner primary bearing race the pulley and prevents pulley rotation DISPLAY &
• Largest radius possible between the while torquing the 1-7/8” pulley nut PROMO
stalk and the head • The inner race must be removed to slide
• Radius stiffens the dipstick and the gear set out of the case to the proper factory specifications CROSS
increases its natural frequency • Services left and right side drives 5- and • Anodized candy apple red (not shown) REFERENCE
• Fits 87-06 Big Twin 6-speeds • Works on 29-34 tooth pulleys
41-0808 $21.00 41-0833 $225.00 41-0834 $140.00 799
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
JIMS ®
BAGGER
WINDSHIELDS 46-1195
SEATS &
LUGGAGE
EXHAUST
CABLES
FOOT
CONTROLS
TIRES &
WHEELS
FRAMES &
FENDERS
TANKS &
OIL SYSTEMS
JIMS®
SUSPENSION FAT GEAR™ 5 OVERDRIVE
COMPLETE TRANSMISSIONS
BRAKE • 2.91 1st gear ratio
• 18%-53% increase in gear width
INSTRUMENT
& LIGHTING • Shift Ring Technology with 100% tooth to tooth contact
• Features chromed billet covers and chrome 7075T trap door
ELECTRICAL/ • Fat Gear™ complete transmissions are shipped as a complete
IGNITION assembly in a case. Transmissions do not include a pulley
VALVE • Fits Evolution and Twin Cam models
TRAIN • Special Order Only
Please allow 2-4 weeks for delivery
ENGINE
Note: Fat Gear™ transmissions incorporate a unique trap door
PRIMARY and side cover design that extends exactly .870” from a stock
DRIVE side cover. For this reason, certain modifications to the exhaust
bracket and oil filler spout may be necessary. The Fat Gear™
TRANNY transmissions are considered custom application only.
FINAL Application Silver Retail Black Retail Polished Retail
DRIVE 00-06 Softail Models 46-1194 $3448.45 46-1195 $3448.45
GASKETS &
90-99 Softail Models 46-1197 3113.85 46-1198 3113.85 46-1199 $3299.75
HARDWARE
SECURITY
& COVERS
TRAILERS
& RAMPS
CHEMICAL
TOOLS &
SUPPLIES JIMS®
GENERAL FAT GEAR™ 5 OVERDRIVE SUPERKITS
ACCESSORIES • Fat Gear super kits are shipped as a gear cluster installed
™
46-1208
into a trap door
HEADGEAR • All necessary shifting components and gaskets are supplied to
be installed into an existing transmission case.
RIDING
• Special Order Only
APPAREL
Please allow 2-4 weeks for delivery
CASUAL Note: The Fat Gear™ transmissions are considered custom
APPAREL application only. Modifications to the exhaust bracket and oil
DISPLAY & filler spout may be necessary.
PROMO Application P/N Retail
CROSS 90-00 FLH; 90-99 FXST, FXR; 91-00 FXD Models 46-1208 $2838.55
REFERENCE 00-06 FXST; 02-06 FLH Models 46-1210 2858.60
01-05 FXD Models 46-1211 2838.55
800
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
JIMS ®
BAGGER
46-1165
46-1166 WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
CONTROL &
HANDLEBARS
CABLES
FOOT
CONTROLS
JIMS® TIRES &
WHEELS
5-SPEED CLEAN-CUT TRANSMISSIONS
• Features chromed billet covers, chrome 7075T trap door and FRAMES &
shipped complete with bottled transmission oil and instructions FENDERS
• Special Order Only TANKS &
Please allow 2-4 weeks for delivery OIL SYSTEMS
NOTE: Softail and FXR single cam transmissions can be used in
SUSPENSION
any year, single cam only.
