REPORT
THE OWNERS MANUAL FOR THE DETECTOR PROVIDES ACCURATE INSTRUCTION AS TO HOW THE UNITS IS CALIBRATED. THE
MANUAL INSTRUCTIONS SHOULD BE PRESENT AND FOLLOWED. BE SURE TO REMOVE THE FLOW VALVE AFTER USE, AND CHECK
THAT THE CYLINDER IS NOT LEAKING.
Cal Gas Expiry Date: DEC 2019 Cylinder Pressure on Completion: 800 psi
Comment:
MSA Altair 5x has been calibrated according to the specification. Humidifier tube was used during test
for accuracy. All sensor elements are working properly
Signed:
*Note: If a sensor does not give an initial response to gas within 10 seconds, the sensor fails. Recalibrate and
Retest. If the sensor still fails, complete an AFN and take out of service.
Use a separate form if 2 different gas bottles are used (ie. Quad Gas/Single gas)
FR – 08 – 4.2.1.3f - 01