Anda di halaman 1dari 155

HUAWEI CBS

R002C02LLA302

Performance Metrics Reference

Issue 01
Date 2011-02-26

HUAWEI TECHNOLOGIES CO., LTD.


Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.


Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website: http://www.huawei.com
Email: support@huawei.com

Issue 01 (2011-02-26) Huawei Proprietary and Confidential i


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference About This Document

About This Document

Intended Audience
This document describes the performance indexes of the BMP, CBEAgent, PreMsg,
DCCAdapter, RCOMM, SCP, CBP, Billing and AR from the perspectives of such as the
meaning, measurement point, and formula.
This document is intended for:
l Technical support engineers
l Maintenance engineers

Change History
Updates between document versions are cumulative. Therefore, the latest document version
contains all updates made to previous versions.

Changes in Issue 01 (2011-02-26)


Release for the first time.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential iii


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference Contents

Contents

About This Document...................................................................................................................iii


1 Performance Terms....................................................................................................................1-1
2 The Performance Indexes of the BME System.....................................................................2-1
2.1 Request Statistic of BME................................................................................................................................2-2
2.1.1 About Request Statistic of BME............................................................................................................2-2
2.1.2 Number of Concurrent Requests............................................................................................................2-2
2.1.3 Number of Received Requests...............................................................................................................2-3
2.1.4 Number of Successful Requests.............................................................................................................2-4
2.1.5 Number of Failed Requests....................................................................................................................2-4
2.1.6 Number of In-Time Responses..............................................................................................................2-5
2.1.7 Total Response Duration........................................................................................................................2-5
2.1.8 Minimum Response Duration................................................................................................................2-6
2.1.9 Maximum Response Duration................................................................................................................2-7
2.1.10 Number of Requests Per Second..........................................................................................................2-7
2.1.11 Response Avg Time.............................................................................................................................2-8
2.1.12 Request Success Rate...........................................................................................................................2-8
2.1.13 Response Betimes Rate........................................................................................................................2-9
2.2 Statistic of Message Delay..............................................................................................................................2-9
2.2.1 About Statistics of Message Delay.......................................................................................................2-10
2.2.2 Request Number in [0,1s).....................................................................................................................2-10
2.2.3 Request Number in [1,3s).....................................................................................................................2-11
2.2.4 Request Number in [3,5s).....................................................................................................................2-11
2.2.5 Request Number in [5,10s)...................................................................................................................2-12
2.2.6 Request Number in [10,15s).................................................................................................................2-12
2.2.7 Request Number in [15,max)...............................................................................................................2-13
2.2.8 Response Betimes Rate........................................................................................................................2-13

3 The Performance Indexes of the RCOMM System.............................................................3-1


3.1 Statistics of RComm Messages.......................................................................................................................3-2
3.1.1 About Statistics of RComm Messages...................................................................................................3-2
3.1.2 Number of Received Requests...............................................................................................................3-2
3.1.3 Number of Concurrent Requests............................................................................................................3-3
3.1.4 Number of Successful Requests.............................................................................................................3-3

Issue 01 (2011-02-26) Huawei Proprietary and Confidential v


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Contents Performance Metrics Reference

3.1.5 Number of Failed Requests....................................................................................................................3-4


3.1.6 Number of In-Time Responses.............................................................................................................. 3-5
3.1.7 Request Success Rate.............................................................................................................................3-5
3.1.8 Response Betimes Rate..........................................................................................................................3-6

4 The Performance Indexes of the CBEAgent System...........................................................4-1


4.1 CBEAgent Reverse Order Pending Business statistics...................................................................................4-2
4.1.1 Statistics on the Pending of CBEAgent Reverse Orders........................................................................4-2
4.1.2 Pending Reverse Order...........................................................................................................................4-2
4.1.3 Number of Reverse Orders Failed to Be Transferred.............................................................................4-3
4.1.4 Number of Reverse Orders Successfully Transferred............................................................................4-3
4.1.5 Reverse Order Total Number.................................................................................................................4-4
4.1.6 Reverse Order Error Rate.......................................................................................................................4-5

5 The Performance Indexes of the PreMsg System................................................................5-1


5.1 Statistics of PreMsg Result............................................................................................................................. 5-2
5.1.1 About Statistics of PreMsg Result......................................................................................................... 5-2
5.1.2 Number of Successful Messages............................................................................................................5-2
5.1.3 Number of Failed Messages...................................................................................................................5-3
5.1.4 Request Total Number........................................................................................................................... 5-3
5.1.5 Request Success Rate.............................................................................................................................5-4
5.2 Statistics of PreMsg Delay..............................................................................................................................5-5
5.2.1 About Statistics of PreMsg Delay..........................................................................................................5-5
5.2.2 Message Delay less than 10ms...............................................................................................................5-6
5.2.3 Message Delay less than 20ms...............................................................................................................5-6
5.2.4 Message Delay less than 50ms...............................................................................................................5-7
5.2.5 Message Delay less than 100ms.............................................................................................................5-7
5.2.6 Message Delay less than 200ms.............................................................................................................5-8
5.2.7 Message Delay less than 1s....................................................................................................................5-8
5.2.8 Message Delay more than 1s..................................................................................................................5-9
5.2.9 Process Max Time..................................................................................................................................5-9
5.2.10 Process Time Total.............................................................................................................................5-10
5.2.11 Message Delay Total Time................................................................................................................5-10
5.2.12 Message Delay Avg Time..................................................................................................................5-11
5.2.13 Response Betimes Rate......................................................................................................................5-12
5.3 Preprocessed bills statistics...........................................................................................................................5-12
5.3.1 About Preprocessed Bills Statistics......................................................................................................5-13
5.3.2 Success CDR File Number...................................................................................................................5-13
5.3.3 Repeated CDR File Number................................................................................................................5-13
5.3.4 Failed CDR File Number.....................................................................................................................5-14
5.3.5 Totle CDR File Number.......................................................................................................................5-15
5.3.6 Rate Of Dispatch Failed CDR File.......................................................................................................5-15
5.4 Preprocessed bills deal statistics...................................................................................................................5-16
5.4.1 About Preprocessed CDR Statistics.....................................................................................................5-16

vi Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference Contents

5.4.2 Number of Successful CDRs................................................................................................................5-16


5.4.3 Number of Failed CDRs.......................................................................................................................5-17
5.4.4 Number of total CDR...........................................................................................................................5-17
5.4.5 Rate of disposal failed CDR.................................................................................................................5-18
5.5 Preprocessed bills deal time delay statistics..................................................................................................5-19
5.5.1 About Preprocessed bills deal time delay statistics..............................................................................5-19
5.5.2 Message Delay less than 10ms.............................................................................................................5-19
5.5.3 Message Delay less than 20ms.............................................................................................................5-20
5.5.4 Message Delay less than 50ms.............................................................................................................5-21
5.5.5 Message Delay less than 100ms...........................................................................................................5-21
5.5.6 Message Delay less than 200ms...........................................................................................................5-22
5.5.7 Message Delay less than 1s..................................................................................................................5-22
5.5.8 Message Delay more than 1s................................................................................................................5-23
5.5.9 Process Max Time................................................................................................................................5-23
5.5.10 Process Time Total.............................................................................................................................5-24
5.5.11 Message Delay Avg Time..................................................................................................................5-24
5.5.12 Response Betimes Rate......................................................................................................................5-25
5.6 Statistics of Session.......................................................................................................................................5-26
5.6.1 About Statistics of Session...................................................................................................................5-26
5.6.2 Number of Concurrent Sessions...........................................................................................................5-26
5.6.3 Number of Timeout Sessions...............................................................................................................5-27
5.6.4 Number of Sessions Where Charging Is Complete Successfully........................................................5-27
5.6.5 Bill Failed session number...................................................................................................................5-28
5.6.6 Request session total number...............................................................................................................5-28
5.6.7 Request Success Rate...........................................................................................................................5-29
5.6.8 CAPS....................................................................................................................................................5-30
5.7 Statistics of Session delay.............................................................................................................................5-30
5.7.1 About Statistics of Session Delay........................................................................................................5-31
5.7.2 Session Delay less than 1s....................................................................................................................5-31
5.7.3 Session Delay less than 10s..................................................................................................................5-32
5.7.4 Session Delay less than 60s..................................................................................................................5-32
5.7.5 Session Delay less than 300s................................................................................................................5-33
5.7.6 Session Delay less than 600s................................................................................................................5-33
5.7.7 Session Delay less than 3600s..............................................................................................................5-34
5.7.8 Session Delay more than 3600s...........................................................................................................5-34
5.7.9 Process Max Time................................................................................................................................5-35
5.7.10 Process Time Total.............................................................................................................................5-35
5.7.11 Response Avg Time...........................................................................................................................5-36
5.8 Statistics of unsuccessful Session.................................................................................................................5-37
5.8.1 About Statistics of Unsuccessful Sessions...........................................................................................5-37
5.8.2 Unsuccessful Number..........................................................................................................................5-37

6 The Performance Indexes of the DCCAdapter System .....................................................6-1

Issue 01 (2011-02-26) Huawei Proprietary and Confidential vii


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Contents Performance Metrics Reference

6.1 Statistics of DCC Messages............................................................................................................................6-2


6.1.1 About Statistics of DCC Messages........................................................................................................6-2
6.1.2 CCR Initial Message Number................................................................................................................6-3
6.1.3 CCA Initial Message Number................................................................................................................6-3
6.1.4 CCR Update Message Number..............................................................................................................6-4
6.1.5 CCA Update Message Number..............................................................................................................6-4
6.1.6 CCR Termination Message Number......................................................................................................6-5
6.1.7 CCA Termination Message Number......................................................................................................6-5
6.1.8 CCR Event Message Number................................................................................................................6-6
6.1.9 CCA Event Message Number................................................................................................................6-6
6.1.10 Number of Overloaded CCR Initial Messages.....................................................................................6-7
6.1.11 Number of Overloaded CCR Event Messages.....................................................................................6-7
6.1.12 Number of ASR Messages Sent by the CBP........................................................................................6-8
6.1.13 Number of ASA Messages Received by the CBP................................................................................6-9
6.1.14 Number of RAR Messages Sent by the CBP.......................................................................................6-9
6.1.15 Number of RAA Messages Received by the CBP.............................................................................6-10
6.1.16 CCR Message Number.......................................................................................................................6-10
6.1.17 CCA Message Number.......................................................................................................................6-11
6.1.18 CCR-CCA Check Balance.................................................................................................................6-11
6.2 Statistics of DCC Session Messages.............................................................................................................6-12
6.2.1 About Statistics of DCC Session Messages.........................................................................................6-13
6.2.2 Session Duration (0,1s]........................................................................................................................6-13
6.2.3 Session Duration (1,10s]......................................................................................................................6-13
6.2.4 Session Duration (10,60s]....................................................................................................................6-14
6.2.5 Session Duration (60,300s]..................................................................................................................6-15
6.2.6 Session Duration (300,600s]................................................................................................................6-15
6.2.7 Session Duration (600,3600s]..............................................................................................................6-16
6.2.8 Session Duration (3600,max]...............................................................................................................6-16
6.2.9 Session total number............................................................................................................................6-17
6.2.10 Number of Parsing Success................................................................................................................6-17
6.2.11 Number of Parsing Failure.................................................................................................................6-18
6.2.12 Number of In-Process Sessions..........................................................................................................6-18
6.2.13 Process Max Time..............................................................................................................................6-19
6.2.14 Total Processing Time........................................................................................................................6-19
6.2.15 OverLoad Message Number...............................................................................................................6-20
6.2.16 Message Delay Avg Time..................................................................................................................6-21
6.2.17 CAPS..................................................................................................................................................6-21
6.3 Statistics of DCC Message Delays................................................................................................................6-22
6.3.1 About Statistics of DCC Message Delays............................................................................................6-22
6.3.2 Processing Duration [0, 10 ms]............................................................................................................6-23
6.3.3 Processing Duration (10, 20ms]...........................................................................................................6-23
6.3.4 Processing Duration (20,50ms]............................................................................................................6-24

viii Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference Contents

6.3.5 Processing Duration (50,100ms]..........................................................................................................6-24