Application Plain Retail Black Retail Polished Retail BRAKE
3.21 1st Stock Ratio
90-99 Softail Models 46-1167 $2278.00 INSTRUMENT
90-94, 99 FXR Models 46-11681 $2494.85 & LIGHTING
2.94 1st Close Ratio ELECTRICAL/
90-99 Softail Models 46-1165 $2278.00 46-1169 $2353.80 IGNITION
90-94, 99 FXR Models 46-11661 2283.75 VALVE
1
Delkron® case TRAIN
ENGINE
PRIMARY
46-1158 DRIVE
46-1162
TRANNY
FINAL
DRIVE
GASKETS &
HARDWARE
SECURITY
& COVERS
TRAILERS
46-1161 & RAMPS
JIMS® CHEMICAL
6-SPEED CLEAN-CUT TRANSMISSIONS TOOLS &
• Features chromed billet covers, chrome 7075T trap door and shipped complete with SUPPLIES
bottled transmission oil and instructions GENERAL
• All gears are standard width for performance and strength, with first gear being ACCESSORIES
close ratio 2.94 and the last 4 being the same ratio as a stock 5-Speed. 6th gear
goes to .86:01 overdrive HEADGEAR
• Special Order Only
Please allow 2-4 weeks for delivery RIDING
APPAREL
Application Plain Retail Black Retail Polished Retail
2.94 1st Close Ratio CASUAL
APPAREL
90-99 Softail Models 46-1160 $2745.60 46-1162 $2952.95 46-1158 $3117.40
00-06 Softail Models 46-11742 3351.15 46-11752 3363.75 DISPLAY &
90-94, 99 FXR Models 46-11611 2745.60 46-1159 1
2974.40 PROMO
1
TP Engineering case CROSS
2
Harley-Davidson® case REFERENCE
801
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
JIMS ®
BAGGER
WINDSHIELDS
JIMS®
SEATS & 46-1164
LUGGAGE 6-SPEED SUPER KIT
WITH CLEAN CUT GEARS
EXHAUST • Made of aerospace quality steel and precision machining
• Designed to work with 98-99 style transmission top
FUEL & AIR covers only
• Kits are carefully assembled and ready to slip into your
CONTROL & transmission case without removing it from the motorcycle
HANDLEBARS
• Detailed instructions included
CABLES • Special Order Only
Please allow 2-4 weeks for delivery
FOOT Application P/N Retail
CONTROLS 90-99 All Big Twin; 99-00 FLHT, FXD 46-1163 $2285.90
TIRES & 00-06 Softail; 01-06 FLHT; 01-05 FXD 46-1164 2365.40
WHEELS
FRAMES &
FENDERS 46-1186
TANKS & JIMS®
OIL SYSTEMS RSD (RIGHT SIDE DRIVE)
SUSPENSION 6-SPEED TRANSMISSIONS
• 2.94 1st Close Ratio
BRAKE • All covers are CNC machined billet aluminum, then polished
and chrome-plated
INSTRUMENT • Accepts either hydraulic or cable clutch actuation
& LIGHTING • Drop-in for most major manufacturer’s right side drive frames.
ELECTRICAL/ No frame modifications are required
IGNITION • Special Order Only
VALVE Please allow 2-4 weeks for delivery
TRAIN NOTE: RSD transmission positions the pulley (maindrive gear) in
the current industry standard RSD pulley location. For this reason,
ENGINE RSD transmission will bolt into most RSD specific frames. If this 46-1183
transmission is used in any application other than a RSD frame,
PRIMARY custom modifications will be necessary.
DRIVE
Pulley
TRANNY Application Cover Black Retail Silver Retail Polished Retail
Evolution Models
FINAL 90-99 Softail Models Mechanical 46-1180 $3764.50 46-1181 $3764.50 46-1182 $3950.40
DRIVE
90-99 Softail Models Hydraulic 46-1183 3764.50 46-1184 3764.50 46-1185 3950.40
GASKETS & Twin Cam Models
HARDWARE 00-06 Softail Models Mechanical 46-1186 $4080.55 46-1187 $4080.55
SECURITY 00-06 Softail Models Hydraulic 46-1188 4080.55 46-1189 4080.55
& COVERS
TRAILERS
& RAMPS
CHEMICAL
JIMS® CLEAN-CUT TRANSMISSIONS
TOOLS & 5 & 6-SPEED OVERDRIVE FOR 4-SPEED FRAME
SUPPLIES • Transmissions are shipped fully loaded with the finest components available
GENERAL by JIMS® such as: forged gears with lead-in ramping and back-cut
ACCESSORIES engagement dogs, close ratio 1st gear, precision machined and
heat-treated counter and main shafts, chrome billet trap doors, chrome
HEADGEAR 46-1172
billet top and side covers and JIMS® performance gaskets
RIDING • Fits 70-E84 FL, FX models
APPAREL • Special Order Only
CASUAL Please allow 2-4 weeks for delivery
APPAREL NOTE: Conversion transmissions are designed to fit most 1970 to early 1984
Shovelhead models. They are not considered a “drop-in” product.
