SPS – SURF
Subsea Production Systems
Umbilicals
Risers
Flowlines
Engineering the future
Subsea Valley represents some of the world’s leading and most innovative subsea
companies, located in the greater Oslo region.
Through our collaborative initiatives, activities and infrastructure, we help strengthen our
member’s competitiveness in the national and global market.
subseavalley.com
post@subseavalley.com
Frontpage: Main: Source: Equinor/Elin A.Isaksen (Below left: Source: IKM Subsea, middle: Source: AKOFS Offshore, right: Source: Subsea 7 Norway.
Introduction
Moving into increasingly deeper waters has been a major trend in the development of
offshore oil and gas discoveries. As discoveries on the Norwegian continental shelf
(NCS) called for solutions for water depths in excess of 200 – 300m development of
floaters and SPS-SURF solutions became increasingly important Compared to fixed
platform solutions.
Regional Director,
The Norwegian oil & gas industry met this domestic challenge through R&D, feasibility Per Hagen
studies and technology development and this resulted in innovative solutions initially
qualified for field developments on the NCS.
It also resulted in a cluster of suppliers and service providers as well as companies with
marine operations capability, required to implement the solutions in the field.
SPS-SURF solutions will continue to play an important role as fields are to be developed
in deeper and more remote areas – as well as for the development of marginal fields
tied back to shore, fixed or floating hubs covering larger areas.
Over the last 20 years Norwegian-based SPS-SURF companies has faced even bigger
technical challenges in international markets and, through their deliveries, been
recognized as a world class cluster. This catalogue presents the Norwegian SPS-SURF
Cluster with its significant growth of SME companies as well as ship-owners moving
into marine operations.
The catalogue presents Norwegian Energy Partner companies and their capabilities in
SPS-SURF area as well as a matrix for a quick overview of their capabilities.
The main categories used in this capability matrix are:
Engineering & Technical Services: Subsea and SURF technologies are highly
specialized with particular demands on engineering & technical services; covering
services from multiphase flow simulations, total system studies, pipeline and subsea
architectural design to detailed installation and tie-in studies and also technical
support services ensuring technical integrity of the subsea assets, a category primarily
for companies providing these services as primary business.
Subsea Production Systems (SPS): These hardware systems can range in complexity
from a single satellite well tied back to a fixed platform or a floating installation, to
several wells on a template or clustered around a manifold and producing to a fixed or
floating production facility. Subsea Production Systems include seabed located hard-
ware, from wellheads and X-mas trees to templates, manifolds and connection systems
for flowlines and risers, as well as potential subsea power, separation and boosting
systems. Also specialized equipment like tooling for installing and maintaining the
systems and working over the wells are included. This is a category primarily for
companies providing SPS hardware including the required engineering to deliver it.
Umbilicals, Risers & Flowlines: This covers the hardware elements required to connect
the subsea systems to shore, a fixed platform or a floating unit. These categories are for
companies providing hardware including the required engineering to deliver it.
Marine Operations and Intervention: The installation of SPS - SURF hardware and the
servicing of it throughout its life cycle requires marine installation and/or intervention.
Servicing requires deployment of tooling, RIVs etc. from intervention vessel.
