Ans: B Ans: B
4. The number of the board feet in a plank 2 9. Circular pitch times diametral pitch equals
a. π
inches thick, one foot wide and 20 feet long
b. 1/π
is c. 1.0
a. 400 d. π2
b. 20
c. 40 Ans: A
d. Power
10. a general principle in the motion of a body
Ans: C
can be stated as follows (F=force, M=mass,
5. The nearest whole number to the value of V=velocity, Δ=change, T=time)
a. FT=MV
2/3(700)2/3 is
b. FΔT=MV2
a. 312
c. FT=MΔV
b. 1,243
d. FΔV=MΔT
c. 12,433
d. 54
Ans: C
Ans: D
11. In mechanics, if mass (M), length (L), and
time (T) are selected as primary units, force
(F) will have the following equation
a. F=MLT
b. F=MT2L-1
c. F=MLT2
d. F=ML-1T2 16. The dimensions of “Acceleration x Mass” is
the same as that to
Ans: C a. Power
b. Length
12. The value of (33)2 is c. Work
a. 54 d. Weight
b. 81
c. 243 Ans: D
d. 729
17. Which one of the following contains only
Ans: D items which are considered fixed changes?
a. Interest, taxes, amortization, insurance,
13. The number of board feet in a plank 3 rent
inches thick, 1 foot wide and 20 foot length b. Amortization, insurance, steam cost,
is painting, cleaning
a. 60 c. Interest, taxes, replacements, labor for
b. 120 repairs
c. 360 d. Interest, taxes, rent, power cost, oil cost
d. 720
Ans: A
Ans: A
18. An economic study is made of the total
14. The moment the inertia of a rectangular amount cost (C) for a series of alternative
whose base is B and height H. about its base investment (P) for a given project. If C is
is plotted as the ordinate versus P, the most
a. BH3/12 desirable occurs when
b. BH2/4 a. dC/dP=1
c. BH3/3 b. dC/dP=CO
d. BH3/36 c. dC/dP=0
d. dC/dP=+1
Ans: C
Ans: C
15. In general design, stress and factor of safety
are related as follows: 19. Galvanized iron is a term referring to iron
a. Design stress=ultimate stress x factor of coated with
safety a. Aluminum
b. Factor of safety=design stress/ultimate b. Magnesium
stress c. Tin
c. Design stress=ultimate stress/factor of d. Zinc
safety
d. Ultimate stress=factor of safety/design Ans: D
stress
20. In a cantilever beam with a concentrated
Ans: C load at the free end, the moment is
a. Maximum at the wall
b. ¼ maximum half way out on the beam 28. The quantity of a certain commodity that is
c. Constant along the beam bought at a certain price at a given place
d. Maximum at the free beam and time.
21. The quantity of a certain commodity that is 29. The length of time during which the
offered for sale at a certain price at a given property may be operated at a profit.
place and time.
Ans: Supply Ans: Economic life
22. Funds supplied by others on which a fixed 30. The length of time during which it is capable
rate of interest must be paid and the debt of performing the function for which it was
be repaid at a specific time. designed.
23. A certificate of indebtedness of a 31. Products that are directly used by people to
corporation usually for a period of not less satisfy their wants.
ten years and guaranteed by a mortgage on
certain assets of the corporation or its Ans: Customer goods
subsidiaries.
32. The amount which is willing buyer will pay a
Ans: Bond willing seller for a property which each has
equal advantage and is under no
24. On negotiable paper is the difference compulsion to buy or sell.
between the present worth and the worth
of the paper at the some time in the future. Ans: Market value
Ans: Discount 33. The sum of the first cost and the present
worth of all costs of any property of
25. The analysis and evaluation of the factors replacement, operation, and maintenance
that will affect the economic success of for a long time or forever.
engineering projects to the end that a
recommendation can be made which will Ans: Present worth
ensure the best use of capital.
34. The value which is usually determined by a
Ans: Engineering economy disinterested third party in order to
establish a price that is fair to both seller
26. The decrease in the value of property due and buyer.
to the gradual extraction of its content.
Ans: Fair value
Ans: Depletion
35. The value of the variable for which the costs
27. The process of determining the value of for the alternative will be equal.
certain property for specific reasons.
Ans: Break-even point
Ans: Appraisal
36. The quantity of a certain commodity that is
brought at a given place and time.
Ans: A
Ans: Demand
41. Which of the following depreciation
37. Funds supplied and used by owners of an methods cannot have a salvage value of
enterprise in the expectation that a profit zero?
will be earned
a. Straight line method
Ans: Investment b. Sinking fund method
c. Declining balance method
d. SYD method
Ans: A
Ans: D
40. A method of depreciation whereby the
amount to recover is spread uniformly over 45. In SYD method, the sum of years digit is
the estimated life of the asset in terms of calculated using the formula with n=number
the periods or units of output. of useful years of the equipment.
a. Straight line method a. n (n-1)/2
b. Sinking fund method b. n (n+1)/2
c. Declining balance method c. n (n+1)
d. SYD method d. n (n-1)
Ans: B 52. 1 horsepower is equivalent to how many
Watts?
46. Capitalized cost of any property is equal to a. 764
the b. 476
a. annual cost c. 674
b. first cost + interest of the first cost d. 746
c. first cost + interest of perpetual
maintenance Ans: D
d. first cost + salvage value
53. 1 electron volt is equivalent to how many
Ans: C Joules?
a. 1.603 x 10-19
47. An astronomical unit is approximately equal b. 1.602 x 10-16
to c. 1.602 x 10-14
a. 100 million km d. 1.602 x 10-12
b. 125 million km
c. 150 million km Ans: A
d. 175 million km
54. Which is not equivalent to 1 atm?
Ans: C a. 1.013 x 105 PA
b. 1.013 bar
48. Absolute zero is c. 14.7 psi
a. 0°C d. 100 kg/cm2
b. 0°F
c. 0 R Ans: D
d. 0 K
Ans: D
49. The gravitational constant G is equivalent to
__________ N.m²/kg² 55. A place where the sellers and the buyers
a. 6.67 x 10-9 come together?
b. 6.67 x 10-10
c. 6.67 x 10-11 Ans: market
d. 6.67 x 10-12
59. The amount of the machine or equipment 65. An intangible value which is actually
would sell for if disposed off as junked. operating concern has due to its operation.
a. Book value
Ans: scrap value b. Fair value
c. Goodwill value
d. Going value
Ans: D
60. The international system of units.
66. The value which has a disinterested third
Ans: S.I. party, different from the buyer and seller,
will determine in order to establish a price
acceptable to both parties.
61. The intangible item of value from the a. Market value
b. Goodwill value
exclusive right of a company in a stated
c. Fair value
region of the country. d. Franchise value
a. Market value Ans: C
b. Book value
c. Goodwill value
d. Franchise value
Ans: D
Ans: C d. Principal
Ans: B c. Investment
c. πr4/24 a. ½ mr2
d. πr44 b. ¼ mr2
c. 4 a. Truss
d. 5 b. Frame