Anda di halaman 1dari 14

Getting Started with TcPro Global

User Manual
Version 1.0

No part of this document may be reproduced or transmitted in any form or by any means electronically or mechanically including
photocopying, scanning, recording or by any form of storage or retrieval facility unless and otherwise expressly permitted by
N2N.

N2N Connect Berhad: Wisma N2N, Level 9, Tower 2, Avenue 3, Bangsar South, No. 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia.
Tel: (603) 2241 1818 Fax: (603) 2241 1616 Website: www.n2nconnect.com
Getting Started With TCPro Global TM

All the Intellectual Property Rights including but not limited to the copyright in this user manual shall at
all times remains to be the property of N2N Connect Berhad, and the furnishing of this user manual do
not transfer or grant the user any of the Intellectual Property Rights.

The relationship established herein is merely a licensor and licensee relationship and N2N Connect
Berhad hereby expressly exclude whatsoever liability that may arise from the use of this user manual
and/or the application software known as “TCPro GlobalTM” owned by N2N Connect Berhad.

INDEMNIFICATION:

The user acknowledges that N2N Connect Berhad and its affiliates and employees will not be held
accountable for any damages, including of but not limited to any monetary losses resulting from the
use of this user manual and any information interpreted here from. User agrees to indemnify and hold
N2N Connect Berhad, the producer of this user manual, against any lawsuits, claims or damages arising
from the use of this user manual.

RESERVED RIGHT:

N2N Connect Berhad reserves the right to modify this user manual without any prior notification.

For further enquiries, please contact our Helpdesk at:

N2N Connect Berhad


Wisma N2N, Level 9, Tower 2, Avenue 3, Bangsar South,
No.8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia.

Tel : (603) – 2241 1333

Fax : (603) – 2241 1616

Email : n2nops@n2nconnect.com

2
Getting Started With TCPro Global TM

Document Revision History

PRODUCT: CUSTOMER: VERSION NO:


TCPro GlobalTM V6.01 B1 General 1.0

TITLE: AUTHOR:
Getting Started User Manual Lorando Loh
Doc. Description of Change Prepared by: Reviewed by: Approved by:
Version Date: Date: Date:
Number
1.0 New Release Lorando Loh
26/05/2015

3
Getting Started With TCPro Global TM

Table of Contents

TCPRO GLOBALTM APPLICATION SETUP ... 5

1.1 Operation Pre-requisites ....................... 6

1.2 How to Activate ................................... 7

1.2.1 Activation Process ................................8

1.3 How to Login ..................................... 12

1.3.1 Login Process .................................... 12

4
Getting Started With TCPro Global TM

TCPro GlobalTM Application Setup

This chapter provides the guidelines for first time users of TCPro GlobalTM to perform the installation
and activation process in order to use this application.

Guidelines include the following topics:

1.1 Operation Pre-requisites

1.2 How to Activate

1.2.1 Activation Process

1.3 How to Login

1.3.1 Login Process

5
Getting Started With TCPro Global TM

1.1 Operation Pre-requisites

I. Software Requirements

The following are the recommended software applications:

 TCPro GlobalTM application

 Microsoft Windows 2000/XP/Vista (to run on minimum hardware requirements) or Microsoft


Windows 7 (to run on recommended hardware requirements)

II. Hardware Requirements

The following are the minimum and recommended hardware requirements:

No. Hardware Minimum Recommended


1 Processor Intel Core2Duo Intel Core2Duo
2 RAM 2 GB 4 GB
3 Available Hard Disk Space 1 GB 5 GB and above
4 Graphics Card 128MBs Intel(R) HD
5 Internet/LAN 128Kbps 100Mbps
19” Wide 21” Wide and above
6 Monitor

7 Monitor Resolution 1024 x 768 1600 x 1200 or Higher


8 Keyboard and Mouse Standard Standard

Apart from the above, Microsoft Windows Regional Setting should be set to English (US).

