Blowers
Kongskilde’s FRL, FEA and TRL blowers constitute a range of
proven conveying blowers, which are an ideal energy source
for a vast number of industrial material handling systems.
The blowers can be used for both The blowers are designed as a
suction- and blowing systems as centrifugal fan with a perfectly
well as suction-blowing-systems. balanced rotor and thus a vibration-
But they are not intended for free operation, which minimises the
corrosive gases and the air tempe- noise level.
rature must not exceed 70°C.
Application
FRL/FEA
Kongskilde’s FEA 10 is a one-stage But they are also very suitable for most TRL 20/40/55/75
centrifugal blower with a closed rotor suction purposes e.g. suction of TRL 20/40/55/75 are directly driven.
with 6 forward curved blades. It is welding fume as well as to solve many TRL 20/40/75 are supplied with air intake
particularly built for ventilation tasks. ventilation tasks. mesh guards.
Suitable applications include suction of
welding fume and gases. The small and medium-sized blowers are TRL 55 is supplied with automatic air
one-stage centrifugal blowers with regulator.
FRL 10 is a one-stage centrifugal closed rotors, whereas TRL 300 and 500
blower with an open rotor with 8 have two respectively three stages, TRL 100/150/200
backward curved blades. Therefore, which also are equipped with, closed Within the TRL 100/150/200 blowers,
light material as e.g. plastic flakes can rotors. pressure and air volume can always be
successfully be conveyed through the adjusted to the purpose thanks to the
fan. The blower is at the same time TRL 55/100/150/200/300 and 500 are ability of adjusting the rpm of the rotor.
very suitable for light dust and equipped with air regulator. Combining The blowers can be fitted with 7.5 to
shavings exhaust purposes. the blower with an air regulator 15 kW motors, which have been
optimises the conveying air speed by adjusted to the rpm of the rotor.
Both types (FRL/FEA) are available with keeping the air velocity below 25 m/s,
and without motor. which minimises damage of the The blowers are delivered with V-belt
material even when conveying delicate transmission.
TRL materials. The constant air velocity does
The Kongskilde high-pressure blowers are also prevent overloading of the motor TRL 300/500
available in a wide range of sizes – and minimises the power consumption. The special advantage of the TRL
providing a variety of performance 300/500 blowers is that they are
characteristics capable of meeting TRL20/40 can be used as either transport capable of supplying an exceptional
specific industrial requirements. blower or suction blower whereas the high pressure caused by the two-
TRL 55/75/100/150/200/300/500 can be respectively three-step construction as
The TRL range with accessories is ideal utilised for both suction and blowing each stage of the blower increases the
for conveying of granular material and as well as they can be installed as a air pressure.
similar products with specific weight combination of a suction-blowing-
between 0.2 and 0.8 ton/m3. system.
675
531
130
307
107
635 335
206
485
463
TRL 40 TRL 55
840
860
120
120
755 420
420
755 580 670
TRL 75
860
140
420
755 580
Technical Data
FRL 10 FEA 10 TRL 20 TRL 40 TRL 55 TRL 75
Motor rating, kW (Hp) 0,75 (1) 0,75 (1) 1,5 (2) 3 (4) 4 (5,5) 5,5 (7,5)
Motor rpm 2900 2900 2900 2900 2900 2900
Electrical supply, V/Hz 3 x 400 V, 50 Hz
Amp. consumption 1,7 1,7 3,1 5,8 7,5 10,5
Weight w. motor, kg 21 21 35 67 76 96
Noise level, 1m distance dB (A) 76 76 83 82 91 85
Noise level, 7m distance dB (A) 61 61 64 64 77 71
Dimensions
TRL100/150 TRL200
830
119
1000
117
695
370
370 435
1140
1140 875
TRL300 TRL500
1006
929
108
120
583
955 MAX. 1380
1225 1135
1330
Technical Data
TRL 100 TRL 150 TRL 200 TRL 300 TRL 500
TRL600/750/1000
Technical Data
TRL 600 TRL 750 TRL 1000
FRL/FEA TRL
Pressure total, Pt Pressure total, Pt
kPa mm.WG. kPa mm.WG.
kPa
5000
7000
4000 TRL1000
6000
TRL750
TRL1000
mm WG
1000 3000
0 2000
0 1000 2000 3000 4000 5000 6000 7000
1000
m3/h
0
0 500 1000 1500 2000
m3/h
Air volume
The max. air volume delivered by the TRL blowers with air regulator is approximately 1800 m3/h at different pressures
depending on the type of blower. It is a general rule in pneumatic conveying that the higher pressure in the system, the higher
the transfer rate.
123001859 EXP/GB/TRL/DATA/0416
Subject to be changed without notice.