Anda di halaman 1dari 8

TestPDF 認證大師

台灣、香港服務站 | 認證考試題庫

http://www.testpdf.net
為期一年的免費更新服務
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!

Exam : 2V0-620

Title : vSphere 6 Foundations Exam

Vendor : VMware

Version : DEMO

1 from Testpdf.net.
Get Latest & Valid 2V0-620 Exam's Question and Answers 1
http://www.testpdf.net/2v0-620.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!

NO.1 When attempting to power on a Virtual Machine you observe the following error:
Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it
depends on.
Which three actions will be the best solutions to address this problem? (Choose three.)
A. Verify that the virtual machine's disk files are present.
B. Investigate the host and virtual machine log files.
C. Verify the vmdk descriptor files and if required, recreate them.
D. Delete the disk file preventing the power on operation.
E. Migrate or register the virtual machine to a different host.
Answer: A,B,C

NO.2 An administrator deploys vCenter Server using the embedded Platform Services Controller.
After testing the deployment for a couple of months, it is determined that the environment would be
better served with an external Platform Services Controller.
What should the administrator do to meet this new requirement?
A. Deploy a fresh instance of vCenter Server with an external Platform Services Controller.
B. Perform a fresh install of an external Platform Services Controller.
C. Migrate the embedded Platform Services Controller to an external Platform Services Controller.
D. Upgrade the embedded Platform Services Controller to an external Platform Services Controller.
Answer: D

NO.3 Refer to the Exhibit.


-- Exhibit --

-- Exhibit --
An administrator has configured network connectivity for a new virtual machine, as shown in the
Exhibit.
What will occur with the network traffic of this virtual machine when communicating externally from
vSwitch1?
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
Answer: D

2 from Testpdf.net.
Get Latest & Valid 2V0-620 Exam's Question and Answers 2
http://www.testpdf.net/2v0-620.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!

NO.4 An administrator has purchased a new 10GB Converged Network Adapter (CNA) for installation
in a system that is running ESXi 6.x. The administrator has downloaded the latest driver from the
hardware vendor and wants to include the driver in an image. The image profile acceptance level is
set to VMwareSupported. The acceptance level of the driver is VMwareSupported.
Which two statements are true about the inclusion of this driver in the image? (Choose two.)
A. Support calls for the driver will be directed to the partner.
B. The image can be built, but the driver will not be included in the image.
C. The image can be built and the driver will be included.
D. Support calls for the driver will be handled by VMware.
Answer: A,C
Explanation:
The acceptance level of all VIBs on a host must be at least as high as the host acceptance level. For
example, if the host acceptance level is VMware Accepted, you can install VIBs with acceptance levels
of VMware Certified and VMware Accepted, but you cannot install
VIBs with acceptance levels of Partner Supported or Community Supported. To install a
VIB with a less restrictive acceptance level than that of the host, you can change the acceptance level
of the host by using the vSphere Client or by running esxcli software acceptance commands.
Setting host acceptance levels is a best practice that allows you to specify which VIBs can be installed
on a host and used with an image profile, and the level of support you can expect for a VIB. For
example, a Community Supported VIB might not be recommended for an ESXi server in a production
environment.
http://pubs.vmware.com/vsphere-
50/index.jsp?topic=%2Fcom.vmware.vsphere.upgrade.doc_50%2FGUID-27BBBAB8-01EA-4238-8140-
1C3C3EFC0AA6.html

NO.5 Refer to the Exhibit.

An administrator is adding an NFS datastore as shown in the Exhibit.

3 from Testpdf.net.
Get Latest & Valid 2V0-620 Exam's Question and Answers 3
http://www.testpdf.net/2v0-620.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!

What is the purpose of the Servers to be added list?


A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for Dynamic Discovery of targets.
D. It contains the IP addresses used for Static Discovery of targets.
Answer: A

NO.6 Which three are requirements when using vMotion to move a virtual machine across vCenter
Server systems? (Choose three.)
A. Both vCenter Servers must be using Enhanced Linked Mode.
B. Both vCenter Servers must be in the same Single Sign-On Domain.
C. Time must be synchronized.
D. Duplicate VM MAC addresses must be configured.
E. Both vCenter Servers must have High Availability enabled on source and destination clusters.
Answer: A,B,C

NO.7 You are editing the management network configuration of an ESXi 6.x Host from the vSphere
Web Client. You mistakenly put the incorrect VLAN in place for the management network.
What action do you need to take to correct this?
A. You need to manually edit the configuration on the host with command line utilities.
B. No action is required. By default ESXi rolls back configuration changes that disconnect the host.
C. The ESXi host system configuration will need to be restored to the factory configuration to fix the
issue.
D. The change can be reverted in the vSphere Web Client by simply editing the switch again.
Answer: B

NO.8 Refer to the Exhibit.

A storage administrator has reported that full utilization of all bandwidth from an ESXi 6.x host is not
being seen. In troubleshooting the issue, the Adapter details are shown in the
Exhibit.