6.3.6 Processing Duration (100,200ms]........................................................................................................6-25
6.3.7 Processing Duration (200,1s]...............................................................................................................6-26
6.3.8 Processing Duration (1s,MAX)............................................................................................................6-26
6.3.9 Process Max Time................................................................................................................................6-27
6.3.10 Process Time Total.............................................................................................................................6-27
6.3.11 Total of Messages of a Type..............................................................................................................6-28
6.3.12 Average Processing Duration.............................................................................................................6-28
6.3.13 In-time Response Rate.......................................................................................................................6-29

7 The Performance Indexes of the DCCClient System .........................................................7-1


7.1 Statistics of DCCClient Messages...................................................................................................................7-2
7.1.1 About Statistics of DCCClient Messages...............................................................................................7-2
7.1.2 CCR Initial Message Number................................................................................................................7-2
7.1.3 CCA Initial Message Number................................................................................................................7-3
7.1.4 CCR Update Message Number..............................................................................................................7-3
7.1.5 CCA Update Message Number..............................................................................................................7-4
7.1.6 CCR Termination Message Number......................................................................................................7-5
7.1.7 CCA Termination Message Number......................................................................................................7-5
7.1.8 CCR Event Message Number................................................................................................................ 7-6
7.1.9 CCA Event Message Number................................................................................................................7-6
7.1.10 CCR Message Number.........................................................................................................................7-7
7.1.11 CCA Message Number.........................................................................................................................7-7
7.2 Statistics of DCCClient Sessions.................................................................................................................... 7-8
7.2.1 About Statistics of DCCClient Sessions................................................................................................ 7-9
7.2.2 Session Duration [0, 1s].........................................................................................................................7-9
7.2.3 Session Duration (1,10s]........................................................................................................................7-9
7.2.4 Session Duration (10,60s]....................................................................................................................7-10
7.2.5 Session Duration (60,300s]..................................................................................................................7-11
7.2.6 Session Duration (300,600s]................................................................................................................7-11
7.2.7 Session Duration (600,3600s]..............................................................................................................7-12
7.2.8 Session Duration (3600,max]...............................................................................................................7-12
7.2.9 Session total number............................................................................................................................7-13
7.2.10 Process success number.....................................................................................................................7-13
7.2.11 Process failed number........................................................................................................................7-14
7.2.12 Process Max Time..............................................................................................................................7-14
7.2.13 Process Time Total.............................................................................................................................7-15
7.2.14 Message Delay Avg Time..................................................................................................................7-15
7.2.15 CAPS..................................................................................................................................................7-16

8 The Performances Indexes of the Billing System................................................................8-1


8.1 Taking Statistics of the Processing Result...................................................................................................... 8-2
8.1.1 Overview................................................................................................................................................8-2
8.1.2 Measurement Items Contained...............................................................................................................8-2

Issue 01 (2011-02-26) Huawei Proprietary and Confidential ix


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Contents Performance Metrics Reference

8.1.3 DSP CDR Success Number....................................................................................................................8-2


8.1.4 DSP CDR Failed Number......................................................................................................................8-3
8.1.5 IMP CDR Success Number....................................................................................................................8-3
8.1.6 IMP CDR Failed Number......................................................................................................................8-4
8.1.7 CML CDR Success Number..................................................................................................................8-5
8.1.8 CML CDR Failed Number.....................................................................................................................8-5
8.1.9 BillCalc Success Number.......................................................................................................................8-6
8.1.10 BillCalc Failed Number.......................................................................................................................8-6
8.1.11 BillGen Success Number.....................................................................................................................8-7
8.1.12 BillGen Failed Number........................................................................................................................8-7
8.2 Taking Statistics of the IDL Request..............................................................................................................8-8
8.2.1 Overview................................................................................................................................................8-8
8.2.2 Measurement Items Contained...............................................................................................................8-8
8.2.3 Processing Time of an IDL Request in Hot Billing...............................................................................8-8
8.2.4 Processing Time of an IDL Request in Test Billing..............................................................................8-9

9 The Performances Indexes of the AR System.......................................................................9-1


9.1 Taking Statistics of the Process Time.............................................................................................................9-2
9.1.1 Overview................................................................................................................................................9-2
9.1.2 Measurement Items Contained...............................................................................................................9-2
9.1.3 Payment Time........................................................................................................................................9-2
9.1.4 Transfer Time.........................................................................................................................................9-3
9.1.5 Adjust Time............................................................................................................................................9-3
9.1.6 Deposit Time..........................................................................................................................................9-4
9.1.7 Charge Time...........................................................................................................................................9-4
9.1.8 Void Time..............................................................................................................................................9-5
9.1.9 Syn Balance Time..................................................................................................................................9-6

A Glossary.....................................................................................................................................A-1
A.1 Numerics........................................................................................................................................................A-2
A.2 A....................................................................................................................................................................A-2
A.3 B....................................................................................................................................................................A-3
A.4 C....................................................................................................................................................................A-3
A.5 D....................................................................................................................................................................A-5
A.6 E.....................................................................................................................................................................A-6
A.7 F.....................................................................................................................................................................A-6
A.8 G....................................................................................................................................................................A-6
A.9 H....................................................................................................................................................................A-6
A.10 I....................................................................................................................................................................A-7
A.11 J....................................................................................................................................................................A-7
A.12 L...................................................................................................................................................................A-7
A.13 M..................................................................................................................................................................A-7
A.14 N..................................................................................................................................................................A-8
A.15 O..................................................................................................................................................................A-8

x Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference Contents

A.16 P...................................................................................................................................................................A-8
A.17 R..................................................................................................................................................................A-9
A.18 S...................................................................................................................................................................A-9
A.19 T.................................................................................................................................................................A-10
A.20 U................................................................................................................................................................A-10
A.21 V................................................................................................................................................................A-11
A.22 W...............................................................................................................................................................A-11

Issue 01 (2011-02-26) Huawei Proprietary and Confidential xi


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 1 Performance Terms

1 Performance Terms

Measurement Index
The measurement index defines what to measure.
The measurement index is called measurement entity in Huawei Technologies Co., Ltd (hereafter
referred to as Huawei) Man-Machine Language (MML) specification.
The measurement index contains the name and unit of the measurement index.
One measurement index can belong to only one measurement unit.

Measurement Unit
For the management of great amount of measurement indexes of the system, the measurement
types can be classified into multiple measurement units. Each measurement unit contains
multiple measurement indexes related to one system function.

Measurement Object
The measurement object defines who to measure.
In the performance management, the measurement object refers to the entity or combination of
the physical or logical resource, such as the service key in the intelligent network and office
direction.

Granularity Period
The granularity period refers to the time interval between the successive two times of the
collection of performance data by the I2000 from the NE. The granularity period is called
measurement period in Huawei MML specification. The unit of the granularity period is minute.

Sampling Interval
Some measurement indexes need to be collected with a specified rate within a granularity period.
The time interval between the successive two times of collection is called sampling interval.
The sampling interval refers to the time interval of collecting the performance data on the internal
NEs. The sampling period equals to or less than the granularity period and is the divisor of the
granularity period.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 1-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
1 Performance Terms Performance Metrics Reference

For example, for the measurement of the CPU average usage rate, the granularity period is five
minutes, and the sampling period is one minute, which means that the system collects the CUP
usage every one minute. Thus, the CPU average usage rate is the average value of the five values
of CPU usage in five minutes.

Threshold Alarm
If the alarm threshold is set on the I2000, an alarm is generated when the measurement index
exceeds the threshold.

1-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 2 The Performance Indexes of the BME System

2 The Performance Indexes of the BME System

About This Chapter

2.1 Request Statistic of BME


2.2 Statistic of Message Delay

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 2-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
2 The Performance Indexes of the BME System Performance Metrics Reference

2.1 Request Statistic of BME

2.1.1 About Request Statistic of BME


2.1.2 Number of Concurrent Requests
2.1.3 Number of Received Requests
2.1.4 Number of Successful Requests
2.1.5 Number of Failed Requests
2.1.6 Number of In-Time Responses
2.1.7 Total Response Duration
2.1.8 Minimum Response Duration
2.1.9 Maximum Response Duration
2.1.10 Number of Requests Per Second
2.1.11 Response Avg Time
2.1.12 Request Success Rate
2.1.13 Response Betimes Rate

2.1.1 About Request Statistic of BME

Description
Statistics on requests sent from external systems to the BME.

Measurement Object
l Request Protocol
l Business Type

Granularity Period
900 seconds

Sampling Interval
300 seconds

2.1.2 Number of Concurrent Requests

Description
Number of requests that are being processed.

2-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 2 The Performance Indexes of the BME System

Unit
time

Measurement Point
The value is increased by 1 when the system receives a request. The number is decreased by 1
when the system gives a response.

Formula
ABS

Related Notes
l Valid value range of this measurement specification
The value ranges from 0 to 1000. The value is larger if the system is more idle. The
maximum number depends on the actual hardware configuration.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
The value is a negative number. When the system is busy, the vaule is a small number or
0.

2.1.3 Number of Received Requests


Description
Number of requests received by the system during the running period of a scheduled task. The
received requests may not be processed. The number of requests equals the number of processed
requests plus the number of unprocessed requests.

Unit
time

Measurement Point
The value is increased by 1 when the system receives a request.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 2-3


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
2 The Performance Indexes of the BME System Performance Metrics Reference

l Troubleshooting suggestions
None.

2.1.4 Number of Successful Requests

Description
Number of requests that are processed successfully in a running period of the scheduled task.

Unit
time

Measurement Point
The value is increased by 1 when the system successfully processes a request.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.1.5 Number of Failed Requests

Description
Number of requests that fail to be processed in a running period of the scheduled task.

Unit
time

Measurement Point
The value is increased by 1 when the system fails to process a request.

Formula
SUM

2-4 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 2 The Performance Indexes of the BME System

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.1.6 Number of In-Time Responses

Description
Duration threshold of a response. If the processing duration is shorter than this threshold, the
system considers that the response is processed in time; otherwise, the system considers that the
response is not processed in time.

Unit
time

Measurement Point
The value is increased by 1 when the system successfully processes a request within the duration
threshold.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.1.7 Total Response Duration

Description
Accumulated time spent in processing the requests during the running period of a scheduled
task.

