PROJECT
3.0 MTPA Integrated Steel Plant PREPARED S.M. 12.01.17 DOC. NO. NMDC/TPL/TS/05/10/0
CLIENT NMDC LIMITED CHECKED S.M. 12.01.17 REV. NO. 0
SITE Nagarnar, Chhattisgarh TATA PROJECTS LIMITED APPROVED S.M. 12.01.17
PKG 05 METALS AND MINERALS DIVISION
14
LEGEND
CHV(W) Page 1 of 8
IW: INDUSTRIAL WATER
NOTES
1) All flanged end valves shall be supplied with companion flanges, gaskets, washers and fasteners in adequate quantity and of correct specification.
2) Painting, surface preparation shall be as per MECON GS-09.
3) For specification and data sheet of valves, refer specific valve code (duty data sheet no.) of DC document P002076BD00-118BD00-000-PF0001 REV.6 for wate
valves and DC document P002076BD00-118BD00-000-PF0002 REV.3 for gas service valves.
4) YES = Technically Accepted/ Will be considered for Further Processing
5) NO = Technically Not Accepted/ Not Listed in Approved Make List/ Regreat To Quote/ Will Not be considered for Further Processing
CHV(W) Page 2 of 8
ENGINEERING
NMDC/TPL/TS/05/10/0050
0
NOS.
CHV(W) Page 3 of 8
DC document P002076BD00-118BD00-000-PF0001 REV.6 for water service
CHV(W) Page 4 of 8
4506 m3 Blast Furnace Complex SIGN DATE ISSUED BY ENGINEERING
PROJECT
3.0 MTPA Integrated Steel Plant PREPARED S.M. 12.01.17 DOC. NO. NMDC/TPL/TS/05/10/0050
CLIENT NMDC LIMITED CHECKED S.M. 12.01.17 REV. NO. 0
SITE Nagarnar, Chhattisgarh TATA PROJECTS LIMITED APPROVED S.M. 12.01.17
PKG 05 METALS AND MINERALS DIVISION
LEGEND
AC: COMPRESSED AIR
NI (MP): NITROGEN (MEDIUM PRESSURE)
NOTES
CHV(G) Page 5 of 8
1) All flanged end valves shall be supplied with companion flanges, gaskets, washers and fasteners in adequate quantity and of correct specification.
2) Painting, surface preparation shall be as per MECON GS-09.
3) For specification and data sheet of valves, refer specific valve code (duty data sheet no.) of DC document P002076BD00-118BD00-000-PF0001 REV.6 for
valves and DC document P002076BD00-118BD00-000-PF0002 REV.3 for gas service valves.
4) YES = Technically Accepted/ Listed in Approved Make List/ Will be considered for Further Processing
5) NO = Technically Not Accepted/ Not Listed in Approved Make List/ Regreat To Quote/ Will Not be considered for Further Processing
CHV(G) Page 6 of 8
ENGINEERING
NMDC/TPL/TS/05/10/0050
0
NOS.
CHV(G) Page 7 of 8
d fasteners in adequate quantity and of correct specification.
CHV(G) Page 8 of 8