ACKNOWLEDGEMENT
love, the knowledge and wisdom to do all the things that I must able
perform task and challenges that are obstacles to finish all the time.
“Commit your actions to the Lord, and your plans will succeed”
the time even through the busiest time during this On the job training
training.
San Sebastian College – Recoletos de Cavite
To all of my friends and classmates for the support and
Gentle Cordova for the tips and encouragement, Sir Ryan Pabustan for
the trust given to us trainee, Sir Allan Parin for trusting us and have us
develop our confidence in making and developing new things the world
needed from us future engineers, to our line leaders Sir Adrian and Sir
Jun for all the things they taught us that can help us experience the
things to do on our future jobs and lastly to our kuya’s the employees
that didn’t think twice to help us in the task given to us and provide us
WEEKLY
NARRATIVE
REPORT
profile also the rules and regulations within the premises of the
and boards which are needed for the production of different wire
clean and workers are in proper uniform also on our department and
our bosses look nice from the supervisor down to the line leader. The
department section leader Sir Allan Parin welcomed us in care off the
meeting. The next few days our line leader Sir Adrian gave us order
in order to check the sequence of wires in the insertion Jig also used
San Sebastian College – Recoletos de Cavite
by the quality checker for the wire harnesses to be properly check and
avoid miswiring.
switching base,25 for me and 25 for Ryan. While doing the switching
to lessen the working time. Even though each worker have their own
which sometimes take time. Also following last week report we have
the crew and also from our supervisor and section leaders. Also I have
called “Sir TK” he is so nice and approachable seems all Japanese are
all like that, as they give so much respect for other people as they
dismantle older jigs and boards that after dismantling it other parts
materials, fiber glass, woods and other materials which are not needed
anymore. Also we have been taught by sir jun as they call him one of
the skilled worker inside the department which he repairs things used
counter for the finished wire harness and also a checker that is
staffs needed for faster mass production of wire harness and to replace
old boards. Then after that we are also intruct to help Rodel and Jesher
casing of a jig, it may be a holder or other basic circuit repair that other
co workers cannot finished for the repairs of devices compile up. Also
we explore the whole production area with kuya Ericson the FOD/JIG
help him check all the boards and jigs used in every section of the
production and we put a checking stab on the board and jig and have
supply which are requested by the production section that they needed
for the automated jigs that needed 5 volts power supply. In the process
avoid power outrage that can damage the devices and that can cause
to built cases for it yet the fiber glass are short to be finished so we
waited Jesher to finish cutting the fiber glass needed in their laser
cutting machine. Then we made some errands for our quality checker
Tyang Fely also for our assistant supervisor Sir Ryan Pabustan.
within the production area as their assistant for their jobs to finished
for them to be finished and other projects that our supervisor needed
in presentation of the new device that can help the the production to
harnessses. Also during our last stay we are given a token of gift the
workers done for us, a fiber glass with our names engraved to it using