DISPLAY & Must be installed by qualified mechanic
PROMO
Description Plain Retail Polished Retail
CROSS 6-Speed for 4-Speed Frame 46-1172 $3153.45 46-1173 $3270.60
REFERENCE 5-Speed for 4-Speed Frame 46-1170 2508.90 46-1171 2580.75
46-1170
802
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
S&S ®
BAGGER
49-7205
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
CONTROL &
HANDLEBARS
CABLES
S&S® FOOT
6-SPEED TRANSMISSIONS S&S® CONTROLS
• Designed to handle the power of “Big Inch” motors
• All helical gears for quiet operation GEAR SET CASSETTE ASSEMBLY TIRES &
WHEELS
• 7°, low inertia, high aperture ratio shifting rings and roller shift • Internal transmission gear ratios: 1st 3.882, 2nd 2.656,
detent for smooth positive shifting 3rd 1.941, 4th 1.475, 5th 1.179 and 6th 1 FRAMES &
• 1:1 final ratio. Supplied with an ultra light 34-tooth front pulley • Overall transmission ratios: 1st 11.51, 2nd 7.875, 3rd 5.755, FENDERS
for the optimum final drive ratio with stock rear pulley. Same as 4th 4.374, 5th 3.494 and 6th 2.965 TANKS &
most overdrive 6-speeds. Pulley is 30% lighter than stock • Only available for installation in stock Harley-Davidson® or OIL SYSTEMS
• Available as complete transmission assembly with S&S® aftermarket transmission cases - minor clearancing operation
transmission cases in natural aluminum, black wrinkle required, not for 01-later Dyna models SUSPENSION
Application P/N Retail
powder-coated and polished finish
91-99 Softail; 99-05 Dyna Models 49-3476 $2261.50 BRAKE
• Complete transmission fits 91-99 Softail models 00-06 Softail; 91-06 FLT Models 49-72061 2261.50
• Retrofittable to 86-90 models 1
FL requires spacer INSTRUMENT
• Special Order Only & LIGHTING
Description P/N Retail
ELECTRICAL/
Natural Finish 49-7203 $2495.00 49-9672 IGNITION
Black Powder-Coated Finish 49-7204 2685.83
Polished Finish 49-7205 2841.08 VALVE
TRAIN
ENGINE
PRIMARY
DRIVE
TRANNY
S&S®
5-SPEED TRANSMISSION CASE FINAL
DRIVE
• Made from 356-T6 aluminum alloy
• Machined with state-of-the-art CNC equipment GASKETS &
• Fits 86-99 Softail models HARDWARE
Description P/N Retail SECURITY
Natural 49-9672 $434.99 & COVERS
Black 49-6604 538.15
TRAILERS
& RAMPS
CHEMICAL
TOOLS &
SUPPLIES
GENERAL
ACCESSORIES
TWIN POWER ™
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
OIL PANS, PLATES & PULLEYS
BAGGER
WINDSHIELDS
SUSPENSION each other in the front of the pan. Plus 1 pan has the feed
located in the rear and the return in the front for more complete OFFSET 5-SPEED TRANSMISSION
system circulation
BRAKE • Multiple integral aluminum baffles eliminate the stock plastic MOUNTING PLATES
baffle • CNC stamped and precision machined quality steel
INSTRUMENT • Necessary to align engine and transmission for custom offset frames
& LIGHTING • 1-piece cast (black or silver finishes) or
• Fits 5-speed transmissions only 85-99 Softail frames
2-piece billet (polished or premium show chrome) Description P/N Retail
ELECTRICAL/
IGNITION • Special Order Only 1/4” Replacement Trans Plate for #49-9485 & 49-9486 21-7710 $36.95
Application Year Black Retail Silver Retail 1/2” Replacement Trans Plate for #49-9487 21-7711 41.45
VALVE 1-Piece
TRAIN 3/4” Replacement Trans Plate Custom Applications 21-7712 45.45
FLH 93-98 41-0982 $499.00 41-0983 $499.00 1” Replacement Trans Plate for #49-9496 21-7713 57.95
ENGINE FLH 99-08 41-0985 499.00 41-0984 499.00
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
TRANSMISSION COVERS
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
49-7274 EXHAUST
49-6964
49-7272 FUEL & AIR
CONTROL &
KURYAKYN® 49-6964
HANDLEBARS
TRANSMISSION SHROUD CABLES
• The quick and easy way to chrome that transmission door
Note: #49-4108 will fit 2009 Touring models with Kuryakyn® and Vance & Hines True FOOT
Dual Head Pipes where the rear head pipe is routed in the same manner as the stock rear CONTROLS