6
Getting Started With TCPro Global TM

1.2 How to Activate

I. In order to start the TCPro GlobalTM application, double-click on the TCPro GlobalTM icon.

TCPro GlobalTM System will start loading the application resources as shown in Figure 1.1 below:

Figure 1.1 – Loading image of TCPro GlobalTM

II. A first-time user is required to undergo Activation process followed by the Login process.

Figure 1.2 – 1st Time Use of TCPro GlobalTM

III. User is also required to maintain a valid trading account with N2N panel broker in order to register
user’s dedicated email address for receiving system-generated access code.

## For guests whom received a complimentary TCPro GlobalTM application package during N2N
Products Launching Event 2015, N2N will send a system-generated access code to the guests via
their dedicated email.

7
Getting Started With TCPro Global TM

1.2.1 Activation Process

1. An Activation window will prompt for user to request for access code (as shown in Figure 1.3).

1.1 For first-time user who have not obtained access code, click “Request Access Code”.

1.2 For users who have received access code via dedicated email, click “Enter Access Code” to
proceed.

Figure 1.3 – Activation Window – Step 1

2. Following action performed in 1.1 mentioned above, a Request Access Code window will prompt, as
shown in Figure 1.4(a).

 Use Setting button to establish Internet Connectivity Setting for proxy server, as shown in
Figure 1.4(b);

 Enter the user dedicated email address and click Next button to proceed.

Figure 1.4(a) – Activation Window – Step 2 (enter Email Address)

8
Getting Started With TCPro Global TM

Figure 1.4(b) – Activation Window –Step 3 (Internet Connection Setting)

3. System notifies that the Access Code will be sent to user’s registered Email Address, as shown in
Figure 1.5(a).

 Click on the Next button to proceed.

Figure 1.5(a) – Activation Window – Step 4

 Open and check user’s mail inbox for TcPro Global’s system-generated email, bearing
subject title “TradeConnect Activation Request”, as shown in Figure 1.5(b).

Figure 1.5(b) – Sample of email sent by TCPro GlobalTM System

4. Continue from step 3, or following the action performed in 1.2 mentioned above, system will
prompt a Enter Access Code window, requesting user to enter the Access Code sent to user’s
dedicated email address (as shown Figure 1.6).

Use the Setting button to establish Internet Connectivity Setting for proxy Server (if not yet).

9
Getting Started With TCPro Global TM

Figure 1.6 – Activation Window – Step 5 (To enter Access Code)

5. At the field of Access Code, enter the access code provided by the system via dedicated email.

 Click on the Next button to proceed (as shown Figure 1.7).

Figure 1.7 – Activation Window – Step 6

10
Getting Started With TCPro Global TM

6. A window message showing “Activation successful” is prompt (as shown in Figure 1.8).

Figure 1.8 – Activation successful


7. Activation process is now successfully completed.

 Click on the Finish button to proceed.

 System is preparing to login to TCPro GlobalTM application by showing a message of


“Preparing to login” (as shown in Figure 1.9).

Figure 1.9 – TcPro Global is loading

8. TCPro GlobalTM System is now ready for user to perform Login.

11
Getting Started With TCPro Global TM

1.3 How to Login

1.3.1 Login Process

Upon successful activation, a Login window (shown in Figure 1.10) will prompt for user to perform the
following actions:-

1. Select Broker link for login (from drop-down list of N2N panel brokers);

2. Enter user Login ID;

3. Enter user Password;

4. Select (tick the checkbox) to request system remember user login ID, password, online client
and/or client list;

5. Click on Submit button to proceed; otherwise click Cancel to discontinue.

6. User may use Forgot Password ( ) button to request a new login password.
 Retrieve Hint information will be sent to user’s dedicated email.
 User is required to use this information to fill-up “Hint to Password” and also complete
the “Answer to Hint”.
 A new password would then be generated and emailed by system to user.
** User is advised to change to a new password upon receiving system password.

Figure 1.10 – Login Window

7. User may also click on the Setting ( ) button to establish Internet Connectivity Setting for proxy
server (as shown in Figure 1.12).

12
Getting Started With TCPro Global TM

Figure 1.11 – Internet Connection Setting

8. Upon completion of Login process, user can now view the full window of TCPro GlobalTM (as
shown in Figure 1.12)

Figure 1.12 – TCPro GlobalTM window

13
Getting Started With TCPro Global TM

14

Anda mungkin juga menyukai