3
Marine
Subsea
Systems
Hardware
& Services
Umbilicals
Production
(Hardware)
& Flowlines
Operations,
Engineering
Intervention &
Subsea Services
repair
Tie-ins
Subsea
Light well
Controls &
processing
engineering
intervention
Tree systems
Pipeline & riser
Measurements
Subsea power/
Seabed surveys
Subsea facilities
Technical services
Seabed installation
Pipelaying, Pipeline
& Light intervention
Production services
Tooling/Connectors
4 Subsea
ABB AS
Aker Solutions
AKOFS Offshore
Axess
Benarx
ClampOn AS
Cranemaster
CRE8 Systems AS
CSUB
Deep C
DeepOcean AS
Djuvik Maskinering
DNV GL
DOF Subsea AS
FORCE Technology Norway AS
Freudenberg Oil & Gas Technologies
Fuglesangs Subsea AS
Hitec Products
HTS Maskinteknikk
IK Norway
IKM Ocean Design
IKM Subsea
IKM Testing AS
IMENCO
Institute for Energy Technology (IFE)
KONGSBERG Maritime
Lloyd’s Register
Multiconsult
Nautilus
Neodrill
Nexans Norway AS
Niras
Norvalves
NOV - SEABOX
Nymo
Ocean Installer
PartnerPlast
PG Flow Solutions (Ing. Per Gjerdrum AS)
Reinertsen New Energy
Scan Tech
Scanmudring
Sensorlink
Shawcor
Siemens Subsea
SINTEF Ocean
Sub Sea Construction
Subsea 7
TechnipFMC
TP Connectors
Trelleborg Offshore
Wirescan
4Subsea
4Subsea is a leading provider of technology and services that help operators maintain
production from subsea oil and gas fields and offshore wind farms. By combining expert
engineering competence, practical experience and a digital service, we ensure the integrity
of subsea assets all the way from reservoir to deck.
The company was founded in 2007 and our clients • Pipe dissection and failure investigation
include all the major oil and gas operators as • Integrity Management
well as the large suppliers of subsea equipment. • Advanced engineering services
4Subsea delivers solutions on a unique digital • R&D projects
platform, aiming to be in the forefront of digitising
oil, gas and offshore wind operations worldwide. Well Intervention and Drilling
We help operators perform offshore completion,
WHAT WE DELIVER drilling, and intervention operations safely and
• Dedicated integrity applications cost efficiently.
– to take care of assets Solutions:
• Repair and instrumentation solutions • SWIM™ - wellhead integrity monitoring
– to avoid loss of production • Conductor analysis
• Common data reservoir • Advanced engineering services
– to learn, analyse and improve operations • WellTrack™ - digitised well operations
TECHNICAL SERVICES
• Transparency from reservoir to deck
RISERS, FLOWLINES & TIE-INS – to ensure collaboration AUTONOMOUS SENSOR TECHNOLOGY
• De-bundling of services – open APIs Our autonomous sensor technology is designed
– to reduce cost and improve quality for retrofit installation by ROV and allows for
• «SWAT» teams for managing anomalies continuous monitoring of subsea assets for up
– to get the best support when needed to 10 years. The sensors come with powerful
• Cost effective operations, maintained compute and data storage capacity. All sensors
production, and reduced risk communicate wirelessly to ROVs, acoustically
– to know it before it happens and manage it to the surface, or directly to shore via satellite.
Solutions include; a 6-axis gyro, vibration
PRODUCTS & SERVICES monitoring, ROV installable strain sensors,
Flexible Risers and Flowlines pressure and temperature sensors, wall thickness
We aim to be the leading global provider of monitoring and detection of flooding of tanks and
independent services on flexible pipes. structural members.
Solutions:
• Flexible riser annulus testing DIGITALISATION OF OIL & GAS
• Portable Annulus Tester for automated testing We provide a range of dedicated apps allowing
• FlexTrack™ - digitised riser management operators to manage the integrity of their subsea
• Flexible riser repair clamp assets. Our digital platform facilitates streaming
of data to the cloud and use of algorithms and
machine learning to provide operational decision
support tools. Our apps include; FlexTrack™,
WellTrack™ and DataReservoir.io™.
REFERENCES
Statoil, Lundin Norway, ExxonMobil, Shell,
Wintershall, TechnipFMC, BP, Total, Aker Solutions.
One Subsea, Aker BP, Det norske, VNG Norge,
Maersk Oil, National Oilwell Varco, Nexen.
Aker Solutions is a global provider of SPS-SURF design and engineering, products, systems
and services to the oil and gas industry.
We offer the industry’s most complete portfolio of differentiated subsea technologies with
a global manufacturing and service infrastructure.
AKOFS Offshore is a global provider of vessel-based subsea well construction and intervention
services to the oil and gas industry. The company has a highly competent and diverse
organization, covering all phases from conceptual development to project execution and
offshore operations.