Unit
millisecond

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 2-5


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
2 The Performance Indexes of the BME System Performance Metrics Reference

Measurement Point
After the system completes the processing of a request, the time spent in processing this request
is added to the total time.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.1.8 Minimum Response Duration

Description
Minimum time for processing a certain type of requests.

Unit
millisecond

Measurement Point
The system takes the processing duration as the minimum response duration if the former is
shorter than the latter.

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2-6 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 2 The Performance Indexes of the BME System

2.1.9 Maximum Response Duration


Description
Maximum time for processing a certain type of requests.

Unit
millisecond

Measurement Point
The system takes the processing duration as the maximum response duration if the former is
longer than the latter.

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.1.10 Number of Requests Per Second


Description
Number of requests processed by the system in a second.

Unit
time

Measurement Point
The number is increased by 1 when the system completes request processing.

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 2-7


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
2 The Performance Indexes of the BME System Performance Metrics Reference

l Whether to set the alarm threshold through the I2000


No.
l Troubleshooting suggestions
None.

2.1.11 Response Avg Time

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
millisecond

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Total Response Duration /( Number of Successful Requests + Number of Failed Requests )

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.1.12 Request Success Rate

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

2-8 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 2 The Performance Indexes of the BME System

Formula
Number of Successful Requests /( Number of Successful Requests + Number of Failed
Requests )*100

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.1.13 Response Betimes Rate


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of In-Time Responses /( Number of Successful Requests + Number of Failed Requests )
*100

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.2 Statistic of Message Delay

2.2.1 About Statistics of Message Delay


2.2.2 Request Number in [0,1s)

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 2-9


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
2 The Performance Indexes of the BME System Performance Metrics Reference

2.2.3 Request Number in [1,3s)


2.2.4 Request Number in [3,5s)
2.2.5 Request Number in [5,10s)
2.2.6 Request Number in [10,15s)
2.2.7 Request Number in [15,max)
2.2.8 Response Betimes Rate

2.2.1 About Statistics of Message Delay


Description
Statistics on the distribution of response time to external requests of the BME.

Measurement Object
l Request Protocol
l Request Business Type
l Request Device

Granularity Period
900 seconds

Sampling Interval
300 seconds

2.2.2 Request Number in [0,1s)


Description
Number of messages sent to reply to an external request in [0,1s).

Unit
item

Measurement Point
The value is increased by 1 when the message processing time is in [0,1s).

Formula
SUM

Related Notes
l Valid value range of this measurement specification

2-10 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 2 The Performance Indexes of the BME System

None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.2.3 Request Number in [1,3s)


Description
Number of messages sent to reply to an external request in [1,3s).

Unit
item

Measurement Point
The value is increased by 1 when the message processing time is in [1,3s).

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.2.4 Request Number in [3,5s)


Description
Number of messages sent to reply to an external request in [3,5s).

Unit
item

Measurement Point
The value is increased by 1 when the message processing time is in [3,5s).

Formula
SUM

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 2-11


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
2 The Performance Indexes of the BME System Performance Metrics Reference

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.2.5 Request Number in [5,10s)


Description
Number of messages sent to reply to an external request in [5,10s).

Unit
item

Measurement Point
The value is increased by 1 when the message processing time is in [5,10s).

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.2.6 Request Number in [10,15s)


Description
Number of messages sent to reply to an external request in [10,15s).

Unit
item

Measurement Point
The value is increased by 1 when the message processing time is in [10,15s).

2-12 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 2 The Performance Indexes of the BME System

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.2.7 Request Number in [15,max)


Description
Number of messages sent to reply to an external request in [15,max).

Unit
item

Measurement Point
The value is increased by 1 when the message processing time is in [15,max).

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2.2.8 Response Betimes Rate


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 2-13


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
2 The Performance Indexes of the BME System Performance Metrics Reference

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
100*(1- Request Number in [15,max) / ( Request Number in [0,1s) + Request Number in [1,3s)
+ Request Number in [3,5s) + Request Number in [5,10s) + Request Number in [10,15s)+
Request Number in [15,max)))

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

2-14 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 3 The Performance Indexes of the RCOMM System

3 The Performance Indexes of the RCOMM


System

About This Chapter

3.1 Statistics of RComm Messages

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 3-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
3 The Performance Indexes of the RCOMM System Performance Metrics Reference

3.1 Statistics of RComm Messages

3.1.1 About Statistics of RComm Messages


3.1.2 Number of Received Requests
3.1.3 Number of Concurrent Requests
3.1.4 Number of Successful Requests
3.1.5 Number of Failed Requests
3.1.6 Number of In-Time Responses
3.1.7 Request Success Rate
3.1.8 Response Betimes Rate

3.1.1 About Statistics of RComm Messages


Description
Statistics on RCOMM messages. The CBE supports the interaction through RCOMM messages,
that is, other NEs such as the FEP can send RCOMM request messages to the CBE.

Measurement Object
l Message Type
l Message Request Type

Granularity Period
900 seconds

Sampling Interval
300 seconds

3.1.2 Number of Received Requests


Description
Number of requests received by the system. The received requests may not be processed.

Unit
item

Measurement Point
The value is increased by 1 when the system receives a request.

3-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 3 The Performance Indexes of the RCOMM System

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

3.1.3 Number of Concurrent Requests

Description
Number of requests that are being processed.

Unit
item

Measurement Point
The value is increased by 1 when the system receives a request. The number is decreased by 1
when the system completes processing a request.

Formula
ABS

Related Notes
l Valid value range of this measurement specification
The value ranges from 0 to 1000. The value is larger if the system is more idle. The
maximum number depends on the actual hardware configuration.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

3.1.4 Number of Successful Requests

Description
Number of requests that are processed successfully.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 3-3


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
3 The Performance Indexes of the RCOMM System Performance Metrics Reference

Unit
item

Measurement Point
The value is increased by 1 when the system successfully processes a request.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

3.1.5 Number of Failed Requests

Description
Number of requests that fail to be processed.

Unit
item

Measurement Point
The value is increased by 1 when the system fails to process a request.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

3-4 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 3 The Performance Indexes of the RCOMM System

3.1.6 Number of In-Time Responses

Description
Time threshold (10 ms) set in the system. If the message response time reaches the threshold,
the response is not an in-time response.

Unit
item

Measurement Point
The value is increased by 1 if the processing duration of a request does not reach the threshold.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

3.1.7 Request Success Rate

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of Successful Requests / Number of Received Requests *100

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 3-5


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
3 The Performance Indexes of the RCOMM System Performance Metrics Reference

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

3.1.8 Response Betimes Rate


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of In-Time Responses / Request Total Number*100

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

3-6 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 4 The Performance Indexes of the CBEAgent System

4 The Performance Indexes of the CBEAgent


System

About This Chapter

4.1 CBEAgent Reverse Order Pending Business statistics

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 4-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
4 The Performance Indexes of the CBEAgent System Performance Metrics Reference

4.1 CBEAgent Reverse Order Pending Business statistics

4.1.1 Statistics on the Pending of CBEAgent Reverse Orders


4.1.2 Pending Reverse Order
4.1.3 Number of Reverse Orders Failed to Be Transferred
4.1.4 Number of Reverse Orders Successfully Transferred
4.1.5 Reverse Order Total Number
4.1.6 Reverse Order Error Rate

4.1.1 Statistics on the Pending of CBEAgent Reverse Orders

Description
Statistics on the pending of OCS reverse work orders.

Granularity Period
900 seconds

Sampling Interval
300 seconds

4.1.2 Pending Reverse Order

Description
Number of reverse orders that are pending in a measurement period. These orders are to be
deleted at the end of the period.

Unit
item

Measurement Point
Message stacking is monitored.

Formula
ABS

Related Notes
l Valid value range of this measurement specification

4-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 4 The Performance Indexes of the CBEAgent System

The normal range is [0, 10000]. The peak value of the number of stocked message is reached
when monthly settlement is performed at night. After the monthly settlement, the value is
gradually decreased.
l Whether to set the alarm threshold through the I2000
Yes.
l Troubleshooting suggestions
Perform a round inspection or check logs to determine whether an external system or the
processing of the reverse orders is abnormal.

4.1.3 Number of Reverse Orders Failed to Be Transferred

Description
Number of accumulated reverse orders that fail to be transferred. The number is decreased by 1
if an order fails to be transferred.

Unit
item

Measurement Point
In normal cases, the value remains unchanged.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

4.1.4 Number of Reverse Orders Successfully Transferred

Description
Number of accumulated reverse orders that are successfully transferred. The number is increased
by 1 if an order is transferred successfully.

Unit
item

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 4-3


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
4 The Performance Indexes of the CBEAgent System Performance Metrics Reference

Measurement Point
The increase cycle is regularly generated, but the daily variation curve is similar.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

4.1.5 Reverse Order Total Number

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
item

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of Reverse Orders Failed to Be Transferred + Number of Reverse Orders Successfully
Transferred

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

4-4 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 4 The Performance Indexes of the CBEAgent System

4.1.6 Reverse Order Error Rate


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of Reverse Orders Failed to Be Transferred / (Number of Reverse Orders Failed to Be
Transferred + Number of Reverse Orders Successfully Transferred)*100

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 4-5


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

5 The Performance Indexes of the PreMsg


System

About This Chapter

5.1 Statistics of PreMsg Result


5.2 Statistics of PreMsg Delay
5.3 Preprocessed bills statistics
5.4 Preprocessed bills deal statistics
5.5 Preprocessed bills deal time delay statistics
5.6 Statistics of Session
5.7 Statistics of Session delay
5.8 Statistics of unsuccessful Session

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

5.1 Statistics of PreMsg Result

5.1.1 About Statistics of PreMsg Result


5.1.2 Number of Successful Messages
5.1.3 Number of Failed Messages
5.1.4 Request Total Number
5.1.5 Request Success Rate

5.1.1 About Statistics of PreMsg Result

Description
Statistics on the processing result of DCC messages. The message processing is irrelevant to
services. For example, if a subscriber fails to make a call because the balance is insufficient, the
message processing is still successful.

Measurement Object
l Net Device
l Charging Event Type
l Message Request Type

Granularity Period
900 seconds

Sampling Interval
300 seconds

5.1.2 Number of Successful Messages

Description
Total number of messages that are successfully preprocessed.

Unit
item

Measurement Point
If a request succeeds, the value is increased by 1.

5-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.1.3 Number of Failed Messages


Description
Total number of messages that fail to be preprocessed.

Unit
item

Measurement Point
If a request fails, the value is increased by 1.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.1.4 Request Total Number


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
item

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-3


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of Successful Messages + Number of Failed Messages

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.1.5 Request Success Rate

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of Successful Messages /( Number of Successful Messages + Number of Failed
Messages )*100

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5-4 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

5.2 Statistics of PreMsg Delay

5.2.1 About Statistics of PreMsg Delay


5.2.2 Message Delay less than 10ms
5.2.3 Message Delay less than 20ms
5.2.4 Message Delay less than 50ms
5.2.5 Message Delay less than 100ms
5.2.6 Message Delay less than 200ms
5.2.7 Message Delay less than 1s
5.2.8 Message Delay more than 1s
5.2.9 Process Max Time
5.2.10 Process Time Total
5.2.11 Message Delay Total Time
5.2.12 Message Delay Avg Time
5.2.13 Response Betimes Rate

5.2.1 About Statistics of PreMsg Delay


Description
Statistics on time delays between the time when DCC messages start to be preprocessed and the
time when preprocessing results are returned.