head pipe. #49-4107 will fit Touring models if equipped with aftermarket True Dual Head
Pipes where the rear head pipe exits over the top of the transmission to the left side of TIRES &
the bike. WHEELS
Application P/N Retail FRAMES &
91-99 Softail Models (Mfg/N 8198) 49-7272 $62.99 FENDERS
00-06 Softail Models (Mfg/N 8205) 49-72741 69.99 TANKS &
06-09 Dyna Models (Mfg/N 7837) 49-6854 139.99 49-6963 OIL SYSTEMS
07-09 Softail Models (Mfg/N 7878) 49-6964 93.99
07-08 Touring Models (Mfg/N 7876) 49-6963 169.99 SUSPENSION
07-08 Electra Glide, Road Glide, Street Glide,
Road King with True Dual Head Pipes (Mfg/N 7877) 49-4107 169.99 BRAKE
2009 Electra Glide, Road Glide, Street Glide,
Road King (Mfg/N 8654) 49-4108 119.99 INSTRUMENT
1
Does not fit models with hydraulic clutch 49-6854 & LIGHTING
ELECTRICAL/
IGNITION
VALVE
TRAIN
ENGINE
PRIMARY
DRIVE
TRANNY
FINAL
DRIVE
GASKETS &
HARDWARE
SECURITY
& COVERS
49-6955 TRAILERS
& RAMPS
CHEMICAL
KURYAKYN ®
TOOLS &
OIL LINE COVER & TRANSMISSION SHROUD SUPPLIES
• Chrome-plated GENERAL
• Allows for a nice clean look ACCESSORIES
Application P/N Retail
HEADGEAR
99-05 Dyna (Mfg/N 8208) 49-7866 $59.99
99-01 Road King; 00-01 Dresser (Mfg/N 8209) 49-7827 69.99 RIDING
02-06 Road King, Dresser (Mfg/N 8201) 49-78651 93.99 APPAREL
1
Does not fit with SE Hydraulic Clutch 49-6984
CASUAL
APPAREL
KURYAKYN OIL LINE NACELLE
®
DISPLAY &
• Die-cast chrome cover hides the wrinkle black or plain cast PROMO
surface between the cam cover and transmission
Application P/N Retail CROSS
REFERENCE
00-06 Softail (Mfg/N8204) 49-6955 $62.99
07-08 Softail (Mfg/N8395) 49-6984 72.99 805
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
TRANSMISSION COVERS
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
KURYAKYN®
FUEL & AIR REAR CYLINDER BASE COVER
CONTROL &
• This inexpensive, chrome-plated cover cleans up the KURYAKYN®
"black hole" behind the rear cylinder
HANDLEBARS
Application P/N Retail
OIL FILLER SPOUT COVER
• Chrome-plated die-cast construction
CABLES 02-06 Electra Glide, Road Glide,
• Easy installation
Street Glide, Road King (Mfg/N 8274) 49-43791 $39.99
FOOT • (Mfg/N 8264)
07-09 Electra Glide, Road Glide, Street Glide,
CONTROLS • Fits 93-06 Electra Glide, Road Glide, Street Glide, Tour Glide,
Road King (Mfg/N 8394) with Kuryakyn® transmission
Road King (exc. Screamin’ Eagle models with 103” engine)
TIRES & Shroud 49-6963 (Mfg/N 7876) or 49-4107 (Mfg/N 7877) 49-69672 49.99
WHEELS Note: Compatible with H-D engine-transmission interface covers
1
Can be used with other H-D covers with minor modifications
(H-D# 66503-00, 66503-03, 66096-02).
FRAMES &
2
Requires Kuryakyn® Transmission Shroud for installation
49-4354 $59.99
FENDERS
TANKS &
OIL SYSTEMS
SUSPENSION
BRAKE
INSTRUMENT
& LIGHTING
ELECTRICAL/
IGNITION
VALVE
TRAIN
ENGINE
PRIMARY
DRIVE
BIKER’S CHOICE® 49-3479
TRANNY
TRANSMISSION SIDE COVER
FINAL • Chrome-plated
DRIVE • Fits 00-06 Softail; 99-06 FLT
GASKETS & 49-0567 H-D#37105-99 $50.95
HARDWARE
SECURITY
& COVERS
TRAILERS
& RAMPS 49-3480
CHEMICAL
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
CHEMICAL
TOOLS &
SUPPLIES
GENERAL
ACCESSORIES
HEADGEAR
• This highly polished cover comes ADAPTERS • Fits 00-06 FLSTC, FLSTF; 05-06 FLSTN; DISPLAY &
PROMO
complete with gasket and mounting bolts • Adapts universal brakelines into 00-02 FLSTS; 05-06 FLSTSC;
• Fits all 5 or 6-speed Big Twin transmissions hydraulic clutch lines 02-04 FXD; 96-04 FXDL; 00-05 FXDX; CROSS
Note: Rivera Engineering recommends 9/16” • Use with H-D hydraulic clutch system 02-05 FXDXT; 87-94 FXR; 00-06 FXST, REFERENCE
handlebar master cylinder. • Fits Big Twin models FXSTS
06-0210 $260.95 03-0978 $13.50 03-0999 $62.95
807
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
SPEEDO PICK-UPS & DIPSTICKS
BAGGER
49-8614
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
HEADGEAR
BAKER™ BIKER’S CHOICE®
RIDING TRANSMISSION DIPSTICK
APPAREL • Made of billet aluminum and show
