2. Standard 制造标准:IEC60502‐2, IEC60228 class 2.
4. Operating conductions 工作条件:
Maximum conductor operating temperature 导体长期最高工作温度:90℃
Emergency conductor temperature 紧急过载导体温度:105℃
Maximum Short circuit temperature 最高导体短路温度:250℃ (Max. duration 5sec.)
Operating ambient temperature 运行环境温度范围: ‐20℃~ 50℃
The cable must be preheated before installation, when ambient temperature is below 0℃
电缆安装敷设环境温度低于0℃时,敷设前电缆必须预热。
Minimum bending radius of cable for installation:15D (D is overall diameter of cable)
安装时最小弯曲半径(D是电缆外径)
5. Color code 电缆的颜色识别:
Core identification: natural colour
PVC innersheath/bedding(内护套/垫层):black 黑色
MDPE outersheath (外护套):black 黑色。
6. Cable cross‐sectional drawing (Not to scale) 电缆结构示意图(不按比例):
1/3
江苏上上电缆集团有限公司
Jiangsu Shangshang Cable Group Co., Ltd.
7. Cable construction characteristics and electrical characteristics sheet
电缆结构性能和电性能参数表:
Item Description 描述 Unit Offered Data
单位 数据
CABLE CONSTRUCTION PARAMETERS
1 Manufacturer type and size ‐ FSY‐YJLSY63‐ FSY‐ YJLSY63‐
制造商型号规格 8.7/15kV 8.7/15kV
1Cx300mm2 1Cx400mm2
2 AL Conductor 铝导体:
‐Number and diameter of conductor wire before stranding No./mm 36/3.30 60/2.92
‐Nominal conductor diameter 导体标称直径 mm 20.6 23.7
3 Semi‐conducting conductor screen 半导电导体屏蔽:
‐ Minimum thickness 最薄厚度 mm 0.70 0.70
4 XLPE insulation 绝缘:
‐Nominal thickness 标称厚度 mm 4.5 4.5
‐Minimum thickness 最薄厚度 mm 3.95 3.95
5 Semi‐conducting insulation screen 半导电绝缘屏蔽:
‐ Minimum thickness 最薄厚度 mm 0.50 0.50
6 Metallic screen 金属屏蔽:
‐ Number & Dia. of copper wire 铜丝根数/单丝直径 No./mm 44x0.85 53x0.85
‐Nominal thickness of equalizing copper tape 铜带标称厚度 mm 0.1 0.1
‐Total cross‐sectional area of metallic screen 金属屏蔽总截面 mm2 25 35
7 PVC innersheath 内护套:
‐ Nominal thickness 标称厚度 mm 1.3 1.3
‐ Minimum thickness 最薄厚度 mm 0.84 0.84
8 Aluminium tape armour 铠装铝带:
‐Nominal thickness of aluminium tape 标称厚度 mm 0.5 0.5
‐Number of layers of tape 铝带层数 No. 2 2
9 MDPE outersheath 外护套:
‐ Nominal thickness 标称厚度 mm 2.4 2.5
‐ Minimum thickness 最薄厚度 mm 1.72 1.80
10 Approx. overall diameter of cable 电缆计算参考外径 mm 47.4 50.9
11 Approx. weight of cable 电缆计算参考重量 kg/km 2412 2960
ELECTRICAL PARAMETERS
Maximum conductor DC resistance at 20℃: Ω/km 0.100 0.0778
12
20℃导体最大直流电阻
A.C. Voltage test @ 3.5Uo / 5min. ‐ Applied 30.5kV/5min.
13 交流电压试验(3.5Uo/5min.) No breakdown of insulation
14 Ampacity rating of cable 电缆载流量
‐direct buried (@ ground temperature 30℃, soil thermal A 562 678
resistivity: 1.19 K∙m/w, trefoil installation, buried depth
0.8m):
土壤中直埋载流量(土壤温度30℃,土壤热阻系数
1.19K∙m/w, 三叶形敷设方式, 埋地深度0.8m)
Maximum short‐circuit current of conductor
15
最大导体短路电流
‐@ 0.1 sec. kA 89.2 118.9
‐ @ 0.21 sec. kA 63.1 84.1
‐ @ 0.5 sec. kA 39.9 53.2
‐ @ 1 sec. kA 28.2 37.6
2/3
江苏上上电缆集团有限公司
Jiangsu Shangshang Cable Group Co., Ltd.
Item Description 描述 Unit Offered Data
单位 数据
‐ @ 2 sec. kA 19.9 26.6
‐ @ 5 sec. kA 12.6 16.8
‐Maximum short circuit fault current of metallic screen
16
金属屏蔽最大允许短路故障电流
‐@ 0.1 sec. kA 11.4 16.4
‐ @ 0.21 sec. kA 8.0 11.6
‐ @ 0.5 sec. kA 5.1 7.4
‐ @ 1 sec. kA 3.6 5.2
‐ @ 2 sec. kA 2.5 3.7
‐ @ 5 sec. kA 1.6 2.3
Maximum short circuit current of AL TAPE armour
17
铝带铠装的最大允许短路电流
‐@ 0.1 sec. kA 16.1 16.1
‐ @ 0.21 sec. kA 11.4 11.4
‐ @ 0.5 sec. kA 7.2 7.2
‐ @ 1 sec. kA 5.1 5.1
‐ @ 2 sec. kA 3.6 3.6
‐ @ 5 sec. kA 2.3 2.3
8. Cable Marking:
The following information shall be printed on the surface of outersheath of cable by inkjet printing method.
for example:
JIANGSU SHANGSHANG CABLE GROUP ELECTRIC CABLE 8.7/15kV AL/XLPE/CTS/PVC/DATA/MDPE(AT,AR) TO
IEC60502‐2, IEC60228 CL2, FSY‐YJLSY63‐1KV 1CX300MM2 XXXXM
JIANGSU SHANGSHANG CABLE GROUP ELECTRIC CABLE 8.7/15kV AL/XLPE/CTS/PVC/DATA/MDPE(AT,AR) TO
IEC60502‐2, IEC60228 CL2, FSY‐YJLSY63‐1KV 1CX400MM2 XXXXM
9. Factory Inspection & Test :
Inspection & Test shall be carried out according to IEC60502‐2. Testing items are routine test and sample test
given in IEC60502‐2:2014.
Routine test: ‐Partial discharge test, ‐A.C. voltage test, ‐D.C. resistance test of conductor
Sample test: ‐Conductor examination, ‐check of dimensions, ‐Hot set test of XLPE insulation
10. Packing:
The cable shall be packed in steel‐wooden drums with wooden battens sealed.
Standard drum length: (1) for 1x300mm2 cable: 1000m per reel with a tolerance of ±3%
(2) for 1x400mm2 cable: 1000m or 1400m per reel with a tolerance of ±3%
11. Drum marking: A label with the following making information shall be placed on each side of drum flange.
‐Buyer Name:
‐Project Name:
‐Manufacturer: Jiangsu Shangshang Cable Group Co.,Ltd.
‐Cable description: 8.7/15KV AL/XLPE/PVC/DATA/MDPE(AT,AR) CABLE
‐Cable type and size: FSY‐YJLSY63‐8.7/15KV 1X300mm2
‐Drum length: m
‐Net weight and gross weight: KG/ KG
‐Drum Number:
3/3