Measurement Object
l Net Device
l Event type
l Message Request Type

Granularity Period
900 seconds

Sampling Interval
300 seconds

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-5


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

5.2.2 Message Delay less than 10ms


Description
Number of messages whose processing duration range is (0,10]. The unit is millisecond.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.2.3 Message Delay less than 20ms


Description
Number of messages whose processing duration range is (10,20]. The unit is millisecond.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000

5-6 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

No.
l Troubleshooting suggestions
None.

5.2.4 Message Delay less than 50ms

Description
Number of messages whose processing duration range is (20,50]. The unit is millisecond.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.2.5 Message Delay less than 100ms

Description
Number of messages whose processing duration range is (50,100]. The unit is millisecond.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-7


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.2.6 Message Delay less than 200ms


Description
Number of messages whose processing duration range is (100,200]. The unit is millisecond.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.2.7 Message Delay less than 1s


Description
Number of messages whose processing duration range is (200ms,1s].

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

5-8 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.2.8 Message Delay more than 1s


Description
Number of messages whose processing duration is longer than 1s.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.2.9 Process Max Time


Description
Maximum duration of processing a single message in a statistics period.

Unit
millisecond

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-9


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Measurement Point
Obtain the maximum duration of processing a message in a statistics period.

Formula
MAX

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.2.10 Process Time Total


Description
Total duration used for processing this type of messages.

Unit
millisecond

Measurement Point
Durations of message processing are accumulated.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.2.11 Message Delay Total Time


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

5-10 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

Unit
item

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Message Delay less than 10ms + Message Delay less than 20ms + Message Delay less than 50ms
+ Message Delay less than 100ms + Message Delay less than 200ms + Message Delay less than
1s + Message Delay more than 1s

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.2.12 Message Delay Avg Time


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
millisecond

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Process Time Total /( Message Delay less than 10ms + Message Delay less than 20ms + Message
Delay less than 50ms + Message Delay less than 100ms + Message Delay less than 200ms +
Message Delay less than 1s + Message Delay more than 1s)

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-11


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

No.
l Troubleshooting suggestions
None.

5.2.13 Response Betimes Rate

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
100-( Message Delay more than 1s/( Message Delay less than 10ms + Message Delay less than
20ms + Message Delay less than 50ms + Message Delay less than 100ms+ Message Delay less
than 200ms + Message Delay less than 1000ms+ Message Delay more than 1s)*100)

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.3 Preprocessed bills statistics

5.3.1 About Preprocessed Bills Statistics


5.3.2 Success CDR File Number
5.3.3 Repeated CDR File Number
5.3.4 Failed CDR File Number
5.3.5 Totle CDR File Number
5.3.6 Rate Of Dispatch Failed CDR File

5-12 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

5.3.1 About Preprocessed Bills Statistics


Description
Statistics on the processing of CDR files.

Granularity Period
900 seconds

Sampling Interval
300 seconds

5.3.2 Success CDR File Number


Description
Number of CDR files that are processed.

Unit
item

Measurement Point
The value is increased by 1 after a CDR file is processed.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.3.3 Repeated CDR File Number


Description
Number of CDR files that are processed repeatedly. The processing of repeated CDR files is not
considered a success or failure.

Unit
item

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-13


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Measurement Point
The value is increased by 1 after a repeated CDR file is detected.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.3.4 Failed CDR File Number

Description
Number of CDR files that fail to be processed. If a CDR fails to be processed, the processing of
the file that contains the CDR is considered as failed. If another CDR in the same file fails to be
processed, the failure is not counted repeatedly.

Unit
item

Measurement Point
The value is increased by 1 after a CDR file fails to be processed.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
Solve the problem according to the inspection and fault rectifying suggestions.

5-14 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

5.3.5 Totle CDR File Number

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
item

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Success CDR File Number + Repeat CDR File Number + Failed CDR File Number

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.3.6 Rate Of Dispatch Failed CDR File

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Failed CDR File Number /( Success CDR File Number + Repeat CDR File Number + Failed
CDR File Number )*100

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-15


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.4 Preprocessed bills deal statistics

5.4.1 About Preprocessed CDR Statistics


5.4.2 Number of Successful CDRs
5.4.3 Number of Failed CDRs
5.4.4 Number of total CDR
5.4.5 Rate of disposal failed CDR

5.4.1 About Preprocessed CDR Statistics

Description
Statistics on the processing of CDRs in a CDR file.

Measurement Object
l Net Device
l Event type

Granularity Period
900 seconds

Sampling Interval
300 seconds

5.4.2 Number of Successful CDRs

Description
Number of CDRs that are processed successfully.

Unit
item

5-16 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

Measurement Point
The value is increased by 1 after a CDR processing request is successfully processed.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.4.3 Number of Failed CDRs


Description
Number of CDRs that fail to be processed.

Unit
item

Measurement Point
The value is increased by 1 after a CDR processing request is received but fails to be processed.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.4.4 Number of total CDR


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-17


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Unit
item

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of successful CDR + Number of failed CDR

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.4.5 Rate of disposal failed CDR


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of failed CDR /( Number of successful CDR + Number of failed CDR )*100

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5-18 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

5.5 Preprocessed bills deal time delay statistics

5.5.1 About Preprocessed bills deal time delay statistics


5.5.2 Message Delay less than 10ms
5.5.3 Message Delay less than 20ms
5.5.4 Message Delay less than 50ms
5.5.5 Message Delay less than 100ms
5.5.6 Message Delay less than 200ms
5.5.7 Message Delay less than 1s
5.5.8 Message Delay more than 1s
5.5.9 Process Max Time
5.5.10 Process Time Total
5.5.11 Message Delay Avg Time
5.5.12 Response Betimes Rate

5.5.1 About Preprocessed bills deal time delay statistics

Description
Statistics on time for processing offline CDRs.

Measurement Object
l Net Device
l Event type

Granularity Period
900 seconds

Sampling Interval
300 seconds

5.5.2 Message Delay less than 10ms

Description
Number of messages whose processing duration range is (0,10]. The unit is millisecond.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-19


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.5.3 Message Delay less than 20ms

Description
Number of messages whose processing duration range is (10,20]. The unit is millisecond.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5-20 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

5.5.4 Message Delay less than 50ms


Description
Number of messages whose processing duration range is (20,50]. The unit is millisecond.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.5.5 Message Delay less than 100ms


Description
Number of messages whose processing duration range is (50,100]. The unit is millisecond.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-21


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

No.
l Troubleshooting suggestions
None.

5.5.6 Message Delay less than 200ms

Description
Number of messages whose processing duration range is (100,200]. The unit is millisecond.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.5.7 Message Delay less than 1s

Description
Number of messages whose processing duration range is (200ms,1s].

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

5-22 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.5.8 Message Delay more than 1s


Description
Number of messages whose processing duration is longer than 1s.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.5.9 Process Max Time


Description
Maximum duration of processing a single message in a statistics period.

Unit
millisecond

Measurement Point
Obtain the maximum duration of processing a message in a statistics period.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-23


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Formula
MAX

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.5.10 Process Time Total


Description
Total duration used for processing this type of messages.

Unit
millisecond

Measurement Point
Durations of message processing are accumulated.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.5.11 Message Delay Avg Time


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
millisecond

5-24 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Process Time Total /( Message Delay less than 10ms + Message Delay less than 20ms + Message
Delay less than 50ms + Message Delay less than 100ms + Message Delay less than 200ms +
Message Delay less than 1s+ Message Delay more than 1s)

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.5.12 Response Betimes Rate


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
100-(Message Delay more than 1s /( Message Delay less than 10ms + Message Delay less than
20ms + Message Delay less than 50ms + Message Delay less than 100ms + Message Delay less
than 200ms + Message Delay less than 1s + Message Delay more than 1s)*100)

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-25


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

5.6 Statistics of Session

5.6.1 About Statistics of Session


5.6.2 Number of Concurrent Sessions
5.6.3 Number of Timeout Sessions
5.6.4 Number of Sessions Where Charging Is Complete Successfully
5.6.5 Bill Failed session number
5.6.6 Request session total number
5.6.7 Request Success Rate
5.6.8 CAPS

5.6.1 About Statistics of Session


Description
Statistics on CBE sessions, including success rate, number of concurrent sessions, and number
of timeout sessions.

Measurement Object
l Net Device
l Event type

Granularity Period
900 seconds

Sampling Interval
300 seconds

5.6.2 Number of Concurrent Sessions


Description
Indicates the number of sessions that are being processed at the same time.

Unit
item

Measurement Point
After a request is received, the value is increased by 1. After a request is processed, the value is
decreased by 1.

5-26 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.6.3 Number of Timeout Sessions


Description
Number of sessions whose processing times out.

Unit
item

Measurement Point
The value is increased by 1 if the processing of a session times out.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.6.4 Number of Sessions Where Charging Is Complete


Successfully
Description
Indicates the number of sessions that exit normally and where charging is complete successfully.

Unit
item

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-27


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Measurement Point
After a session is processed, the value is increased by 1.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.6.5 Bill Failed session number


Description
Indicates the number of sessions that exit abnormally or where charging failed.

Unit
item

Measurement Point
After a session failed to be processed, the value is increased by 1.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.6.6 Request session total number


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

5-28 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

Unit
item

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of Sessions Where Charging Is Complete Successfully + Bill Failed session number

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.6.7 Request Success Rate


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Number of Sessions Where Charging Is Complete Successfully /( Number of Sessions Where
Charging Is Complete Successfully + Bill Failed session number )*100

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-29


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

None.

5.6.8 CAPS
Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
Call attempt/second

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
( Number of Sessions Where Charging Is Complete Successfully + Bill Failed session number) /
SampleInterval

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.7 Statistics of Session delay

5.7.1 About Statistics of Session Delay


5.7.2 Session Delay less than 1s
5.7.3 Session Delay less than 10s
5.7.4 Session Delay less than 60s
5.7.5 Session Delay less than 300s
5.7.6 Session Delay less than 600s
5.7.7 Session Delay less than 3600s
5.7.8 Session Delay more than 3600s
5.7.9 Process Max Time
5.7.10 Process Time Total

5-30 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

5.7.11 Response Avg Time

5.7.1 About Statistics of Session Delay

Description
Message-level statistics on management messages according to the source event type.

Measurement Object
l Net Device
l Event type

Granularity Period
900 seconds

Sampling Interval
300 seconds

5.7.2 Session Delay less than 1s

Description
Number of calls whose session duration range is (0,1]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-31


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

5.7.3 Session Delay less than 10s


Description
Number of calls whose session duration range is (1,10]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.7.4 Session Delay less than 60s


Description
Number of calls whose session duration range is (10,60]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000

5-32 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

No.
l Troubleshooting suggestions
None.

