=================================================================
Login: reset
Login: admin
Password: a10
A10> en
A10# config
A10(config)# system-reset
[yes/no]: yes
carry out
You can manage and access A10 products in two ways, "CLI" and "Web GUI".
Management access
Description
method
CLI SSH access to MGMT port, Console access to Console port, etc.
" 172.31.31.31/24 " is assigned to the MGMT port as the initial IP address .
The initial user name is " admin ", the initial password is " a10 ", and the enable password is not set yet.
◇ To log in with CLI, enter the user name "admin" password "a10".
Welcome to Thunder
Password: ***
◇ To enter privileged mode, enter " enable ". Password is not set.
Thunder> enable
password: ← just enter "Enter key" without entering anything.
Thunder #
Thunder (config) #
To fully initialize Thunder's configuration, enter " system-reset " in config mode .
Rebooting AX ...
Since not all information such as logs disappears, also input " clear log " and " clear audit ".
In A10 configuration itself, you can get setting information with show running-config, but if you want to
get not only config but also the certificate private key, AfleX setting etc., you can set config with
thebackup system command as follows Get it. To restore , use the restore command.
◆ Example of executing a configuration backup (Backup of config, AfleX, certificate, secret key, etc.)
◆ Example of executing the configuration restore (restoring information acquired by the backup system command)
Backup and restoration is easier to understand if it is in GUI environment. To do this, select "System" →
"Maintenance" → "Backup" → "System". Then the next screen is displayed, so you can download the