2 www.supermec.com.sg
www.supermec.com.sg 3
GUA
CSD
GUB - A
GUBA - A
JUNCTIONGUBA
BOXES
-S
EJB - A
GUA
EJB - S
GUB - A
ECS
GUBA - A
UH - UP
GUBA - S
CSE - A
EJB - A
CSE - P
EJB - S
CSE - S
ECS
WH - WP - WA
CSDC - CSDY
UVB - UVD
OPERATOR EXD
CSE - A
CSE - P
CSE - S
OPERATOR EXE
DRAIN - VALVES
SUPER CONTROL
The equipment we introduce in this catalogue are designed to satisfy
most of our clients’ requirements to CONTROL explosion proof electrical
equipment.
All equipment are manufactured using the latest technologies, both
mechanical and electrical, using materials able to resist in most highly
corrosive environment and to ensure a modern
functionality solution and a long duration of investment.
www.supermec.com.sg 02
EJB A
EJB A series enclosures are normally used in the chemical and
petrochemical plants, off-shore platforms, refineries and any other
industry where hazardous atmospheres
(gas and combustible dust) are potentially present.
The EJB A range has been designed to meet the main requirements
of power distribution, monitoring and signaling, and other electrical
functions inside the hazardous area of the plant.
00 www.supermec.com.sg
Function
The EJB A series can be used for the following main applications:
• control station and instrument housing;
• motor starter unit;
• lighting control panel;
• electronic grounding system;
• terminal and bus-bars box;
and fitted with other electrical and or electronic equipment as per client specifications.
Construction
The materials used to manufacture the EJB A series have been studied to grant the maximum protection
against the highly corrosive agents present in these industries:
• body and cover casted of copper-free (lower 0.1%) aluminium alloy;
• external epoxy powder coating RAL 7001;
• internal anticondensation coating (upon request);
• anti-loosening bolts and earthing screws of stainless steel AISI 316;
• gasket on cover of silicone;
• window of thermoresistant glass sealed with auto-leveling silicone;
The EJB AS series, is a special execution with aluminium body and cover in stainless steel limited to sizes
EJB 55 and EJB 7. The cover in stainless steel allows the installation of large window with max visible size of
mm. 400 x 300.
Protection
certificates number: IMQ 11 ATEX 031 X - IECEx IMQ 14.0010X
marking: ` II 2GD Ex d e [ia/ib] IIB+H2 T6~T3 Gb Ex tb IIIC T85°C~T150°C Db
ambient temperature: -60°C +60°C
degree of protection: IP66
conformity: Directive ATEX 94/9/EC
standards: IEC-EN60079-0 / IEC-EN60079-1 / IEC-EN60079-7 / IEC-EN60079-11 / IEC-EN60079-31
category: suitable for Zone 1 – 21 (gas) and Zone 2 – 22 (dust)
www.supermec.com.sg 42
B b
A a
e c C
code A B C a b c d e screw kg
EJB 1 A 300 230 220 220 150 165 160 230 M10 12
EJB 3 A 390 300 280 310 220 220 250 300 M10 22
EJB 4 A 460 340 300 380 260 235 320 340 M10 30
EJB 45 A 540 380 300 460 300 235 400 380 M10 50
EJB 5 A 640 460 360 560 380 290 500 460 M10 62
EJB 55 A 720 540 390 620 440 315 540 540 M12 87
EJB 7 A 1000 700 495 880 580 365 800 700 M12 195
43 www.supermec.com.sg
a
mounting plate fixing dimension
square circular
EJB 1 A 1 140 70 1 80
maximum number of hubs on long side maximum number of hubs on short side
METRIC M20 M25 M32 M40 M50 M63 M75 M90 M20 M25 M32 M40 M50 M63 M75 M90
NPT 1/2" 3/4" 1" 1" 1/4 1" 1/2 2" 2"1/2 3" 4" 1/2" 3/4" 1" 1" 1/4 1" 1/2 2" 2"1/2 3" 4"
EJB 1 A 6 6 6 4 2 2 1 1 - 4 4 4 2 1 1 1 1 -
EJB 3 A 15 15 12 11 6 6 3 2 2 12 9 9 6 4 4 2 1 1
EJB 4 A 28 24 15 15 11 11 6 3 3 16 12 10 9 6 5 4 2 1
EJB 45 A 32 28 21 18 14 12 8 5 3 20 18 14 12 8 5 5 2 2
EJB 5 A 50 36 32 27 18 15 10 7 5 35 24 20 15 12 8 6 5 3
EJB 55 A 60 50 36 32 21 17 14 8 6 40 35 24 21 15 12 8 6 4
EJB 7 A 96 84 65 48 40 32 24 17 10 60 54 40 28 24 17 15 11 6
www.supermec.com.sg 44
maximum number of terminals size in mm2
EJB 1 A 54 23 18 15 12 9 7 - - -
TERMINALS TERMINALS
45 www.supermec.com.sg
maximum number of operators and windows on cover
push button
code MCB 60 Ah - 3 P
pilot light units
EJB 1 A 6 2
EJB 3 A 15 4
EJB 4 A 24 9
EJB 45 A 35 12
EJB 5 A 54 16
EJB 55 A 70 20
EJB 7 A 84 24
MCB 60 Ah 3P+N
CAPACITORS TRANSFORMERS
PLC MULTI PLEXER
RELAY
WITH EXTERNAL HANDLE
MCB
BALLAST RESISTOR
AUTOMATIC BREAKER
MCB
FUSES
DIGITAL INSTRUMENT
ELECRONIC GEAR CASE MCB
TERMINALS TERMINALS
OPERATORS
ON COVER
EARTH BAR
TERMINALS
www.supermec.com.sg 46
UH - UP
The UH-UP operators are normally used in the chemical and
petrochemical plants, off-shore platforms, refineries and any other
industry where hazardous atmospheres (gas and combustible
dust) are potentially present.