5.7.5 Session Delay less than 300s

Description
Number of calls whose session duration range is (60,300]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.7.6 Session Delay less than 600s

Description
Number of calls whose session duration range is (300,600]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-33


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.7.7 Session Delay less than 3600s


Description
Number of calls whose session duration range is (600,3600]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.7.8 Session Delay more than 3600s


Description
Number of calls whose session duration is greater than 3600 seconds.

Unit
item

Measurement Point
The value is increased by 1 if the duration of processing a message is in this range.

5-34 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.7.9 Process Max Time


Description
Maximum duration of processing a single message in a statistics period.

Unit
millisecond

Measurement Point
Obtain the maximum duration of processing a single message in a statistics period.

Formula
MAX

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.7.10 Process Time Total


Description
Total duration used for processing this type of messages.

Unit
millisecond

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-35


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

Measurement Point
Durations of message processing are accumulated.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5.7.11 Response Avg Time

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
millisecond

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Process Time Total /( Session Delay less than 1s + Session Delay less than 10s + Session Delay
less than 60s + Session Delay less than 300s + Session Delay less than 600s+ Session Delay less
than 3600s + Session Delay more than 3600s )

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5-36 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 5 The Performance Indexes of the PreMsg System

5.8 Statistics of unsuccessful Session

5.8.1 About Statistics of Unsuccessful Sessions


5.8.2 Unsuccessful Number

5.8.1 About Statistics of Unsuccessful Sessions

Description
Statistics on failure causes according to result codes returned from external systems in the
Diameter-based communications between the CBE and other systems.

Measurement Object
l Net Device
l Event type
l Return error code

Granularity Period
900 seconds

Sampling Interval
300 seconds

5.8.2 Unsuccessful Number

Description
Number of sessions that fail to be processed.

Unit
item

Measurement Point
The value is increased by 1 if a session fails to be processed.

Formula
SUM

Related Notes
l Valid value range of this measurement specification

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 5-37


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
5 The Performance Indexes of the PreMsg System Performance Metrics Reference

None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

5-38 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

6 The Performance Indexes of the


DCCAdapter System

About This Chapter

6.1 Statistics of DCC Messages


6.2 Statistics of DCC Session Messages
6.3 Statistics of DCC Message Delays

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

6.1 Statistics of DCC Messages

6.1.1 About Statistics of DCC Messages


6.1.2 CCR Initial Message Number
6.1.3 CCA Initial Message Number
6.1.4 CCR Update Message Number
6.1.5 CCA Update Message Number
6.1.6 CCR Termination Message Number
6.1.7 CCA Termination Message Number
6.1.8 CCR Event Message Number
6.1.9 CCA Event Message Number
6.1.10 Number of Overloaded CCR Initial Messages
6.1.11 Number of Overloaded CCR Event Messages
6.1.12 Number of ASR Messages Sent by the CBP
6.1.13 Number of ASA Messages Received by the CBP
6.1.14 Number of RAR Messages Sent by the CBP
6.1.15 Number of RAA Messages Received by the CBP
6.1.16 CCR Message Number
6.1.17 CCA Message Number
6.1.18 CCR-CCA Check Balance

6.1.1 About Statistics of DCC Messages


Description
Statistics on the balance of DCC message receiving and sending.

Measurement Object
l Event type
l Net Device

Granularity Period
900 seconds

Sampling Interval
300 seconds

6-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

6.1.2 CCR Initial Message Number


Description
Number of CCR Initial messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCR Initial message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.3 CCA Initial Message Number


Description
Number of CCA Initial messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCA Initial message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-3


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

No.
l Troubleshooting suggestions
None.

6.1.4 CCR Update Message Number

Description
Number of CCR Update messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCR Update message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.5 CCA Update Message Number

Description
Number of CCA Update messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCA Update message is received.

Formula
SUM

6-4 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.6 CCR Termination Message Number


Description
Number of CCR Termination messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCR Termination message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.7 CCA Termination Message Number


Description
Number of CCA Termination messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCA Termination is received.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-5


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.8 CCR Event Message Number


Description
Number of CCR Event messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCR Event message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.9 CCA Event Message Number


Description
Number of CCA Event messages.

Unit
item

6-6 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

Measurement Point
The value is increased by 1 after a CCA Event message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.10 Number of Overloaded CCR Initial Messages


Description
Number of overloaded CCR Initial messages.

Unit
item

Measurement Point
Collect the number of CCR Initial messages that are rejected by the system in an overload.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.11 Number of Overloaded CCR Event Messages


Description
Number of overloaded CCR Event messages.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-7


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

Unit
item

Measurement Point
Collect the number of CCR Event messages that are rejected by the system in an overload.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.12 Number of ASR Messages Sent by the CBP

Description
Number of ASR messages sent by the CBP.

Unit
item

Measurement Point
The value is increased by one after the CBP sends an ASR message.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6-8 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

6.1.13 Number of ASA Messages Received by the CBP


Description
Number of ASA messages received by the CBP.

Unit
item

Measurement Point
The value is increased by one after the CBP receives an ASA message.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.14 Number of RAR Messages Sent by the CBP


Description
Number of RAR messages sent by the CBP.

Unit
item

Measurement Point
The value is increased by one after the CBP sends a RAR message.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-9


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

No.
l Troubleshooting suggestions
None.

6.1.15 Number of RAA Messages Received by the CBP


Description
Number of RAA messages received by the CBP.

Unit
item

Measurement Point
The value is increased by one after the CBP receives a RAA message.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.16 CCR Message Number


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
item

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
CCR Initial Message Number + CCR Update Message Number + CCR Termination Message
Number + CCR Event Message Number

6-10 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.17 CCA Message Number

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
item

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
CCA Initial Message Number + CCA Update Message Number + CCA Termination Message
Number + CCA Event Message Number

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.1.18 CCR-CCA Check Balance

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
item

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-11


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
( CCR Initial Message Number + CCR Update Message Number + CCR Termination Message
Number + CCR Event Message Number )-( CCA Initial Message Number + CCA Update
Message Number + CCA Termination Message Number + CCA Event Message Number )

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2 Statistics of DCC Session Messages

6.2.1 About Statistics of DCC Session Messages


6.2.2 Session Duration (0,1s]
6.2.3 Session Duration (1,10s]
6.2.4 Session Duration (10,60s]
6.2.5 Session Duration (60,300s]
6.2.6 Session Duration (300,600s]
6.2.7 Session Duration (600,3600s]
6.2.8 Session Duration (3600,max]
6.2.9 Session total number
6.2.10 Number of Parsing Success
6.2.11 Number of Parsing Failure
6.2.12 Number of In-Process Sessions
6.2.13 Process Max Time
6.2.14 Total Processing Time
6.2.15 OverLoad Message Number
6.2.16 Message Delay Avg Time
6.2.17 CAPS

6-12 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

6.2.1 About Statistics of DCC Session Messages


Description
Statistics on the duration of processing Diameter messages by the CBE.

Measurement Object
l Event type
l Net Device

Granularity Period
900 seconds

Sampling Interval
300 seconds

6.2.2 Session Duration (0,1s]


Description
Number of calls whose session duration range is (0,1]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.3 Session Duration (1,10s]


Description
Number of calls whose session duration range is (1,10]. The unit is second.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-13


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.4 Session Duration (10,60s]

Description
Number of calls whose session duration range is (10,60]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6-14 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

6.2.5 Session Duration (60,300s]


Description
Number of calls whose session duration range is (60,300]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.6 Session Duration (300,600s]


Description
Number of calls whose session duration range is (300,600]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-15


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

No.
l Troubleshooting suggestions
None.

6.2.7 Session Duration (600,3600s]

Description
Number of calls whose session duration range is (600,3600]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.8 Session Duration (3600,max]

Description
Number of calls whose session duration is greater than 3600 seconds.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

6-16 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.9 Session total number


Description
Number of created DCC sessions.

Unit
item

Measurement Point
The value is increased by 1 after a session is created.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.10 Number of Parsing Success


Description
Number of sessions that are parsed successfully.

Unit
item

Measurement Point
The value is increased by 1 after each successful parsing.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-17


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.11 Number of Parsing Failure


Description
Number of sessions whose format or content is incorrect.

Unit
item

Measurement Point
The value is increased by 1 after each failed parsing.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.12 Number of In-Process Sessions


Description
Number of sessions that are being processed.

Unit
item

6-18 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

Measurement Point
The value is increased by 1 after a session is created and is decreased by 1 after a session is
released.

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.13 Process Max Time


Description
Maximum duration of processing a session.

Unit
millisecond

Measurement Point
Obtain the maximum duration of processing a single session in a statistics period.

Formula
MAX

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.14 Total Processing Time


Description
Total duration of processing sessions.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-19


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

Unit
millisecond

Measurement Point
Obtain the duration of processing all sessions.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.15 OverLoad Message Number

Description
Number of messages that are discarded due to overload.

Unit
item

Measurement Point
The value is increased by 1 after a message is discarded in system overload.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6-20 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

6.2.16 Message Delay Avg Time


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
millisecond

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Process Time Total /( Session Duration [0,1s] + Session Duration (1,10s] + Session Duration
(10,60s] + Session Duration (10,60s] + Session Duration (300,600s] + Session Duration
(600,3600s] + Session Duration (3600,max] )

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.2.17 CAPS
Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
Call attempt/second

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Session total number /SampleInterval

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-21


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.3 Statistics of DCC Message Delays

6.3.1 About Statistics of DCC Message Delays


6.3.2 Processing Duration [0, 10 ms]
6.3.3 Processing Duration (10, 20ms]
6.3.4 Processing Duration (20,50ms]
6.3.5 Processing Duration (50,100ms]
6.3.6 Processing Duration (100,200ms]
6.3.7 Processing Duration (200,1s]
6.3.8 Processing Duration (1s,MAX)
6.3.9 Process Max Time
6.3.10 Process Time Total
6.3.11 Total of Messages of a Type
6.3.12 Average Processing Duration
6.3.13 In-time Response Rate

6.3.1 About Statistics of DCC Message Delays


Description
Statistics on time delays between the time when DCC messages start to be preprocessed and the
time when preprocessing results are returned.

Measurement Object
l Net device
l Event type
l Request type

Granularity Period
900 seconds

6-22 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

Sampling Interval
300 seconds

6.3.2 Processing Duration [0, 10 ms]

Description
The duration range of processing all messages is [0, 10 ms].

Unit
item

Measurement Point
When the processing duration is in [0, 10 ms], the value of the processing duration is increased
by 1.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
No
l Troubleshooting suggestions
None

6.3.3 Processing Duration (10, 20ms]

Description
The duration range of processing all messages is (10,20ms].

Unit
item

Measurement Point
When the processing duration is in (10, 20ms], the value of the processing duration is increased
by 1.

Formula
SUM

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-23


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.3.4 Processing Duration (20,50ms]

Description
The duration range of processing all messages is (20,50ms].

Unit
item

Measurement Point
When the processing duration is in (20,50ms], the value of the processing duration is increased
by 1.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.3.5 Processing Duration (50,100ms]

Description
The duration range of processing all messages is (50,100ms].

