Anda di halaman 1dari 2

Ultrasonic Instrument

Methods for measuring the transmis-


sion time with transducers acting as
transmitter and receiver, for calcula-
ting the pulse velocity.
Direct
trans-
mission
Testing concrete components
by ultrasonics
The pulse velocity in a material depends on its
density and its elastic properties, which in turn
Semi-direct transmission
are related to the quality and the strength of the
material.
IIt is therefore possible to obtain information
about the properties of components by sonic
investigations:
• Uniformity of the concrete
• Cavities, cracks, defects due to fire and frost
• Modulus of elasticity
Indirect or
• Concrete strength
surface
transmission
Display of all information on a large clear display
Cement type: P for Portland cement
B for blast furnace cement
Correction factor for moisture or
other influences
Rebound value is input on the
keyboard
Measurement number
Transmission time of the sound
waves between the transducers
Distance between the transducers,
unit preselectable: m, ft
Pulse velocity v = l/t
Concrete strength TICO-SCHMIDT The measured values can
unit preselectable N/mm2, MPa, be called up from the
kg/cm2, psi memory by means of the
cursor keys ÇÈ and can
Instructions for operation
be shown on the display.

Combination TICO-SCHMIDT method for determination of the concrete strength σ k


TICO Ultrasonic Instrument SN0010.0039 1.10

100000 50.4 us 0.22 m 4370 m/s 30.7 N/mm^2 34

100001 53.7 us 0.22 m 4100 m/s 26.0 N/mm^2 35

100002 51.9 us 0.22 m 4240 m/s 30.3 N/mm^2 38

100003 56.0 us 0.22 m 3930 m/s 21.8 N/mm^2 33

100004 52.2 us 0.22 m 4210 m/s 26.5 N/mm^2 34

100005 49.9 us 0.22 m 4410 m/s 34.0 N/mm^2 38

100006 50.9 us 0.22 m 4320 m/s 31.5 N/mm^2 37

100007 52.5 us 0.22 m 4190 m/s 26.0 N/mm^2 34

100008 54.7 us 0.22 m 4020 m/s 21.8 N/mm^2 32

Test report CUR 69 of the TNO (The Netherlands) des- Measurement of the re- Under WINDOWS, the
cribes a method by which the concrete strength can be bound value R with the data are transmitted in
calculated using a combination of the rebound value of DIGI-SCHMIDT 2 concrete EXCEL format to a PC with
a SCHMIDT hammer type N and the pulse velocity. This tester. the aid of the terminal pro-

Copyright © 2001 by PROCEQ SA Zurich, Switzerland · Made and printed in Switzerland


mathematical relationship was derived from the test results gram.
of more than 700 test specimens. When the rebound
value R and the cement type are input, TICO calculates Standards: ISO/DIS 8047/BS 1881 Part 201/ASTM C 597/
the strength. NF P 18-556/NBN B 15-229/ UNI 7997/9524/ UNE 83308.

Form supplied
TICO display unit with nonvolatile memory for 250 mea-
sured values, 128 x 128 graphic LCD. RS 232 C Interface.
Integrated software for transmission of the measured
values to PC. Measuring range: ∼15 bis 6553.5 µs
Resolution: 0.1 µs
Voltage pulse: 600 V
Pulse rate: 3/s
Impedance at input: 1k Ω
Temperature range: -10° to +60° C
Battery operation with 6 LR 6 batteries, 1.5 V, for 30 hours.
54 kHz transducers, cable, calibration rod, coup-
ling paste, carrying strap, operating instructions
and carrying case 325 x 295 x 105 mm,
total weight 3 kg.
Accessoires:
Transducers with other frequencies.
Subject to change
2001 11 310 E

PROCEQ SA Tel.: +41 1 389 98 00


Riesbachstrasse 57 Fax: +41 1 389 98 12
CH-8034 Zürich E-Mail: info@proceq.com
Switzerland Internet: www.proceq.com

Anda mungkin juga menyukai