CLUTCH RELEASE LEVERS
• Chrome-plated
chrome-plated Application P/N Retail
CASUAL
APPAREL • Largest radius possible between the
GARDNER-WESTCOTT 65-78 FL, FLH with Foot Clutch
DISPLAY & stalk and the head OIL PLUG & DIPSTICK H-D#37052-65 49-2650 $28.95
PROMO • Radius stiffens the dipstick and • Custom allen socket head transmission 68-E79 Big Twin
increases its natural frequency oil fill plug and fluid dipstick with O-ring H-D#37053-68 49-2424 19.95
CROSS • Fits 87-06 Big Twin (exc. 06 Dyna) • Fits 87-06 Big Twin (exc. 06 Dyna) 80-86 5-Speed
REFERENCE 41-0808 $21.00 04-1652 H-D#37075-87 $15.49 H-D#37063-90T 49-3309 30.95
808
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
TORQUE ARMS & HARDWARE
Tapered BAGGER
Allen
WINDSHIELDS
Acorn
SEATS &
LUGGAGE
EXHAUST
Allen
Allen FUEL & AIR
CONTROL &
HANDLEBARS
TRANSMISSION TOP COVER TRANSMISSION END COVER TRANSMISSION MOUNT CABLES
CUSTOM HARDWARE CUSTOM HARDWARE CUSTOM HARDWARE KITS
Application P/N Retail Application P/N Retail • Acorn FOOT
Allen • Fits 36-86 4-Speed Big Twin (mounting CONTROLS
Allen
88-97 5-Speed Big Twin 36-84 4-Speed Big Twin 04-1611 $9.49 plate to frame) TIRES &
(exc. FXD, 99-03 FLT) 04-1088 $5.95 87-05 5-Speed Big Twin 04-1531 15.49 04-4179 $21.99 WHEELS
Tapered Allen Acorn FRAMES &
65-78 4-Speed Big Twin 04-1626 $22.49 36-84 4-Speed Big Twin 04-4106 $22.99 FENDERS
36-84 4-Speed Big Twin TANKS &
(Extra Deep Threads) 04-4277 23.99 OIL SYSTEMS
07-09 Softail 04-1756 69.75
07-09 Dyna 04-1757 61.59 SUSPENSION
07-09 FLT 04-1758 70.49
04-1650 BRAKE
INSTRUMENT
& LIGHTING
TRANSMISSION ELECTRICAL/
IGNITION
FILLER PLUGS VALVE
Application P/N Retail
TRAIN
Domed Hex TRANSMISSION MOUNT
• Self-tapping type HARDWARE KIT ENGINE
40-84 Big Twin 4-Speed • Kit includes 5 studs, 5 washers and 5 nuts
(7/8” x 18) H-D#701 04-4130 $13.99 • Fits 87-99 Softail models PRIMARY
Button Head DRIVE
41-0145 $14.95
36-86 Big Twin 4-Speed
H-D#37072-79 04-1650 $13.99 TRANSMISSION TOP TRANNY
COVER SCREW SET FINAL
• O.E.M. replacement style DRIVE
• Chrome-plated GASKETS &
• Fits 56-64 Big Twin models HARDWARE
04-4225 $20.99
60-9511 SECURITY
& COVERS
TRAILERS
& RAMPS
CHEMICAL
60-3008 TOOLS &
60-9513 SUPPLIES
60-3002
GENERAL
ACCESSORIES
HEADGEAR
CARLINI TORQUE ARM
™
TWIN POWER ™
RIDING
• The Torque Arm eliminates dangerous flexing, by attaching the 5-SPEED TRANSMISSION SNAP RINGS APPAREL
engine to the transmission • Sold in packs of 10 CASUAL
• Made of triple chrome-plated billet aluminum with all mounting Application P/N Retail APPAREL
hardware included 80-93 Big Twin End Housing Bearing
• Made in USA DISPLAY &
H-D#11020 60-3002 $4.85 PROMO
Description P/N Retail L84-06 Big Twin 5-Speed (exc. 06 Dyna)
84-94 FXR Models 60-9511 $397.95 CROSS
H-D#11161 60-3008 21.34 REFERENCE
84-99 Softail Models 60-9513 397.95
809
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
HARDWARE
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST 5-SPEED
TRANSMISSION SEAL
FUEL & AIR GARDNER-WESTCOTT • Fits L95-06 Big Twin (exc. 06 Dyna)
CONTROL & TRANSMISSION TOP • Sold individually
04-6375 H-D#12067A $6.37
HANDLEBARS BREATHER FITTING
CABLES • Chrome-plated
• Fitting used for transmission breathing
FOOT • Sold in packs of 10
CONTROLS • 1/8”-27 NPT x 1/4” hose
TIRES & 04-1185 H-D#62375-57 $60.50
WHEELS
FRAMES & BIKER’S CHOICE®
FENDERS HEAVY-DUTY
TANKS & GARDNER-WESTCOTT TRANSMISSION ADJUSTER
OIL SYSTEMS
JAM NYLOCK • Chrome-plated
• Used in 5-speed transmissions • Fits 37-86 Big Twin with open or
SUSPENSION
• 3/4”-16 Jam Locknut tin primary
04-1704 H-D#35078-79 $1.95 49-2893 H-D#34735-36 $33.95
BRAKE
INSTRUMENT
& LIGHTING TRANSMISSION REBUILD KIT
ELECTRICAL/
IGNITION
VALVE
TRAIN
ENGINE
PRIMARY
DRIVE
CHEMICAL
TRANSMISSION BEARINGS
TOOLS &
SUPPLIES
GENERAL 5-SPEED TRANSMISSION BEARINGS
ACCESSORIES Application P/N Retail
Mainshaft
HEADGEAR Note: 2 of #60-1457 are required to service 1 transmission.