Unit
item

6-24 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

Measurement Point
When the processing duration is in (50,100ms], the value of the processing duration is increased
by 1.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.3.6 Processing Duration (100,200ms]

Description
The duration range of processing all messages is (100,200ms].

Unit
item

Measurement Point
When the processing duration is in (100,200ms], the value of the processing duration is increased
by 1.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-25


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

6.3.7 Processing Duration (200,1s]


Description
The duration range of processing all messages is (200,1s].

Unit
item

Measurement Point
When the processing duration is in (200,1s], the value of the processing duration is increased
by 1.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.3.8 Processing Duration (1s,MAX)


Description
The duration range of processing all messages is (1s,MAX).

Unit
item

Measurement Point
When the processing duration is in (1s,MAX), the value of the processing duration is increased
by 1.

Formula
SUM

Related Notes
l Valid value range of this measurement specification

6-26 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.3.9 Process Max Time


Description
Maximum duration of processing a single message in a statistics period.

Unit
millisecond

Measurement Point
Maximum value in an interval.

Formula
MAX

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
No
l Troubleshooting suggestions
None

6.3.10 Process Time Total


Description
Total processing duration of messages of a type.

Unit
millisecond

Measurement Point
Processing time accumulation.

Formula
SUM

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-27


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
6 The Performance Indexes of the DCCAdapter System Performance Metrics Reference

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
No
l Troubleshooting suggestions
None

6.3.11 Total of Messages of a Type


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
time

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Processing Duration [0,10ms] + Processing Duration (10,20ms] + Processing Duration
(20,50ms] + Processing Duration (50,100ms] + Processing Duration (100,200ms] + Processing
Duration (200,1s] + Processing Duration (1s,MAX)

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.3.12 Average Processing Duration


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
millisecond

6-28 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 6 The Performance Indexes of the DCCAdapter System

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Process Time Total / ( Processing Duration [0,10ms] + Processing Duration (10,20ms] +
Processing Duration (20,50ms] + Processing Duration (50,100ms] + Processing Duration
(100,200ms] + Processing Duration (200,1s] + Processing Duration (1s,MAX) )

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

6.3.13 In-time Response Rate


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
%

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
100 - ( Processing Duration (1s,MAX) / ( Processing Duration [0,10ms] + Processing Duration
(10,20ms] + Processing Duration (20,50ms] + Processing Duration (50,100ms] + Processing
Duration (100,200ms] + Processing Duration (200,1s] + Processing Duration (1s,MAX) ) * 100 )

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 6-29


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 7 The Performance Indexes of the DCCClient System

7 The Performance Indexes of the DCCClient


System

About This Chapter

7.1 Statistics of DCCClient Messages


7.2 Statistics of DCCClient Sessions

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 7-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
7 The Performance Indexes of the DCCClient System Performance Metrics Reference

7.1 Statistics of DCCClient Messages

7.1.1 About Statistics of DCCClient Messages


7.1.2 CCR Initial Message Number
7.1.3 CCA Initial Message Number
7.1.4 CCR Update Message Number
7.1.5 CCA Update Message Number
7.1.6 CCR Termination Message Number
7.1.7 CCA Termination Message Number
7.1.8 CCR Event Message Number
7.1.9 CCA Event Message Number
7.1.10 CCR Message Number
7.1.11 CCA Message Number

7.1.1 About Statistics of DCCClient Messages


Description
Statistics on the balance of DCC message receiving and sending.

Measurement Object
l Event Type
l Net Device

Granularity Period
900 seconds

Sampling Interval
300 seconds

7.1.2 CCR Initial Message Number


Description
Number of CCR Initial messages.

Unit
item

7-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 7 The Performance Indexes of the DCCClient System

Measurement Point
The value is increased by 1 after a CCR Initial message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.1.3 CCA Initial Message Number


Description
Number of CCA Initial messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCA Initial message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.1.4 CCR Update Message Number


Description
Number of CCR Update messages.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 7-3


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
7 The Performance Indexes of the DCCClient System Performance Metrics Reference

Unit
item

Measurement Point
The value is increased by 1 after a CCR Update message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.1.5 CCA Update Message Number

Description
Number of CCA Update messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCA Update message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7-4 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 7 The Performance Indexes of the DCCClient System

7.1.6 CCR Termination Message Number


Description
Number of CCR Termination messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCR Termination message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.1.7 CCA Termination Message Number


Description
Number of CCA Termination messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCA Termination is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 7-5


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
7 The Performance Indexes of the DCCClient System Performance Metrics Reference

No.
l Troubleshooting suggestions
None.

7.1.8 CCR Event Message Number

Description
Number of CCR Event messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCR Event message is received.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.1.9 CCA Event Message Number

Description
Number of CCA Event messages.

Unit
item

Measurement Point
The value is increased by 1 after a CCA Event message is received.

Formula
SUM

7-6 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 7 The Performance Indexes of the DCCClient System

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.1.10 CCR Message Number

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
item

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
CCR Initial Message Number + CCR Update Message Number + CCR Termination Message
Number + CCR Event Message Number

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.1.11 CCA Message Number

Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
item

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 7-7


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
7 The Performance Indexes of the DCCClient System Performance Metrics Reference

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
CCA Initial Message Number + CCA Update Message Number + CCA Termination Message
Number + CCA Event Message Number

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2 Statistics of DCCClient Sessions

7.2.1 About Statistics of DCCClient Sessions


7.2.2 Session Duration [0, 1s]
7.2.3 Session Duration (1,10s]
7.2.4 Session Duration (10,60s]
7.2.5 Session Duration (60,300s]
7.2.6 Session Duration (300,600s]
7.2.7 Session Duration (600,3600s]
7.2.8 Session Duration (3600,max]
7.2.9 Session total number
7.2.10 Process success number
7.2.11 Process failed number
7.2.12 Process Max Time
7.2.13 Process Time Total
7.2.14 Message Delay Avg Time
7.2.15 CAPS

7-8 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 7 The Performance Indexes of the DCCClient System

7.2.1 About Statistics of DCCClient Sessions


Description
Statistics on the duration of processing Diameter messages by the CBE.

Measurement Object
l Event type
l Net Device

Granularity Period
900 seconds

Sampling Interval
300 seconds

7.2.2 Session Duration [0, 1s]


Description
Number of calls whose session duration range is (0,1]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.3 Session Duration (1,10s]


Description
Number of calls whose session duration range is (1,10]. The unit is second.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 7-9


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
7 The Performance Indexes of the DCCClient System Performance Metrics Reference

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.4 Session Duration (10,60s]

Description
Number of calls whose session duration range is (10,60]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7-10 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 7 The Performance Indexes of the DCCClient System

7.2.5 Session Duration (60,300s]


Description
Number of calls whose session duration range is (60,300]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.6 Session Duration (300,600s]


Description
Number of calls whose session duration range is (300,600]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 7-11


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
7 The Performance Indexes of the DCCClient System Performance Metrics Reference

No.
l Troubleshooting suggestions
None.

7.2.7 Session Duration (600,3600s]

Description
Number of calls whose session duration range is (600,3600]. The unit is second.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.8 Session Duration (3600,max]

Description
Number of sessions whose duration is greater than 3600s.

Unit
item

Measurement Point
The value is increased by 1 if the duration of a session is in this range.

Formula
SUM

7-12 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 7 The Performance Indexes of the DCCClient System

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.9 Session total number


Description
Number of created DCC sessions.

Unit
item

Measurement Point
The value is increased by 1 after a session is created.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.10 Process success number


Description
Number of sessions that are parsed successfully.

Unit
item

Measurement Point
The value is increased by 1 after each successful parsing.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 7-13


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
7 The Performance Indexes of the DCCClient System Performance Metrics Reference

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.11 Process failed number


Description
Number of sessions whose format or content is incorrect.

Unit
item

Measurement Point
The value is increased by 1 after each failed parsing.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.12 Process Max Time


Description
Maximum duration of processing a session.

Unit
millisecond

7-14 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 7 The Performance Indexes of the DCCClient System

Measurement Point
Obtain the maximum duration of processing a single session in a statistics period.

Formula
MAX

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.13 Process Time Total


Description
Total duration of processing sessions.

Unit
millisecond

Measurement Point
Obtain the duration of processing all sessions.

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.14 Message Delay Avg Time


Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 7-15


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
7 The Performance Indexes of the DCCClient System Performance Metrics Reference

Unit
millisecond

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Process Time Total / ( Session Duration [0, 1s] + Session Duration (1,10s] + Session Duration
(10,60s] + Session Duration (60,300s] + Session Duration (300,600s] + Session Duration
(600,3600s] + Session Duration (3600,max] )

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.
l Troubleshooting suggestions
None.

7.2.15 CAPS
Description
For the definition of this performance indicator, see the definitions of all the performance
indicators in the calculation formula.

Unit
Call attempt/second

Measurement Point
For the measure point of this performance indicator, see the measure points of all the performance
indicators in the calculation formula.

Formula
Session total number /SampleInterval

Related Notes
l Valid value range of this measurement specification
None.
l Whether to set the alarm threshold through the I2000
No.

7-16 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 7 The Performance Indexes of the DCCClient System

l Troubleshooting suggestions
None.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 7-17


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 8 The Performances Indexes of the Billing System

8 The Performances Indexes of the Billing


System

About This Chapter

8.1 Taking Statistics of the Processing Result


This section describes the meaning, measurement object, recommended granularity period,
sampling interval, and measurement point regarding the statistics of the processing result.
8.2 Taking Statistics of the IDL Request
This section describes the meaning, measurement object, recommended granularity period,
sampling interval, and measurement point regarding the statistics of the IDL request.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 8-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
8 The Performances Indexes of the Billing System Performance Metrics Reference

8.1 Taking Statistics of the Processing Result


This section describes the meaning, measurement object, recommended granularity period,
sampling interval, and measurement point regarding the statistics of the processing result.

8.1.1 Overview

Description
The measurement items of the take statistics of the process result.

Measurement Object
None

Recommended Granularity Period


The recommended granularity period is 15 minutes.

Sampling Interval
The sampling interval is 5 minutes.

8.1.2 Measurement Items Contained


l Processing Time of an IDL Request in Hot Billing
l DSP CDR Failed Number
l IMP CDR Success Number
l IMP CDR Failed Number
l CML CDR Success Number
l CML CDR Failed Number
l BillCalc Success Number
l BillCalc Failed Number
l BillGen Success Number
l BillGen Failed Number

8.1.3 DSP CDR Success Number

Description
This item indicates the total number of DSP CDR success in a period.

Unit
Item

8-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 8 The Performances Indexes of the Billing System

Measurement Point
None

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8.1.4 DSP CDR Failed Number


Description
This item indicates the total number of DSP CDR failed in a period.

Unit
Item

Measurement Point
None

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8.1.5 IMP CDR Success Number


Description
This item indicates the total number of IMP CDR success in a period.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 8-3


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
8 The Performances Indexes of the Billing System Performance Metrics Reference

Unit
Item

Measurement Point
None

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8.1.6 IMP CDR Failed Number

Description
This item indicates the total number of IMP CDR failed in a period.

