2926201
Cat® HYDO™ Advanced 10
6,000 Hour Extended Drain Intervals
Cat is introducing a new hydraulic oil to the ßuid product line, Cat HYDO Advanced 10.
This new oil is a combination of premium additives and specially selected and controlled
higher quality base oils designed to provide extended drain intervals and extra protection
to hydraulic system components.
and improve transport of contaminants through the Þlters. Compatible with Cat Ultra High
EfÞciency Þlters.
• Improved corrosion protection — protects metal surfaces from rust. Better corrosion
protection than most oils in the Cat line-up.
• Faster air release — rapid air separation reduces air release time, preventing cavitation,
Cat HYDO Advanced 10 air release time of less than 4 minutes is far superior compared
to Cat HYDO 10W at 7-10 minutes air release time (per ASTM D3427 testing).
• Wide temperature range protection — maintains consistent wear protection at both cold
and hot temperatures. Designed to ßow readily at cold temperature start up, and maintains
excellent wear protection at operating temperatures.
• Improved oil stability — 250% increase in oxidation stability per ASTM D943. Improved oil
stability and wear protection make Cat HYDO Advanced 10 last longer.
(Continued)
5-16
Hydraulic Oil Oils
2926201
Cat® HYDO™ Advanced 10 (Continued)
Cat HYDO Advanced 10 Typical Characteristics {A}
Characteristics HYDO Advanced 10 Typical Diesel Engine Typical Premium HYDO Advanced 10
Oil API CF SAE 10W Industrial Hydraulic Oil, Advantages
HVLP or HV
SAE Viscosity Grade 10W 10W Varies
Viscosity
cSt @ 40° C (ASTM D445) 42 40 46 Better wear protection,
wider operating
temperature range
Equipment Fluids
4 Ball (40 kg/30 min/ 0.37 mm Varies Varies --
600 rpm/93° C ASTM D4172)
Pour Point, °C (ASTM D97) -39 -30 -36 --
{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product.
SpeciÞcations are subject to change without notice.
{B} Oils that contain viscosity modiÞer additives will become thinner during use in this machine. This will reduce protection level.
{C} Higher is typically better, but too much active anti-wear additives may lead to reduced component life.
{D} 1A is better than 1B, 1A at 150° C is better than 1A at 100° C.
(Continued)
5-17
Oils Hydraulic Oil
2926227
Cat® HYDO™ Advanced 10 (Continued)
Cat HYDO Advanced 10 Typical Characteristics
Characteristics HYDO Advanced 10 Typical Diesel Engine Oil Typical Premium HYDO Advanced 10
API CF SAE 10W Industrial Hydraulic Oil, Advantages
HVLP or HV
Rust Protection Pass Varies Varies Corrosion protection
(ASTM D665B) {E}
Oxidation stability, hours >5,000 2,000 hours 2,000 hours Long Drain Interval,
(ASTM D943) lower owning and
operating costs
Long Drain Interval, Yes No No --
conÞrmed by
Þeld testing
Filterability, Wet, E DIN Pass Fail Pass Reduced Þlter plugging
ISO 13357-1 improves contamination
control, due to better
Þltration
Air Release @ 50° C 4 minutes 7-10 minutes 7-13 minutes Better air release
(ASTM D3427) reduces cavitation
damage
Foam Test {F} Varies Varies --
Seq. 1 ml. (ASTM D892) 0/0 --
Seq. 2 ml. (ASTM D892) 5/0 --
Seq. 3 ml. (ASTM D892) 0/0 --
Equipment Fluids
English Volume Metric Volume Package English Volume Metric Volume Package
(gal) (L) Quantity Part Number (gal) (L) Quantity Part Number
1 -- 4 309-6932 -- 60 -- 309-6941
5 -- -- 309-6931 -- 200 -- 309-6940
55 -- -- 309-6930 -- 205 -- 309-6939
Bulk -- -- 314-5168 -- 208 -- 309-6938
Bulk Railcar -- -- 309-6929 -- 1000 -- 309-6937
-- 5 -- 309-6945 -- 2000 -- 309-6936
-- 18 -- 309-6944 -- 10 000 -- 309-6935
-- 19 -- 309-6943 -- 15 000 -- 309-6934
-- 20 -- 309-6942 -- 15 004 -- 314-5169
5-18