60-1457 80-E84 Big Twin H-D#8978 60-1451 $9.95
RIDING
APPAREL 80-99 Big Twin (Right) H-D#8998 60-1452 4.45
80-90 Big Twin 5th Gear H-D#8904 60-1457 9.25
CASUAL 80-06 Big Twin (exc. 06 Dyna) H-D#8876A 21-6610 12.95
APPAREL 90-06 Big Twin (exc. 06 Dyna) H-D#35051-89 60-1461 12.29
DISPLAY & 91-06 Sportster; L84-06 (exc. 06 Dyna) Big Twin H-D#8996A 60-2208 11.75
PROMO 60-2208 Countershaft
CROSS 80-06 Big Twin (exc. 06 Dyna) Left H-D#8977 60-1456 $15.75
REFERENCE 80-98 Big Twin Right H-D#8998 60-1452 4.45
60-1452 80-06 Big Twin (exc. 06 Dyna) H-D#8876A 21-6610 12.95
810 21-6610
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
INNER RACE & GEAR SPACER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
SUSPENSION
MAINSHAFT MAINSHAFT (4-SPEED) MAIN DRIVE
(SPORTSTER) Application
Bearing
P/N Retail GEAR ASSEMBLY BRAKE
Application P/N Retail Application P/N Retail
Bearing 37-86 Big Twin (Right) Drive Gear Seals INSTRUMENT
52-90 K, Sportster (Left) H-D#9020 60-2206 $6.75 • Sold in packs of 10 & LIGHTING
H-D#9025A 60-1453 $8.40 L66-E81 Big Twin ELECTRICAL/
H-D#12022 49-2486 $11.95 IGNITION
Woodruff Keys VALVE
• Sold in packs of 10 TRAIN
37-E77 Big Twin Drive Gear
H-D#35175-38 60-3114 $9.97 ENGINE
PRIMARY
5-SPEED TRANSMISSION PARTS DRIVE
• Made of the finest quality material and precision machined TRANNY
• O.E.M. type replacement parts
Application P/N Retail Application P/N Retail Application P/N Retail FINAL
Bearing 1st Gear Mainshaft 4th Gear Countershaft DRIVE
• 4 used 80-06 Big Twin (exc. 2006 Dyna) 80-95 Big Twin GASKETS &
80-06 Big Twin (exc. 2006 Dyna) H-D#35025-79B 41-1103 $65.45 H-D#35625-79B 41-1109 $60.45 HARDWARE
H-D#8876A 21-6610 $12.95 1st Gear Countershaft 5th Gear Mainshaft SECURITY
Spacer, Countershaft 80-06 Big Twin (exc. 2006 Dyna) 85-90 Big Twin & COVERS
80-06 Big Twin (exc. 2006 Dyna) H-D#35622-79C 41-1108 $89.95 H-D#35029-85A 49-6214 $223.10 TRAILERS
H-D#35629-79 (ea.) 60-9061 $3.39 4th Gear Mainshaft Countershaft & RAMPS
Mainshaft Bearing Note: 95 & up must use mating gear. 80-06 Big Twin H-D#35632-79 41-1102 $78.95
80-90 Big Twin 5th Gear 80-95 Big Twin CHEMICAL
H-D#8904 60-1457 $9.25 H-D#35028-79B 41-1106 $56.95
TOOLS &
90-05 Big Twin H-D#35051-89 60-1461 12.29
SUPPLIES
Race Mainshaft
80-06 Big Twin H-D#34091-85 21-6608 $22.95 GENERAL
ACCESSORIES
HEADGEAR
RIDING
APPAREL
CASUAL
APPAREL
DISPLAY &
PROMO
CROSS
REFERENCE
811
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
SHIFTER PARTS
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
EXHAUST
SUSPENSION
BRAKE
INSTRUMENT
& LIGHTING
BAKER™ 5-SPEED BAKER™
ELECTRICAL/
IGNITION SMOOTH SHIFT KIT ANTI-OVERSHIFT RATCHET PAWL
• Utilizes a rectangular cross-section spring
VALVE • Improves the shift smoothness and the ability to find neutral • Lever break for overshift protection
TRAIN • Kit includes a Baker 5-speed drum with optimized fork pin
™
• Pawl shaft lever splines are hubbed on a gear cutter for high
groove geometries, billet detent plate and low effort spring strength
ENGINE • Detent plate is bolted on with a machine
• Fits 1980-2000 models (exc. Twin Cam 88B™)
• Fits 91-03 XL and Buell models 41-0836 $85.00
PRIMARY
• Special Order Only
DRIVE
41-0886 $279.00
TRANNY
FINAL
DRIVE
GASKETS & 49-4432
HARDWARE
SECURITY
& COVERS
49-4434
TRAILERS
& RAMPS
BAKER™
5-SPEED SHIFTER FORKS ANDREWS SHIFTER FORKS
CHEMICAL • Billet steel, hard chrome-plated
Application P/N Retail