Unit
Item

Measurement Point
None

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8-4 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 8 The Performances Indexes of the Billing System

8.1.7 CML CDR Success Number

Description
This item indicates the total number of CML CDR success in a period.

Unit
Item

Measurement Point
None

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8.1.8 CML CDR Failed Number

Description
This item indicates the total number of CML CDR failed in a period.

Unit
Item

Measurement Point
None

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 8-5


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
8 The Performances Indexes of the Billing System Performance Metrics Reference

l Whether to set the alarm threshold through the I2000


FALSE
l Troubleshooting suggestions
None

8.1.9 BillCalc Success Number


Description
This item indicates the total number of BillCalc success in a period.

Unit
Item

Measurement Point
None

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8.1.10 BillCalc Failed Number


Description
This item indicates the total number of BillCalc failed in a period.

Unit
Item

Measurement Point
None

Formula
ABS

8-6 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 8 The Performances Indexes of the Billing System

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8.1.11 BillGen Success Number


Description
This item indicates the total number that the bill generated success in a period.

Unit
Item

Measurement Point
None

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8.1.12 BillGen Failed Number


Description
This item indicates the total number that the bill generated failed in a period.

Unit
Item

Measurement Point
None

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 8-7


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
8 The Performances Indexes of the Billing System Performance Metrics Reference

Formula
ABS

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8.2 Taking Statistics of the IDL Request


This section describes the meaning, measurement object, recommended granularity period,
sampling interval, and measurement point regarding the statistics of the IDL request.

8.2.1 Overview

Description
The measurement items of the take statistics of the IDL request from Billing to CBP.

Measurement Object
None

Recommended Granularity Period


The recommended granularity period is 15 minutes.

Sampling Interval
The sampling interval is 5 minutes.

8.2.2 Measurement Items Contained


l 8.2.3 Processing Time of an IDL Request in Hot Billing
l 8.2.4 Processing Time of an IDL Request in Test Billing

8.2.3 Processing Time of an IDL Request in Hot Billing

Description
This item indicates the time for responding to and processing a hot billing request sent by the
Billing to the CBP through an IDL message.

8-8 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 8 The Performances Indexes of the Billing System

Unit
Millisecond

Measurement Point
None

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

8.2.4 Processing Time of an IDL Request in Test Billing

Description
This item indicates the time for responding to and processing a test billing request sent by the
Billing to the CBP through an IDL message.

Unit
Millisecond

Measurement Point
None

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 8-9


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 9 The Performances Indexes of the AR System

9 The Performances Indexes of the AR System

About This Chapter

9.1 Taking Statistics of the Process Time


This section describes the meaning, measurement object, recommended granularity period,
sampling interval, and measurement point regarding the statistics of the process time.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 9-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
9 The Performances Indexes of the AR System Performance Metrics Reference

9.1 Taking Statistics of the Process Time


This section describes the meaning, measurement object, recommended granularity period,
sampling interval, and measurement point regarding the statistics of the process time.

9.1.1 Overview

Description
The measurement items of the take statistics of the process time.

Measurement Object
None

Recommended Granularity Period


The recommended granularity period is 15 minutes.

Sampling Interval
The sampling interval is 5 minutes.

9.1.2 Measurement Items Contained


l 9.1.3 Payment Time
l 9.1.4 Transfer Time
l 9.1.5 Adjust Time
l 9.1.6 Deposit Time
l 9.1.8 Void Time
l 9.1.9 Syn Balance Time

9.1.3 Payment Time

Description
This item indicates the total time of the payment.

Unit
Millisecond

Measurement Point
None

9-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 9 The Performances Indexes of the AR System

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

9.1.4 Transfer Time


Description
This item indicates the total time of the transfer.

Unit
Millisecond

Measurement Point
None

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

9.1.5 Adjust Time


Description
This item indicates the total time of the adjust.

Unit
Millisecond

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 9-3


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
9 The Performances Indexes of the AR System Performance Metrics Reference

Measurement Point
None

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

9.1.6 Deposit Time


Description
This item indicates the total time of the deposit.

Unit
Millisecond

Measurement Point
None

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

9.1.7 Charge Time


Description
This item indicates the total time of the charge.

9-4 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference 9 The Performances Indexes of the AR System

Unit
Millisecond

Measurement Point
None

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

9.1.8 Void Time

Description
This item indicates the total time of the void.

Unit
Millisecond

Measurement Point
None

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

Issue 01 (2011-02-26) Huawei Proprietary and Confidential 9-5


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
9 The Performances Indexes of the AR System Performance Metrics Reference

9.1.9 Syn Balance Time


Description
This item indicates the total time of the Synchro balance.

Unit
Millisecond

Measurement Point
None

Formula
SUM

Related Notes
l Valid value range of this measurement specification
None
l Whether to set the alarm threshold through the I2000
FALSE
l Troubleshooting suggestions
None

9-6 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference A Glossary

A Glossary

Lists all terms, acronyms, and abbreviations used in the CBS for your reference.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential A-1


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
A Glossary Performance Metrics Reference

A.1 Numerics
3G Third Generation Mobile Communication

A.2 A
AAA Authentication, Authorization and Accounting
AC Apply Charging
account An entity through which a customer can pay for the telecommunications services
provided by a carrier.
account accumulation A process of accumulating the fees of a CDR to relevant account items according to
different fee types.
account adjustment A process to adjust account items on which the two parties of a settlement cannot benefit
equally.
account adjustment A process to adjust account items on which the two parties of a settlement cannot benefit
equally.
account book A book that records the information about the income and expense of each fee item in
the account by class. An account matches one or more account books. An account book
often records the information such as account number, bill cycle, and account book
subject.
Account Receivable Any amount owed to a business as the result of a purchase of goods or services from it
on a credit basis. Although the firm making the sale receives no written promise of
payment, it enters the amount due as a current asset in its books.
accumulator The accumulation of the service usage, consumption, and recharge fees of a subscriber.
ACK Acknowledgement
ACR Apply Charging Report
activation An operation that enables a subscriber to use different telecommunications services
provided by a carrier. After being activated, a subscriber account enters the active period,
and the state of the subscriber is Active.
admission limit The minimum consumption amount that a carrier sets for a subscriber in a bill cycle. If
the consumption amount of a subscriber does not reach the minimum consumption
amount that the carrier sets, the OCS system deducts the minimum consumption amount
that the carrier sets.
advance payment A fee that is paid by a customer in advance when the customer is not in arrears.
AOD Arrangement of Debt
APN Access Point Name
appendant product A type of products that are set by carriers, apart from main products. In general, an
appendant product includes value-added services or preferential tariffs.
AR See Account Receivable
AVP Attribute Value Pairs

A-2 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference A Glossary

A.3 B
bad debt The account item and amount that cannot be collected and are approved by a superior
department after the loss report.
barring A specific state in the life cycle of a subscriber. A subscriber in this state can only answer
calls, but subscriber can call the phone of customer service.
bill A list through which a carrier provides the service fee information periodically for a
subscriber. A bill records the information such as the final balance and the fees for using
the services and products. Bills are classified into detail bills and summary bills. A carrier
charges a subscriber according to the information on the bill.
bill cycle Settlement cycle. The interval can be set according to the operation strategy of a carrier
and is one month in general. When a bill cycle ends, the OCS calculates the fees that a
subscriber needs to pay in the bill cycle and generates a bill.
bill cycle type A property of the bill cycle and account. Every bill cycle type has a unique cutoff day
in each month. Every account must calculated on the cutoff day of every month.
bill description The information about the bill item section and each bill item name on the paper bill.
bill insert The information that is displayed in the middle of a paper bill for attracting the attention
and stimulating the consumption of a customer.
bill item The description of the fee item on the bill.
bill medium A medium that contains bill information. For example, short message bill, paper bill, fax
bill, and email bill. To obtain a type of bill medium, customers might need to pay certain
fees.
bill run A process of calculating the billing result such as the monthly fee, discount, incentive,
usage summary, free unit, rebate, and other charge and credit (OCC).
bill sampling A task that the Billing subsystem automatically samples accounts and executes test bill
run on a specified day before the real bill run according to the rules set by the operator
and sends the execution result to the specified personnel by email.
bill suppress To suppress the printing of the paper bill of an account that meets certain conditions
during the bill run.
BMP See Business Management Point
brand A name that a carrier defines for a combination of products after segmenting the markets
according to the ages, consumption habits, and consumption levels of users to facilitate
the promotion. A carrier sells the combination of products by brand to the specified user
groups to make profits.
Business Management A network element that manages the operation of services, such as product management,
Point charging management, resource management.

A.4 C
CAC Charging Area Cell
call control A function of processing a call, consisting of creating, monitoring, maintaining,
connecting, and releasing a call and providing service features.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential A-3


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
A Glossary Performance Metrics Reference

call mask A mask that is displayed on a paper bill to replace the real phone number. For example,
the phone number 119 is displayed in a bill as the fire alarm.
call screening A service of call control. If the service is enabled for a subscriber, the subscriber can
maintain a screening table that records information such as discrete numbers, number
segments, areas, time segments, and passwords. Before a call is connected, the system
determines whether to continue the call according to the current attribute of the calling
subscriber and information such as the screening table, screening type, screening
strategy, and screening mode.
CAZ Charging Area Zone
CBS See Convergent Billing System
CC Customer Care
CCBS Customer Care & Billing System
CDMA Code Division Multiple Access
CDR Call Detail Record
charging event An event that occurs when a subscriber uses a service provided by the carrier. The event
is used for charging by the charging module.
Convergent Billing A network element that receives external charging requests and performs online charging
Point and offline charging.
Convergent Billing A system that supports multi-network, multi-service, and multi-charging modes. CBS
System refers to Convergent Billing System. The key features of the CBS are as follows: 1.
Convergence of service networks The convergent charging system provides the exact,
real-time, and flexible charging and unified customer services for the products and
services that are supported by the networks such as the fixed network, 2G, 3G, NGN,
and IPTV. 2. Convergence of multiple services The convergent charging system supports
the unified charging of voice services and data services. 3. Convergence of rating
categories Subscribers can switch between the prepaid mode and postpaid mode. 4.
Convergence of online charging and offline charging The convergence of online
charging and offline charging is useful in the integrated network environment, especially
when certain components in the network cannot trigger the online charging request in
real time.
CR See Credit Record
credit control A process of controlling the consumption amount of the telecommunications services
for a subscriber according to the remaining call fee and credit limit of the subscriber.
credit limit An amount that a subscriber can overdraw.
Credit Record An increase in the income or liability of a carrier in Double Entry mode. For example,
after the bill run is performed on an account, if the international roaming fee of the
account is 20 dollars, and the local call fee is 10 dollars, the carrier needs to collect 30
dollars from the account. At this time, the system generates two credit records, one for
the international roaming fee of 20 dollars, and the other for the local call fee of 10
dollars.
CRM Customer Relationship Management
CUG Closed User Group
customer An individual, an enterprise, or a corporation that uses the products or services provided
by the carrier or the partner of the carrier.

A-4 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference A Glossary

customer group A group of customers sharing the same properties. The Billing allows you to assign given
marketing message and bill insert to customer group members.

