The complete line of 3M fire protection products helps firestop applications, including plastic pipes, metal pipes,
prevent fire, smoke, toxic fumes and moisture from passing HVAC ductwork, cables, construction gaps, grease ducts,
through penetrations in fire-rated walls and floors. These wall tops and control joints.
easy-to-install products are suitable for a wide variety of
3 F ire Rated
Expansion Joints 8
5 Plastic Pipe
9 Insulated Pipe
Sealant 1000 NS
Lightweight, cementitious sealant
with excellent adhesion—bonds 3M Fire Barrier Water
to concrete, metals, wood, plastic Tight Silicone Sealant
and cable jacketing. 1000 NS is a non-slumping
silicone ideal for use on
• Easy cleanup with water
fire-rated floor and wall
• No special handling,
penetrations and joints.
routine disposal
• Thixotropic: will not sag eets the UL Water Leakage
M
or run in vertical or Test – Class 1 Requirements.
overhead applications • Excellent weatherability
• Halogen-free • Ideal for fast-track construction
• Tack free in approximately • Excellent adhesion
15 minutes • Easy application with standard or bulk caulking guns or
• Gray color pneumatic pumping equipment
• High caulk rate • Cures upon exposure to atmospheric humidity
• Low VOC • Reenterable and repairable
• Meets ASTM E136 test standard
• No wire mesh reduces safety issues 3M Fire Barrier Moldable Putty+ is designed for use as a
• Easy to install, easy to remove and reuse one-part, 100% solids intumescent firestop that restores
• No cutting and no mess—just lock pillows together, the integrity of fire-rated building construction.
compress and place (use 3M Fire Barrier Moldable
™
FB 249 Pillow 16508-5 1/8" x 4" x 8" (3,2 x 102 x 203 mm) N/A 24
MPP+ 4" x 8" 16508-5 1/8" x 4" x 8" (3,2 x 102 x 203 mm) 4 in. 3
100 each
MPP+ 7" x 7" 16509-2 1/8" x 7" x 7" (3,2 x 178 x 178 mm) 6.12 in. 3
20 each
MPP+ 9.5" x 9.5" 16510-8 1/8" x 9.5" x 9.5" (3,2 x 241,3 x 241,3 mm) 11.3 in. 3
20 each
MP+ Stix 16526-9 1.5" x 11" (40,6 x 279 mm) 21.2 in. 3
10 each
Put
in its
heat
place
4" Round
PT2RMB 2" Round Mounting Brackets (Pair) 11.0 18774-2 Pair 24
PT2.5SMB 2.5" Square Single Mounting Brackets (Pair) 11.60 18750-6 Pair 24
PT2.5TMB 2.5" Square Triple Mounting Brackets (Pair) 19.18 18751-3 Pair 24
PT4SMB 4" Square Single Mounting Brackets (Pair) 16.40 18752-0 Pair 24
PT4TMB 4" Square Triple Mounting Brackets (Pair) 29.10 18753-7 Pair 24
PT4SSMB 4" Square Sixplex Mounting Brackets (Pair) 36.00 18777-3 Pair 6
• Available for use with 2", 3", 4" and 6" 3M Fire Barrier
Barrier Cast-In Devices are installed prior to the concrete
Cast-In Device
pour (attaching directly to the wood forms) and can be
adjusted to various concrete depths.
2HA 2" Cast-In Height Adaptor for use with 2PCID and 2MCID 16548-1 12
3HA 3" Cast-In Height Adaptor for use with 2PCID and 2MCID 16549-8 12
4HA 4" Cast-In Height Adaptor for use with 2PCID and 2MCID 16550-4 12
6HA 6" Cast-In Height Adapter for use with 6PCID and 6MCID 16551-1 12
4AA 4" Aerator Adapter for use with 4PCID and 4MCID 16589-9 12
This patented
intumescent wrap/strip
has 3M state-of-the-art
through-penetration fire
protection plus improved
characteristics.
Wrap/Strip FS-195+ 07115-7 N/A 2" x 24" (50,8 x 609,6 mm) 10 each
Restricting Collar RC-1 08324-5* N/A 2" x 25' (50,8 mm x 7,62 m) 1 each
Ultra PPD 1.5 08378-5 Finger Tab 1-1/2" (38,1 mm) 10 each
Ultra PPD 2.0 08379-2 Finger Tab 2" (50,8 mm) 10 each
Ultra PPD 3.0 08380-8 Finger Tab 3" (76,2 mm) 10 each
Ultra PPD 4.0 08381-5 Finger Tab 4" (101,6 mm) 10 each
Ultra PPD 16 Fast Anchors 11530-1 Anchors 3/4" x 16" (19,05 x 406,4 mm) 400 each
Tough
insulation.
Easy
installation.
Sheet CS-195+
Sheets
Rolls
E-5A-4 Mat 16571-9 24.5" x 20.0' x 0.4" (622,3 mm x 6,10 m x 10,16 mm) 1 roll
Aluminum Tape T-49 02240-1 4" x 180' x 0.005" (101,6 mm x 54,8 m x 0,127 mm) 2 rolls
Specifications and Ordering Information for 3M Mortar, Spray and Duct Wrap
™
Firedam Spray 200 18755-1 5-gallon pail (640 fl. oz.) 1 pail