4 from Testpdf.net.
Get Latest & Valid 2V0-620 Exam's Question and Answers 4
http://www.testpdf.net/2v0-620.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!

Based on the exhibit, what is cause of the issue?


A. The array is not setup to use the correct multipathing policy.
B. There are no virtual machines on the ESXi host.
C. Not all links are used because a path is disabled.
D. Another path needs to be configured.
Answer: C

NO.9 An administrator is using Update Manager 5.x to update virtual appliances in a vSphere
environment.
The environment is using the vCenter Server Virtual Appliance (vCSA).
What would cause the remediation to fail?
A. Updating of the appliance can only be done if the vCenter Server Virtual Appliance (vCSA) has
been put into Maintenance Mode.
B. Remediation must be configured on the Appliance Administration page before use.
C. Remediation of the vCenter Server Virtual Appliance (vCSA) with Update Manager is not
supported.
D. Remediation requires the hosts to be connected to vCenter using an IPv4 address.
Answer: D
Explanation:
Update Manager 5.0 does not support virtual machine patch baselines. If a host is connected to
vCenter Server by using an IPv6 address, you cannot scan and remediate virtual machines and virtual
appliances that run on the host.

NO.10 What are two valid use cases for vCenter Server Linked Mode? (Choose two.)
A. An administrator wants to migrate running virtual machines between vCenter Server instances.
B. An administrator wants to increase the vRAM entitlement pool.
C. An administrator wants to manage a virtual server environment and a View environment from the
same pane of glass.
D. An administrator wants to search all inventory objects across multiple vCenter Server
Virtual Appliance (vCSA) instances from one vSphere Client
Answer: B,C
Reference: http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-
vcenter-server-50-host-management-guide.pdf (page 53)

NO.11 An administrator is moving a virtual machine into a resource pool. The VM and resource pool
are configured as shown:
VM configuration:
* 2GHz CPU reservation
* 1GB Memory limit
Resource Pool configuration:
* 6GHz CPU reservation
* 1GB Memory reservation
* No limit to memory
What happens to the virtual machine's resource settings when it is moved into the pool?

5 from Testpdf.net.
Get Latest & Valid 2V0-620 Exam's Question and Answers 5
http://www.testpdf.net/2v0-620.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!

A. The VM inherits the resource settings of the resource pool if expandable reservations is enabled.
B. The VM's reservations and limits are ignored and removed.
C. The VM keeps the 2GHz CPU reservation but receives the 1GB memory reservation.
D. The VM keeps the 2GHz CPU reservation and the 1GB Memory limit.
Answer: D

NO.12 Which two storage controller configurations can be used with Virtual SAN? (Choose two.)
A. SAS controllers in Passthrough mode
B. SAS controllers in RAID0 mode
C. SAS controllers in RAID1 mode
D. SAS controllers in RAID10 mode
Answer: A,B

NO.13 An administrator is virtualizing a physical application server and adding it to an existing multi-
tiered vApp. The application license is currently tied to the physical NIC's MAC address, so the
administrator needs to ensure the license will function properly in the virtual machine.
Which two actions can the administrator take to satisfy this task? (Choose two.)
A. Set the MAC address for the vNIC in the guest operating system.
B. Install the physical server's NIC into the ESXi host.
C. Configure the MAC address for the vNIC using the vSphere Web Client.
D. Assign the physical server NIC's MAC address in the vSphere Distributed Switch.
Answer: A,C

NO.14 An administrator is performing a scripted installation of ESXi 6.x.


In which three locations does the script need to be? (Choose three.)
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
Answer: B,C,D

NO.15 An administrator is upgrading an ESXi 3.5 host to ESXi 6.x with an intermediate upgrade to
4.0 using Update Manager. The host has a single Intel Xeon processor, 4GB of RAM, and a VMFS
datastore on a private, SAN-attached LUN. What might cause the upgrade to be unsuccessful?
A. The ESXi host has 4GB RAM.
B. The ESXi host has one processor.
C. ESXi 3.5 is not supported for upgrade.
D. Update Manager cannot upgrade a previously upgraded host.
Answer: C
Reference:
http://pubs.vmware.com/vsphere-
50/index.jsp?topic=%2Fcom.vmware.vsphere.upgrade.doc_50%2FGUID-AA106086-E10D-456E-B0B9-

6 from Testpdf.net.
Get Latest & Valid 2V0-620 Exam's Question and Answers 6
http://www.testpdf.net/2v0-620.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!

340D3D1462C3.html

NO.16 An application running in a virtual machine is experiencing performance issues.


When utilizing performance monitoring utilities, it is noted that the CPU Utilization of the application
is at 100%.
Which two scenarios are probable causes of the CPU contention for the application? (Choose two.)
A. There is a network I/O constraint.
B. There is a storage I/O constraint.
C. There is insufficient disk space assigned to the virtual machine.
D. The application is not virtualization aware.
Answer: A,B

7 from Testpdf.net.
Get Latest & Valid 2V0-620 Exam's Question and Answers 7
http://www.testpdf.net/2v0-620.html

Anda mungkin juga menyukai