• O.E.M. replacement 36-86 4-Speed Big Twin 1-2 Countershaft
TOOLS & • 3 times thicker than stock
SUPPLIES H-D#34159-36 49-4432 $10.99
• Includes all 3 forks 36-86 4-Speed Big Twin 3-4 Mainshaft
GENERAL 41-0809 $167.00
ACCESSORIES H-D#34158-36 49-4434 10.99
HEADGEAR
RIDING
APPAREL
CASUAL
APPAREL
DISPLAY &
PROMO
BIKER’S CHOICE®
BIKER’S CHOICE ®
SHIFT CAM FOLLOWER
CROSS
REFERENCE SHIFT LEVER SHAFTS FOR SPORTSTERS • Heavy-duty steel
• Fits 77-85 Sportster • Fits L84-90 4-Speed Sportster with alternator
812 49-2798 H-D#34628-75 $28.45 21-5537 H-D#34063-84 $8.95
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
SHIFTER PARTS
BAGGER
WINDSHIELDS
21-5571 SEATS &
60-3191 60-9034 LUGGAGE
49-2888 21-5575 EXHAUST
60-9033 05-5329
21-5576 FUEL & AIR
SHIFTER PARTS CONTROL &
Application P/N Retail HANDLEBARS
Retaining Rings
60-3299 • Sold in packs of 10 CABLES
49-2682 80-06 5-Speed Big Twin Shifter Rod Retaining Ring (exc. 2006 Dyna)
H-D#11150 21-5571 $3.20 FOOT
SHIFTER SHAFT PARTS Lock Tabs
CONTROLS
Application P/N Retail • Sold in packs of 10 TIRES &
Forks 55-90 Sportster Shifter Cam Bolt H-D#34069-71 05-5329 $8.15 WHEELS
• Heat-treated alloy steel Shift Lever Springs FRAMES &
52-90 K, Sportster STD. H-D#34291-52C 49-2888 $20.45 • O.E.M. replacement FENDERS
Fork Shims • Sold in packs of 5 TANKS &
• Sold in packs of 10 80-00 5-Speed Big Twin H-D#34087-79A 21-5575 $16.39 OIL SYSTEMS
.007” H-D#6750 60-3191 $6.50 80-99 5-Speed Big Twin H-D#34083-79 21-5576 18.04
.014” H-D#6752 60-3192 6.50 SUSPENSION
Finger Rollers
• Sold individually BRAKE
52-90 K, Sportster; L79-86 4-Speed Big Twin H-D#34168-52 60-9033 $1.36
40-E79 Big Twin H-D#34168-39 60-9034 1.36 INSTRUMENT
Lock Tabs 59-9052 & LIGHTING
• Sold in packs of 10 ELECTRICAL/
35-86 Big Twin Shifter Fork Nut H-D#34180-33 49-2682 $5.95 21-5616 IGNITION
Shifter Arm Adjuster Screw VALVE
• Sold individually TRAIN
80-Up Big Twin H-D#33119-79B 60-3299 $6.50 O.E.M. STYLE
ENGINE
SHIFT LEVER SHAFT
• Chrome-plated PRIMARY
Application P/N Retail DRIVE
70-84 4-Speed FL; 84-E85 FXST; E85 FXWG
H-D#33660-74A 59-9052 $46.95 TRANNY
87-06 FLST H-D#33668-90B 21-5616 21.45
FINAL
DRIVE
GASKETS &
HARDWARE
SECURITY
& COVERS
TRAILERS
& RAMPS
60-1458
CHEMICAL
60-1459
TOOLS &
SUPPLIES
BIKER’S CHOICE® SHIFTER CAM BEARINGS SHIFTER SHAFT BUSHINGS GENERAL
SHIFT LEVER COVER Application P/N Retail • Fits 74-85 FX (exc. FXWG) ACCESSORIES
• Chrome-plated 80-00 FLT, FXR 5-Speed 49-5999 H-D#60593-74 $6.50
Right Hand H-D#9114 60-1458 $6.45 HEADGEAR
• Fits 87-99 FLST
21-5617 H-D#33642-89 $12.95 80-00 FLT, FXR 5-Speed
RIDING
Left Hand H-D#9115 60-1459 4.95 APPAREL
CASUAL
APPAREL
DISPLAY &
PROMO
CROSS
REFERENCE
813
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY
TRANNY
SHIFT PARTS & LEVERS
49-0643 21-5523
BAGGER
WINDSHIELDS 49-0817
SEATS &
LUGGAGE 60-3526
EXHAUST 49-0820
CABLES
49-0816
FOOT
CONTROLS
BIKER’S CHOICE® SHIFT LEVERS
TIRES & • Chrome-plated
ARLEN NESS
WHEELS Application O.E.M. P/N Retail
SHIFT LEVER
• Constructed from rugged 6061-T6 billet
FRAMES & 86-90 Sportster Models 34605-86TB 49-0820 $18.50 aluminum
FENDERS 91-03 Sportster Models 34606-90T, 34615-94 49-0643 19.50 • Show quality chrome finish
TANKS & 65-84 FL (Heel/Toe Style) 34692-74TA 60-3526 35.95 • FLT models require spacer, sold
OIL SYSTEMS 74-86 FX 34564-74TA 49-0816 20.95 separately
82-94 FXR 34599-81T 49-0817 18.95 • Designed to work on FXR, Softail, FLT
SUSPENSION 81-86 FXWG; 84-85 FXST 33664-81T 49-0815 18.50 and Dyna models
