Instructions:
Solve all the problems with correct and complete solutions. Use your student number and age to
determine other given. Type the solution in a word format preferably used software like mathtype
for typing equations. Pass your answer before the deadline indicated in the CANVASS. Late
papers will not be entertained. DO NOT COPY the work of your classmates, any indication of
copied works will be a deduction of 100 points on your quizzes. Again, type the solutions and use
cad for the diagrams.
Wdl = 30 + .3
= 30.3 kn/m
Wll = 20(1+ 21/10)
= 62 kn/m
W = 1.2(33) + 1.6(62)
= 135.56 kn/m
Reactions:
6 (135.56)(𝑥) 4 (135.56)(𝑥)
Ma(4) + 2Mb(4+6) + Mc(6) + ∫0 ( ) (62 − 𝑥 2 ) + ∫0 ( )(42 − 𝑥 2 ) = 0
6 4
Ma = 0
Mc = 0
Mb = -474.46
Ra = 152.505
Rc =327.603
Rbright = 485.757
Rbleft = 389.735
Rb= 875.492
Max Shear = 485.757
Effective Depth = 425 – 60 - 40= 325mm
Vu = 441.7 kn
Vc = (0.17)(1)(sqrt(28))(275)(325)/1000 =80.398
Vsmax = (0.66)(sqrt(28))(275)(325)/1000=312.133
Vs = (441.7- (.75)(80.398))/0.75= 508.535
Vs VsMax
508.535>312.133
INADEQUATE
Problem No.2 Calculate the allowable uniform load W that the beam could carry base on
flexure. Assume diameter of stirrups = 10mm.
Fs = 600 ( 321.667-56.999)/56.999
=2786.028
Fs’ =600(56.999-50)/56.999
=73.67 -NOT YIELDING
WRONG ASSUMPTION
Therefore: Use Fs’ for tension bars
1206.372(345)=0.85(24.5)(0.85)(c)(275)+402.134(600(c-50)/c)
c=70.892 mm
a= 60.258mm
Fs = 600(321.667-70.892)/70.392
= 2137.53
Fs’ = 600(70.892-50)/70.892
= 176.821
Mn1= C(d-a/2)
Mn2=C(d-d’)
Mn2 = 402.134(600(60.258-50)/60.258)(321.667-50)
Mn2 = 11.159
Mu = (ReductionFactor)(Mn1+Mn2)
Reduction Factor = .65 + ( Es-.002)(250/3_
Es = .003(321.667-70.892)/70.892
=0.0106123
Reduction Factor = 1.36 = default to 0.90
Mu = 0.9( 100.607+11.159)
=100.589
100.589 = 2.521W
W= 39.9 kn/m ANSWER
Problem No.3 A simply supported beam with span of L and carries a uniform load dead load
and live load. If fc’=28Mpa, and fy =415Mpa, diameter of stirrups = 10mm and concrete cover
of 40mm. calculate the deflection after 3 years assuming 25% of live load is sustained. As = 4-
20mm bars, As’=2-20mm diameter.
last.2.digit.of .your.student.number
WDL = 20 +
10
age
WLL = 15(1+ )
10
L = 5.0m (0-2)
L = 5.5m (3-4)
L = 6.0m (5-7)
L = 6.5m (8-9)
b = 800mm(even)
b = 900mm(odd)
b = 1000mm(zero)
Wdl=
Problem No.4 Design the cantilever beam for shear only, Assume fc’ = 21Mpa and fy = 414
Mpa. fyt = 276Mpa