Bespoken Custom-made:
Custom specific HDL-6 construction
Free Choice of Fenwal Detect-a-Fire Sensor
1 pc or 2 pc of Cable Glands,
2,4,6,8 pole or more Ultra high temp. Ceramic wiring
blocks, Painted HDL-6 boxes are:
Chromate primed and polyester powder
Wiring blocks assemblies are suitable until 210 °C
coated for added
use, protection against corrosion until 180 °C
High Temp. Cement based EOL and/or
Series Resistors on request
Applications:
- Ex ‘d’ flameproof Applications
- Marine- and Offshore platforms - Gas-turbine- and Turbine housings,
- and many more
HDL-6 Ex*:
Recommended for any kind of high temperature indus-
trial and commercial applications where there harsh en-
viromental & Ex requirements. Designed until 210°C /
220°C applications.
Housing Ex-certified:
Protection: - IP66/67,
When fitted with a gasket - IP66
- Wiring Terminal: suitable until 210 °C use acc.
Without gasket - IP54
Ex requirements
Application of a non hardening grease to
flamepaths and entries is recommended.
Standard Ex Cable gland variations: See on Page 24
Earthing: –70 - +220°C with Silicone-seal, IP66/68
All enclosures are supplied with a 6mm
stainless steel (18/8) internal and external Options/ Accessories: See on Page 24
earth stud as standard. - 2. Cable gland (Option KD)
Larger internal earth terminals can be fitted - Cement based ultra high temperature Series and
on request. EOL – End of Line Resistors
- Ultra high temperature Silicone Sealings
Dimensions & Material:
Aluminum housing: 165 x 125 x 120 mm,
Material (Body & cover):
Aluminum alloy EN AC-42000 HDL-6 Enclosures Certified according to:
(LM25) to BS EN 1706:1998 with
less than 0.2% copper content
Locking Screw: Stainless steel (18/8)
(for further info and actual certificate please contact LICO)