83-07 FLHT; 86-07 FLST (Toe Shifter) 33895-82A 21-5524 28.45 Description P/N Retail
BRAKE 83-06 FLHT 86-06 FLST (Heel Shifter) 33640-83 21-5523 28.45 Shift Lever 26-3122 $129.95
Spacer for FLT Models 26-3123 14.95
INSTRUMENT
& LIGHTING
ELECTRICAL/
IGNITION
VALVE
TRAIN
ENGINE
KURYAKYN®
PRIMARY EXTENDED GIRDER
DRIVE KURYAKYN® SHIFT LEVER
TRANNY GIRDER SHIFT LEVER • 8” length, about 1-3/4” longer than a 26-1525
• The unique shape places the shift peg in stock FLT or FLST shift lever
FINAL a comfortable, easy to reach location • Works as both a front or rear
DRIVE and provides increased leverage for • Use Heel Shift Eliminator if removing
GASKETS & easier, more precise shifts rear shift lever altogether
HARDWARE • The styling blends well with other • Sold individually
SECURITY Kuryakyn® parts • Shift peg sold separately
& COVERS • Includes cap that slides into position, • Mfg/N 1026
covering end of the ugly shifter spline 49-7798 $83.99
TRAILERS
& RAMPS • Mfg/N 1025 26-1527 26-1529
• Fits Softail, Dyna, FXR models 61-0729
CHEMICAL Note: Use on FLST or FLT models requires
Heel Shift Lever Eliminator NOVELLO
TOOLS &
SUPPLIES
49-7150 $79.99 HEEL/TOE SHIFTER
GENERAL ELIMINATOR
ACCESSORIES CARL MILES • #26-1525 fills the gap on the shifter
HEEL GUARD™ 49-7799 shaft when eliminating the heel shifter
HEADGEAR and moving the toe shifter to the heel
REAR SHIFT LEVER position
RIDING ELIMINATOR • #26-1527/26-1529 fills the gap when
APPAREL • Allows you to remove the heel shift removing the heel shifter
CASUAL lever on Dressers, Road Kings or any • Chrome CNC machined billet T-6
APPAREL FLST model aluminum
BIKER’S CHOICE® • Design keeps shift shaft in perfect • Held in place with set screw
DISPLAY &
PROMO SHIFTER MOUNTING alignment to avoid premature shaft wear • Made in the USA
BRACKET • Rubber lining eliminates rattles and • Fits 84-10 FLT, FLHT models
CROSS keeps your bike shifting smoothly Description P/N Retail
REFERENCE • Stock replacement for Heritage Softail Description P/N Retail Warrior 26-1525 $26.95
• Chrome 86-Up Softail 61-0729 $29.95 Top Hat 26-1527 25.95
814 21-5612 $35.95 88-Up Dresser, Road King 49-7799 29.95 Stepped 26-1529 25.95
BIKER’S CHOICE
TRANNY NEW PART NUMBERS ARE RED
TRANNY
END COVER, SHIFTER COVERS & KICKSTART KITS
BAGGER
WINDSHIELDS
SEATS &
LUGGAGE
BIKER’S CHOICE ®
EXHAUST
GEAR SHIFTER COVERS
• Duplicate of O.E.M. cover
• Hides unsightly shifter bracket and mechanism FUEL & AIR
• Stamped steel, chrome-plated
• Fits 65-84 FL CONTROL &
49-2452 H-D#33644-65 $16.95 HANDLEBARS
CABLES
BIKER’S CHOICE® FOOT
TRANSMISSION END COVER CONTROLS
• Chrome-plated TIRES &
• Fits 36-86 Big Twin WHEELS
49-0620 H-D#33276-70 $42.95
FRAMES &
FENDERS
BIKER’S CHOICE ®
TANKS &
DUST COVER/SHIFTER SHAFT LEVER OIL SYSTEMS
• Chrome-plated
• O.E.M. type replacement SUSPENSION
• Fits 52-E79 FL; 71-73 FX
49-2776 H-D#34423-87T $21.45 BRAKE
INSTRUMENT
& LIGHTING
KICKSTART (SPORTSTER & 4-SPEED) ELECTRICAL/
Application P/N Retail IGNITION
Arms VALVE
• Chrome-plated TRAIN
52-76 K, XL; L72-76 FX H-D#33057-72T 49-0612 $28.95
Pedal ENGINE
52-67 K, XLH; L29-67 FL H-D#33175-16TA 49-0610 $10.95
Pedal Rubbers PRIMARY
DRIVE
36-76 Big Twin Flat Pedal H-D#33182-63TA 49-2442 $3.95
63-86 Sportster, Big Twin H-D#33189-63T 49-2575 3.50 TRANNY
FINAL
DRIVE
GASKETS &
HARDWARE
SECURITY
& COVERS
TRAILERS
& RAMPS
BIKER’S CHOICE ®
BIKER’S CHOICE
NEW PART NUMBERS ARE RED TRANNY