Resources Used:
• Packet Server.
• Switch.
• Connecting wires.
Procedure:
Step 1:
• Construct the LAN .
Step 2:
• IP address assignment.
Step 3:
• Check the connectivity between PC0 & Server0.
Resources Used:
• Packet Server.
• Router.
• Two PCs
• Connecting wires.
Procedure:
Step 1:
• Construct a Router and two pcs.
Step 2:
• IP address assignment to the Router.
Step3:
• IP address assignment to the PC0 and PC1.
Step 4:
• Check the connectivity between PC0 &PC1.
Step 5:
Give default gateway to both PCs.
Step 6:
• PC1> Using ping command.
LAB 03
OBJECTIVE:
Configure a Linksys Wireless Network.
Resources Used:
• Three Router
• Three Switch.
• Three PCs
Procedure:
Step 1:
• Construct the LAN Network.
• Connect all PCs to all given Switches respectively using straight wire.
• Connect all Routers to all given Switches respectively using straight wire.
Step 2:
• Assign WI2T to all Routers (Router 1, 2 and 3).
Step 3:
• Assign IP address to all ports of Router (1,2 and 3) and also to all PCs.
Step 4:
• Working Area after assign IP address to all LAN network.
Step 5:
• Routing through Command Line (CLI) on all three Routers (1,2 and 3) respectively.
Step 6:
• Ping all the PCs respectively to each other.