Reliable Operation
Cote-Shield circuitry allows the Z-tron III to ignore
coatings or build up on the sensing element.
There are no false signals from dust or tunneling.
Z-tron III™ Z02X-Series
Specifications Dimensions Wiring
Power requirement
120 ± 25 Vac, 50/60 Hz (std.)
230 ± 25 Vac, 50/60 Hz (optional)
15-30 Vdc (optional) LED ALARM
WHEN OUT
(1 Watt maximum)
Output TIME DELAY
DPDT relay ADJUSTMENT
SET POINT
Contact Rating ADJUSTMENT FAIL SAFE SELECTOR
Non-inductive 5A @ 120 Vac or FWD/REVERSE TIME
2A @ 230 Vac DELAY SELECTOR
Fail Safe 1 2 3 4 5 6 7 8 9
High (HLFS) or GND L1 L2 NC C NO NC C NO
Low (LLFS) field adjustable
Response Time
Approx. 0.2 sec.
Adjustable 0-60 seconds
Sensitivity
0.3 pF Model Number
Differential Technology
Worst case with horizontal sensing Z RF Admittance
element, 1/64"(.4mm) or less Reserved for future use
0
Recommended Ambient Input
Electronics Temperature 0 120Vac
-40°F to 145°F* 1 24Vdc
(-40oC to 63oC) 3 230Vac
Output
*Unit will operate above 145°F 2 Double pole Double Throw Relay
but with reduced component life. Sensing Element
Temperature Effect Application Sensing Element Pressure/Temperature Wetted Parts
± 0.5 pF/50°F(10oC) 05 General 700-0206-201 14bar@121° C 316SS
Purpose (200psi@250° F) & PEEK
Line Voltage Effect Cote-Shield™ Length
± 0.2 pF/20V 1 6 inch/152mm
A 10 inch/254mm Note:
Sensing Element Connection B 3.5 inch/88.9mm Cote-Shield should extend through Nozzle +
3/4" NPT (Optional Flange Mount) C 2 inch/51mm Typical "Wall Buildup" + 2 Inches
Sensing Element Wetted Parts Insertion Length (IL)
A 6 inch/152mm
316SS & PEEK (2)
B 12 inch/305mm
Process Pressure & Temperature C 18 inch/457mm
200 psi at 250° F D 36 inch/914mm
E 48 inch/1219mm
14 BAR at 121° C
F 60 inch/1524mm
Note: Temperature at electronics H 72 inch/1829mm
must not exceed 145° F. Z Other
Approvals
UL/CUL/508 General Purpose
CE 0344
(1) Private label/OEM optimization available. Contact your Drexelbrook representative or factory for more
Housing detailed information.
NEMA 1through 5 & 12 (2) PEEK (Polyether-Ether-Ketone) is a special, high-temperature thermoplastic similar to TFE but with
better abrasion resistance.
DREXELBROOK ®