A.5 D
day end An operation that is performed by the system to generate journals according to the Double
Entry data in the system.
DC Debt Collection
DCC Diameter Credit Control
deactivation An operation that disables a postpaid subscriber to use different telecommunications
services provided by a carrier. After being deactivated, a subscriber account enters the
Disable state.
Debit Record An increase in the assets or expenses of a carrier in Double Entry mode. For example,
after the bill run is performed on an account, if the international roaming fee of the
account is 20 dollars, and the local call fee is 10 dollars, the carrier needs to collect 30
dollars from the account. At this time, the system generates a debit record, that is, a record
for the receivables of 30 dollars.
deposit An amount of money that is paid in advance by a customer as a guarantee to enjoy the
products or services provided by the carrier. For certain services, the customer must pay
certain deposits before subscription.
deregistration An operation of deregistering a subscriber. After being deregistered, a subscriber cannot
use the products and services that are provided by the carrier.
doubtful debt The account item and amount that a subscriber has owed for a specific duration.
DR See Debit Record
DS Data Service
dunning An action that a carrier performs to ask a subscriber to pay for outstanding bills. For
example, sending a dunning letter or suspending the subscriber.
dunning action An action that a carrier performs to ask a subscriber to pay for outstanding bills. The
dunning action can be sending a short message notification, barring the subscriber, or
suspending the subscriber.
dunning group A customer group that is defined according to certain rules. The same dunning policy is
used for the customers of the same customer group, and different policies are used for
different customer groups.
dunning plan The plan that a certain dunning action is performed to a certain subscriber some day. The
dunning plan is generated according to the dunning schedule.
dunning policy A policy made by a carrier for a specified dunning group, containing the information
about when to perform what dunning action after a bill cutoff date and the specific non-
dunning days. For example, the first dunning short message for the default dunning group
is sent at 18:00 on the first day after the bill cutoff day; the second dunning short message
is sent at 18:00 on the third day after the bill cutoff day; no non-dunning days are
specified.
dunning schedule A performance time of each dunning action for a dunning group of a bill cycle. The
dunning schedule is generated according to the dunning policy.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential A-5


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
A Glossary Performance Metrics Reference

A.6 E
e-voucher center A service that provides recharge and payment functions for subscribers through virtual
recharge cards. Carriers can issue the virtual recharge cards by setting up distributor
channel in the tree mode. Compared with the traditional recharge through real recharge
cards, the recharge through virtual recharge cards can save the card cost and enable
carriers to understand the precise information about transactions and inventories in time.
EFT Electronic Fund Transfer
ENIP Enhanced Network Intelligent Platform

A.7 F
Familiarity Number A mobile number that a subscriber sets, which can enjoy a preferential tariff when a call
is made between this mobile number and the mobile number of the subscriber.
fee item A detailed item of the consumption fees of a subscriber. For example, the local call fee
item and national toll call fee item.
FEP Front End Processor
final bill The last bill provided by a carrier to a subscriber after the subscriber leaves from the
network of a carrier. Regardless of the type of the bill that the subscriber subscribes to,
the carrier sends a paper bill to the subscriber after the subscriber leaves from the network
of the carrier.
FN See Familiarity Number
free resource A resource that a carrier provides for subscribers for free use. Free resources include a
certain number of short messages, the call duration, and the data traffic.
FTP File Transfer Protocol

A.8 G
GGSN Gateway GPRS Support Node
GL General Ledger
GPRS Generally Packet Radio System
GSM Global System for Mobile Communications
GUI Graphic User Interface
GW Gateway

A.9 H
HLR Home Location Register
hold To stop dunning a subscriber temporarily.

A-6 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference A Glossary

hold type A combination of one or more dunning actions to help to stop the dunning actions
temporarily at a time.
hot billing A process of performing the real-time bill run and generating a bill before the end of a
bill cycle as requested by a subscriber. The bill records the consumption of the subscriber
in the bill cycle.
HTTP Hypertext Transfer Protocol

A.10 I
ICP Information Content Provider
ID Identification/Identity
IMSI International Mobile Subscriber Identity
IN Intelligent Network
incentive A special preference or bonus that is provided by a carrier for encouraging subscribers
to use services.
installment rebate A preference policy with which a carrier returns certain fees to a customer in multiple
bill cycles.
invoicing A process of generating integrated bills for billed data as requested by a carrier.
IP Internet Protocol
IPCG IP Charging Gateway
IPSec IP Security Protocol
IVR Interaction Voice Response

A.11 J
journal A record that records the transaction information in a formatted way, usually known as
double entry. The basic items a journal needs are the transaction date, transaction
description, debit amount or credit amount, and G/L code.
journal summary The summary of the journals in a specified standard format.

A.12 L
LOD Letter of Demand

A.13 M
main product Basic product that a subscriber must subscribe to for using network resources before
subscribing to appendant products. In general, a main product includes basic network
services and basic tariffs. In the OCS, the subscription instance of a main product
corresponds to one subscriber.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential A-7


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
A Glossary Performance Metrics Reference

marketing message The message printed on the first page of paper bill, which is used to attract customer's
attention and stimulating customer's consumption.
MCC Mobile Country Code
MMS Multimedia Messaging Service
MMSC Multimedia Messaging Service Center
MO Mobile Originated
monthly settlement System operation of generating monthly settlement data on the basis of the double-entry
bookkeeping data recorded by the system.
MSC Mobile Switching Center
MSISDN Mobile Subscriber International ISDN/PSTN Number
MT Mobile Terminated

A.14 N
NAEDO Non Authenticated Early Debit Order
NE Network Element

A.15 O
OCC See Other Charge and Credit
OCS See Online Charging System
Online Charging A system that implements the convergence of online charging and offline charging, voice
System service charging and data service charging, prepaid subscriber management and postpaid
subscriber management. The OCS system provides the functions such as rating,
subscriber balance management, and real-time monitor.
OSMS Object Storage Management System
Other Charge and Other Charge and Credit, which is used to adjust the fee separately. For example, when
Credit a bill with error fee is found, you can correct it through OCC.

A.16 P
package A set of services that a carrier uses to propaganda and launch a brand to attract
subscribers.
PIN Personal Identity Number
pool period A period in which a subscriber of an account that is in Disable state does not recharge
the account after the deletion period An account in this period is in Pool state. A
subscriber in Pool state cannot perform any operations. The OCS system deletes the
subscriber account and reclaims the number resources after the pool period.
POS Postpaid Subscriber
posting The procedure of transfering journal entries to the ledger accounts.

A-8 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference A Glossary

postpaid A mode in which a subscriber is allocated a certain credit and the subscriber does not
need to pay fees in advance when using a telecommunications service.
PPS Prepaid Subscriber
prepaid The mode in which a subscriber pays for the telecommunication services provided by a
carrier in advance.
price plan A set of pricing policies provided by a carrier for a group of telecommunications services.
The charging system can calculate the fees for using the service based on the service
usage and pricing plan of a subscriber.
PRM Partner Relationship Management
product A combination of one or more services with predefined tariff. Carriers can directly sell
the combination of services to customers.
PSTN Public Switched Telephone Network

A.17 R
RA Revenue Assurance
rating To perform the fee calculation on the preprocessed service records according to charging
resources, tariffs, subscriber information, and product information.
RBT Ring Back Tone
reconnect To resume the call service of a subscriber. Reconnection is the reverse operation of
suspension.
refund A process of returning the advance payment or deposit in the account of a subscriber to
the subscriber in a certain way, for example, by cash or by check.
RICA Regulation of Interception of Communications and Provision of Communication-
Related Information Act
roaming in A process for a subscriber to access the home telecommunications network from a non-
home telecommunications network.
roaming out A process for a subscriber to access a non-home telecommunications network from the
home telecommunications network.

A.18 S
SDP Service Data Point
service A group of functions, material objects, or procedures that a service provider develops
for sale in products. A service does not have any price and cannot be sold to subscribers.
settlement A process of allocating the collected service fees that are generated during the
cooperation between partners when a telecommunications service involves the
communication resources or value-added service resources of multiple partners. The fee
allocation is based on the resource usage and agreement that is signed by the partners in
advance.
SIM Subscriber Identity Module

Issue 01 (2011-02-26) Huawei Proprietary and Confidential A-9


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
A Glossary Performance Metrics Reference

SMAP Service Management Access Point


SMG Short Message Gateway
SMP Service Management Point
SMS Short Message Service
SMSC Short Message Service Center
SP Service Provider
special day A day when a subscriber is free of dunning. A special day can be a legal holiday or a day
with special meaning, for example, New Year's day or horse-racing day in Hong Kong.
SSP Service Switching Point
suspension A specific state in the life cycle of a subscriber, also called barring. A subscriber in this
state can neither make calls nor receive calls, but subscriber can call the phone of
customer service.
suspension period The period in which a subscriber account is not recharged after the activation period. An
account in the suspension period is in Suspend state. Generally, the balance and bonus
resources of an account in Suspend state are available. The subscriber is restricted in
using certain services. For example, a subscriber of an account that is in Suspend state
cannot use the free resource account for making calls. If a subscriber recharges an account
during the suspension period, the account returns to Active state. At the same time, the
validity period of the account is extended.

A.19 T
tariff The designation of the pricing, discount policies, and applicable rules of a product.
TCP Transfer Control Protocol
test billing The simulative bill run performed before the formal bill run for detecting the possible
errors in the formal bill run in advance. The test billing simulates the real bill run process.
transaction A business between the carrier and customer, such as change rate plan and change service
package.
transfer A process of transferring the account balance of an account to another account.
trigger threshold A lower limit of the outstanding amount of a subscriber for the DC system to
automatically perform a dunning action on the subscriber. The DC automatically
performs a dunning action on the subscriber only when the payment period of the
subscriber expires and the outstanding amount of the subscriber reaches this value. The
trigger threshold varies according to dunning group and dunning action. For example,
the trigger threshold of the first dunning short message of a subscriber for the default
dunning group is 10 dollar; the trigger threshold of the second dunning short message
of the subscriber for the default dunning group is 20 dollar; the trigger threshold of the
first dunning short message of the subscriber for the VIP dunning group is 100 dollar.

A.20 U
unhold To cancel the hold operation on a subscriber.

A-10 Huawei Proprietary and Confidential Issue 01 (2011-02-26)


Copyright © Huawei Technologies Co., Ltd.
HUAWEI CBS
Performance Metrics Reference A Glossary

upper limit The maximum consumption amount that a carrier sets for a subscriber in a bill cycle. If
the consumption amount if a subscriber exceeds the maximum consumption amount that
the carrier sets, the OCS system still deducts the maximum consumption amount that the
carrier sets.
URL Universal Resource Locator
USSD Unstructured Supplementary Service Data
UVC Uniform Voucher Center

A.21 V
VC Voucher Center
void A special transaction that is initiated by an operator to request the system to cancel the
processing result of a financial transaction that is not complete according to the
predefined process.
VPN Virtual Private Network

A.22 W
WISG Wireless Integrated Service Gateway
write off To deregister the bad debts that cannot be collected.

Issue 01 (2011-02-26) Huawei Proprietary and Confidential A-11


Copyright © Huawei Technologies Co., Ltd.

Anda mungkin juga menyukai