Initial connection
The various connection methods
login:
► Default account:
– Login: manager
– Password: friend
Hands-on-Workshop
Start-up
Start-up: bootloader
► User Mode
– In this mode, the user has access to a restricted set of commands that
do not affect the operation of the switch, but are used to perform some
diagnostic tests.
– The prompt appears on screen as follows:
awplus>
The Command line modes
► Privileged Mode
– In this mode, all system commands are accessible, including file system
management, protocol function display, reboot in factory configuration,
etc.
– Enter the command " enable" from user mode to activate this mode.
– Use "disable" to quit this mode.
– The prompt appears on screen as follows:
awplus#
The Command line modes
– This mode gives access to all configuration commands for the equipment.
– Enter the command "configure terminal" from privilege mode to activate
this mode.
– Use "end" to quit this mode.
– The prompt appears on screen as follows:
awplus(config)#
– Privilege mode commands can be executed from this mode by prefixing
them with "do":
awplus(config)# do show ip interface brief
The Help system
Help system
► Removal
– To remove an IP address:
awplus(config)# interface vlan1
awplus(config-if)# no ip address
Managing users
Managing users
► Creating/modifying users
– You have to be in configuration mode:
awplus> enable
awplus# configure terminal
– Creation/Modification:
awplus(config)# username <name> privilege <1-15>
password <password>
– Only users with privilege 15 have access to privilege and configuration
modes.
– The command 'no' removes a user:
awplus(config)# no username <name>
Configuration management
Configuration management
– Display configuration:
awplus# show running-config <module>
module=access-list, interface, stack, etc..
(full list with show running-config ?)
– Display configuration:
awplus# show startup-config <module>
module=access-list, interface, stack, etc..
(full list with show running-config ?)
► Display of SFPs:
awplus# show system pluggable
System parameters (Modify)
– Removal of banner
awplus(config)#no banner motd
Managing clock
Managing clock
► Display:
awplus# show clock
UTC Time: Thu, 17 Jan 2008 14:09:04 +0000
Timezone: UTC
Timezone Offset: +00:00
Summer time zone: None
► Configuration:
awplus# clock set <hh:mm:ss> <day> <month> <year>
► NTP configuration:
awplus(config)# ntp server <NTP IP address>
awplus(config)# no ntp server
"Summer time" configuration
► The switch can apply summer time and winter time automatically.
► You have to define a geographical zone, giving the times and dates
of the changeover.
awplus(config)# clock summer-time ZONENAME recurring START-WEEK
START-DAY START-MONTH START-TIME END-WEEK END-DAY END-MONTH END-
TIME <1-180>
awplus(config)# clock summer-time PARIS recurring 5 Sun Mar 02:00 5
Sun Oct 03:00 60
Managing file system
Managing file system
► Display Files (Privilege mode):
awplus# dir
-rw- 12539254 Nov 9 2007 15:21:57 r6-5.3.3-0.1.rel
-rw- 12534263 Oct 5 1977 12:49:45 r6-5.3.3.rel
► Managing files
– Copy a file copy <Src-url> <Dest-url>
– Delete a file del <url>
Types of URL permitted:
filename
tftp://10.0.0.1/filename to or from 10.0.0.1 in tftp
sftp:// 10.0.0.1/filename to or from 10.0.0.1 in sftp scp://
10.0.0.1/filename to or from 10.0.0.1 in scp
flash:/filename to or from Flash
card:/filename to or from SD position
Managing file system
► Copy assistant
– A copy assistant has been included to simplify file transfer between switch
and other equipment.
– To use it, you define the source medium and destination medium, then
answer the assistant's questions.
Examples:
copy tftp flash copy from a tftp server to flash
copy flash tftp copy from flash to tftp server
– Back up a test.cfg file to a tftp server at address 10.0.0.1
awplus# copy flash tftp
Enter source file name []:test.cfg
Enter destination host name []:10.0.0.1
Enter destination file name [test.cfg]:test.cfg
Copying..
Update operating system
Update
► Transfer the image to the flash
– Use the transfer assistant (Privilege mode):
awplus# copy tftp flash
awplus# enter source host name[]:192.168.1.254
awplus# enter source file name[]:r6-5.3.3-0.4.rel
awplus# enter source file name[r6-5.3.3-0.4.rel]:r6-
5.3.3-0.4.rel
– Selected ports:
portx.y.z,portx.y.z
– Activation
awplus(config)# interface port1.0.1
awplus(config-if)# no shutdown
► Configuring speed
awplus(config-if)# speed <value>
10 set 10 Mbps link speed
100 set 100 Mbps link speed
1000 set 1000 Mbps link speed
auto set link speed autonegotiation
Configuring ports
show tech-support
► Switch tables
– The various equipment tables can be displayed using the command:
show platform table <table-name>
Questions
?
? ?
Thank You!
Americas Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
EMEA & CSA Operations | Incheonweg 7 | 1437 EK Rozenburg | The Netherlands | T: +31 20 7950020 | F: +31 20 7950021
© 2016 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.