This counter provides the maximum ping delay variation of an IP The system automatically samples the
path in the specified measurement period. It takes effect only when IP path ping delay every 5 minutes. In
the IPPATH PING function is enabled the specified measurement period, the
max ping delay is set to be this
counter
This measurement item provides the unavailability time of a NodeB, The RNC measures this item based
that is, the out-of-service time of a NodeB. The NodeB is unavailable on the accumulated unavailability time
in the following conditions: (1) The NodeB fails; (2) All the cells are of the NodeB in a measurement
deactivated; (3) The RNC fails. Note: In the measurement period, the period.
RNC does not add the duration of carrier shutdown to the cell
unavailability time.
This counter provides the number of packets resent on the SCTP link In the measurement period, the
in the specified measurement period. counter is incremented by one when
the packet is resent on the SCTP link.
All the packets transferred on the SCTP links are assembled from In the measurement period, the
data blocks. Error packets may occur with respect to network counter is incremented by one when
performance or upper-layer application. This counter provides the the error packets are received on the
number of error packets received over SCTP links. SCTP link.
This counter provides the in-service duration of an SCTP link. This measurement is triggered when
the SCTP link changes from the
unavailable state to the available
state. The measurement is stopped
and the service duration is calculated
when the SCTP link returns to the
unavailable state. At the end of the
measurement period, the system
calculates all the service durations of
the SCTP link and restarts the
measurement.
This counter provides the congestion duration of the SCTP link. This measurement is triggered when
congestion occurs on the SCTP link.
The measurement is stopped and the
congestion duration is calculated when
the SCTP link changes from the
congestion state to non-congestion
state. At the end of the measurement
period, the system calculates all the
congestion durations of the SCTP link
and restarts the measurement.
This counter provides the maximum total throughput of uplink and The total throughput of uplink and
downlink PS services in the RNC. downlink PS services in the RNC is
sampled periodically. At the end of the
measurement period, the maximum
throughput is obtained. The RLC
header is not included and the
retransmission data is included in the
counter.
This measurement item provides the maximum equivalent Erlang The RNC periodically takes a sample
values of all the services in the CS domain within the RNC. from the equivalent Erlang values of
all the services in the CS domain. At
the end of the period, the RNC
calculates the maximum equivalent
Erlang of all the services in the CS
domain within the RNC, include the
equivalent Erlang of all radio links of
Soft Handover.Each time a CS domain
service is established, the RNC
converts its rate to the equivalent
Erlang, and then increases the
equivalent Erlang of the CS domain in
the current RNC. Each time a CS
domain service is released, the RNC
decreases the equivalent Erlang of the
CS domain in the current RNC.
This counter provides the maximum CPU usage of the DPU in a The CPU usage of the DPU is
measurement period. It indicates the load and operating sampled every second in the
performance of the CPU on the DPU in the measurement period. measurement period. Then, the
maximum usage is taken as the value
of this counter.
This counter provides the maximum CPU usage of the GCU in a The CPU usage of the GCU is
measurement period. It indicates the load and operating sampled every second in the
performance of the CPU on the GCU in the measurement period. measurement period. Then, the
maximum usage is taken as the value
of this counter.
This counter provides the maximum CPU usage of the SCU in a The CPU usage of the SCU is
measurement period. It indicates the load and operating sampled every second in the
performance of the CPU on the SCU in the measurement period. measurement period. Then, the
maximum usage is taken as the value
of this counter.
This counter provides the maximum CPU usage of the XPU in a The CPU usage of the XPU is
measurement period. It indicates the operating load and sampled every second in the
performance of the CPU on the XPU in the measurement period. measurement period. Then, the
maximum usage is taken as the value
of this counter.