0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
334 tayangan1 halaman
This document outlines test procedures for electric actuators on valves. It lists 14 test steps to check the actuator and valve operation in both local and remote modes. These include checking positions, LED displays, limit switches and manual override functions. Upon completing all tests successfully, the equipment is accepted for shipment.
This document outlines test procedures for electric actuators on valves. It lists 14 test steps to check the actuator and valve operation in both local and remote modes. These include checking positions, LED displays, limit switches and manual override functions. Upon completing all tests successfully, the equipment is accepted for shipment.
This document outlines test procedures for electric actuators on valves. It lists 14 test steps to check the actuator and valve operation in both local and remote modes. These include checking positions, LED displays, limit switches and manual override functions. Upon completing all tests successfully, the equipment is accepted for shipment.
1 Check actuator data and valve data. 2 Connect power supply to actuator terminals. 3 Select LOCAL-REMOTE selector to LOCAL. 4 Note the torque set value and position setting with the IQ setting tool. Turn OPEN-CLOSE knob to OPEN, ensure valve in fully open position. Check 5 OPEN Icon & RED LED display on the actuator. Turn OPEN-CLOSE knob to CLOSE, ensure valve in fully close position. Check 6 CLOSE Icon & GREEN LED display on the actuator 7 Engage STOP button to cancel command while actuator is running 8 Select LOCAL-REMOTE selector to REMOTE. 9 Send OPEN command by momentarily contact between terminal (5 to 35) Ensure valve in fully open posiiton. Check remote indication limit switch 10 contacts. 11 Send CLOSE command by momentarily contact between terminal (5 to 33) Ensure valve in fully close posiiton. Check remote indication limit switch 12 contacts. 13 Engage STOP button to cancel command while actuator is running Engage Hand-Auto lever and check for manual handwheel operation of actuator 14 and valve. Check for manual turning direction.
This equipment has been inspected and functionally tested and is accepted and released for shipment