The UH-UP operators range has been designed to meet the main
requirements of power distribution, monitoring and signaling, and
other electrical functions inside the hazardous area of the plant.
00 www.supermec.com.sg
Function
The UH-UP operators are normally installed on EJB , GUB, GUBA and CSD enclosures series used for the following main applications:
• control station and instrument housing •motor starter unit
• electronic grounding system •lighting control panel
and fitted with other electrical and/or electronic equipment as per our client specific requirements.
Construction
The material used to manufacture the UH-UP operators series have been studied to grant the maximum protection against the highly
corrosive agents present in these industries:
• bushing and shaft, as components directly involved into the explosion proof protection, are made of stainless steel
AISI 316. The external body can be made of copper free aluminium or stainless steel
• external handles and internal leverages activating switches and breakers up to 1000 Amp. are made of stainless steel AISI 316
• external handles padlockable (two padlocks) in different position (upon request)
• internal gasket of silicone
• external push button units and pilot light diffusers are made using antistatic and UV-protected polymers
• external push button units have passed a mechanical endurance test of 15 million operation cycles (standard),
1 million (selector) and 300 thousands (emergency)
• contact blocks base can be equipped up to four contacts (NO, NC, NO+NC)
• diffuser with special design to grant a high visibility degree in any situation
• pilot light window of thermoresistant glass sealed with auto-leveling silicone
• integrated labels of polycarbonate, aluminium and stainless steel with possibility to customize the marking as per client specifica-
tions
padlocking
Double padlocking
Protection
certificate number: IMQ 11 ATEX 029 U
marking: ` II 2GD Ex d IIC Gb T6 Ex tb IIIC T85°C Db
ambient temperature: -60°C +60°C
degree of protection: IP66
conformity: Directive ATEX 94/9/EC
standards: EN60079-0 / EN60079-1 / EN60079-31
category: suitable for Zone 1- 21 (gas) and Zone 2 - 22 (dust)
www.supermec.com.sg 60
Code Colour Padlock UHB - UHBP
UHB - Handle unit for MCB up to 125 Amp. complete
UHBP 2 with integrated label with ON - OFF indicators.
UHBP model is provided with a padlockable
system in OFF position to increase the level of
security by unauthorized operators. The handle
can be equipped with two padlocks.
Electrical components not included.
61 www.supermec.com.sg
UPB Code Colour Contact
Spring-return (stay-put upon request)flush UPB R2 NC
pushbutton unit. UPB W1 NO
Bushing ø M32. UPB G1 NO
Supplied complete with one electrical
UPB X2 NC
contact as listed and as option, with different
UPB Y1 NO
combinations of contacts NO and NC for a
UPB B1 NO
maximum number of four units (see table 1).
UPB O1 NO
Available in different colours as per side
table and as option, engraved with electrical
symbols.
www.supermec.com.sg 62
Code Colour Contact UPBM
UPBM R2 NC Spring-return mushroom pushbutton unit.
Bushing ø M32.
Supplied complete with one electrical
contact as listed and as option, with different
combinations of contacts NO and NC for a
maximum number of four units (see table 1).
Available, as option, also in different colours.
63 www.supermec.com.sg
UPBL Code Colour Contact
Spring-return luminaire pushbutton unit. UPL R LED+NC
Bushing ø M32. UPL W LED+NO
Supplied complete with LED unit in different UPL G LED+NO
voltage and one electrical contacts as listed
UPL O LED+NO
and as option, with different combinations
UPL Y LED+NO
of contacts NO and NC for a maximum num-
UPL B LED+NO
ber of four units (see table 1).
