FIRST REVIEW
Submitted by
A.NAVEENKUMAR 2016251002
INTRODUCTION
The following are the outcomes of the PHASE I of the project work
3) Working of the expander expansion device was studied which includes the
detailed thermodynamic analysis of each sub components in the ejector.
Design a heat exchanger for utilising the waste heat rejected from the gas
cooler
SYSTEM DESCRIPTION
Assumption
2.5
2
COP , QE
1.5 cop
1 qe
0.5 we
0
70 90 110 130
Gas cooler pressure (bar)
From the diagram we can know every different ambient condition there is one
optimum pressure for which COP is maximum
This pressure is found out by empirical relation PGC = 2.7 TGC, exit – 6 (swalha
et al 2012)
Transcritical booster cycle P-h diagram
If ambient temperature is 40°C, heat rejected from the gas cooler is
294.45 kW i.e. compressor outlet temperature is 113°C and optimum gas cooler
pressure is 102 bar. Hence there is a huge potential to utilise this waste heat to
heat the water. De-superheater is added to utilise the waste heat rejected from the
gas cooler.
CONCLUSION
REFERENCE
3. Ge, Y.T., Tassou, S.A., 2009. Control optimisation of CO2 cycles for
medium temperature retail food refrigeration systems. Int. J.
Refrigeration 32, 1376–1388.