Available in different colours as side listed.
www.supermec.com.sg 64
Code Colour Contact UPBD
UPBD GR12 NO - NC
Spring-return double pushbutton unit.
Bushing ø M32.
UPBD WX12 NO - NC
Supplied complete with two electricalcon-
tact as listed and as option, with different
combinations of contacts NO and NC for a
maximum number of four units (see table 1).
Available, as options in different colours,
with or without electrical symbols.
65 www.supermec.com.sg
UPB contacts
The contacts standardized by Supermec for its own range of operators are manufactured by a leading electrical company to allow the
maximum reliability and functionality of the product.
These contacts are normally available worldwide to grant the possibility to the client to solve easily any problem of maintenance and/
or extension of the functions.
Code Contact
UPB C1 1 single NO
UPB C2 2 single NC
UPB C3 3 double NO + NO
UPB C4 4 double NO + NC
UPB C5 5 double NO + NC
Table 1
UPB CO O ORANGE
Code 2AV 2EV 2FV 2FC 2BC 2AC 2EC 3AC 3EC 3FC 3GC
Table 2
Code 2AV 2BV 2CV 2DV 2AC 2BC 3AC 3BC 3CC 3DC
Code 3EC 3FC 3GC 3HC 3LC 3MC 3NC 3PC 3QC 3RC
Table 3
Legenda:
Stay-put Spring-return Key withdrawal position
www.supermec.com.sg 66
UVB - UVD
The UV drain valves and breathers are normally used in the
chemical and petrochemical plants, off-shore platforms, refineries
and any other industry where hazardous atmospheres (gas and
combustible dust) are potentially present.
The drain valves and breathers are specially recommended
for tropical environment where the phenomenon of water
condensation mixed with chemical agents is the first cause of
corrosion of electrical components inside the enclosures.
00 www.supermec.com.sg
Function
The UV drain valves and breathers are normally installed on Ex d and Ex e enclosures. Both models UVB and
UVD can be used as a combination drain and breather. The UVB model is equipped with internal o-ring to
allow an IP66 protection to the enclosure when not in use.
Construction
The material used to manufacture drain valves and breathers UV series have been studied to allow the
maximum protection against the highly corrosive agents present in these industries:
• bushing and shaft, as components directly involved into the explosion proof protection, are made of
stainless steel AISI 316
• internal o-ring of silicone
• external gasket of silicone
• adaptor for thin wall enclosures (≤ 8 mm.) and locknut of stainless steel AISI 316
The UVB - UVD has a double marking Ex d and Ex e to be suitable for every
kind of installation.
Since Ex e enclosures are normally build with thin walls, Supermec
designed a special adaptor to allow the full discharging of water within
a range of 0.8 to 8 mm. wall thickness. An external gasket allows an IP66
protection when the drain valve is not in use.
Protection
certificate number: IMQ 11 ATEX 029 U
marking: ` II 2GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db
ambient temperature: -60°C +60°C
degree of protection: IP66 / IP6X
conformity: Directive ATEX 94/9/EC
standards: EN60079-0 / EN60079-1 / EN60079-7 / EN60079-31
category: suitable for Zone 1 - 21 (gas) and Zone 2 - 22 (dust)
www.supermec.com.sg 100
Methods of installation
The installation of drain valve on
bottom and breather on top side of
enclosure is granting the most com-
plete solution against water conden-
sation since the continuous ventila-
tion minimizes the phenomena.
The internal pressure is pushed out-
side through the breather (chimney
effect) limiting the possible entry of
rain from the top.
101 www.supermec.com.sg
Code Colour Ø
UVB - UVBM
UVB 3/8” NPT
Lockable drain valve and breather unit with
UVBM M 16
internal o-ring for IP66 protection when
closed. Recommended use as breather on
top side for outdoor installations.
Code Colour Ø
UVD - UVDM
UVD 3/8” NPT
Drain valve and breather “alway open” with
UVDM M 16
IP65 protection when installed on the
bottom side. Recommended use as breather
on top side for indoor installations.
Code Colour Ø
UVXE
UVXE M 20
Adaptor Kit for UV with metric thread to
install on Ex e enclosures with wall thickness
range from 0.8 to 8 mm.
www.supermec.com.sg 102
Supermec Private Limited
17 Tuas Ave 20 - Singapore 638828
Tel: (65) 6861 9522
Fax: (65) 6861 0184
sales@supermec.com.sg
www.supermec.com.sg
Supermec d.o.o.
Velika Pot 14
5250 Solkan - Slovenia
Tel. (386) 40 200155
Tel: (39) 335 471319
andrea@supermec.com.sg