The company operates three modern vessels, the • A technological and operational platform well
AKOFS Seafarer, the Skandi Santos and the Aker suited for key leading clients
Wayfarer, which are designed to perform opera- • Extensive in-house expertise within subsea and
tions in up to 3,000 meters (9,800 feet) of water. in particular intervention / work over systems
• Integrates multiple services providers to
The AKOFS Seafarer is designed and equipped for increase efficiency reduce number of interfaces
riser-based deepwater well intervention opera- for client
tions. The Skandi Santos and the Aker Wayfarer • In depth know-how and experience with derrick
are subsea installation vessels that are installing / tower and module handling systems design
production equipment on fields in Brazil on 5 + 5 and operations including equipment for
year contracts with Petrobras. conveyance of wire line and coiled tubing
• Skandi Santos successfully operating in Brazil
AKOFS Offshore has the competence and equip- since 2010 and Aker Wayfarer commenced its
ment needed to provide superior deepwater oilfield Brazil operations January 2018
SEABED SURVEYS &
LIGHT INTERVENTION
services to leading oil and gas producers and • AKOFS Seafarer is the world’s first monohull
SEABED INSTALLATION subsea service providers around the globe. The deepwater riser based well intervention unit
LIGHT WELL INTERVENTION
company is well positioned for growth in the well • In November 2016 AKOFS Offshore entered into
intervention market and increased demand for a 50/50 joint venture with Mitsui O.S.K. Lines,
efficient installation of production equipment. Ltd (MOL) and Mitsui & Co., Ltd. (Mitsui) to
The main markets are in Brazil, West Africa, the create Avium Subsea AS
Gulf of Mexico and the North Sea. • Avium Subsea AS acquired the high-end subsea
vessel Skandi Santos, which is operated by
AKOFS Offshore in brief AKOFS Offshore on contract to Brazil’s national
• State-of-the-art subsea assets and vessels with oil company, Petrobras.
subsea intervention or well intervention topsides
Axess was established in 1998. The main office is in Molde, Norway. Axess currently
employs 280 people, of which approximately 150 are degreed engineers. The company is
growing and expanding the range of our service offerings. Axess has Norwegian branch
offices in Oslo, Bergen, Trondheim and Orkanger. Internationally we have offices in Singapore,
Rio de Janeiro, Aberdeen, St. Johns, Busan, Mumbai, Houston, Cape Town and Accra.
Benarx Solutions is one of the world leading companies in the application of Subsea Insulation
today, and we are able to provide the entire process from pre-engineering, method, planning,
application, third party testing and extensive documentation.
The Subsea insulation division combines their wide experience within the high performance
topside insulation product range with they unique cast method and expertise with the close
support from the innovative engineering department.
Benarx Solutions had their first Subsea insulation project back in 1998, and have worked on
tremendously inspiring projects internationally since 2001. We are established in Poland,
Singapore and South Korea with own entities and manufacturing facilities capable to approach
any type of project with high performance requirements.
Subsea Corrosion-Erosion
Monitor (CEM®) Pre-installable
version, first picture showing the
CEM without insulation, second
picture, CEM with insulation.
Third picture: Subsea Vibration
Monitor, stand alone version.
Cranemaster® is a world leader in the field of passive heave compensation and shock
absorption for offshore lifting operations. Cranemaster® units are mounted between the
crane hook and the load, expanding your vessel capabilities while protecting crane and
personnel. Since 1983, we have been increasing operational weather windows and operability
for customers worldwide. Cranemaster® units require a minimum of maintenance and
deck space and a large fleet of rental units for lifts up to 1400 tons are ready for immediate
dispatch. In addition, we develop tailor-made units and provide engineering services related
to lift analysis.
PRODUCTS SERVICES
CRE8 is a key partner with an unrivalled level CRE8 deliver innovative new technology to the
of service and support to our customers within market and is directly contributing to the success
engineering and production of Electro/Hydraulic of our customers objectives by using standardised
systems and services for both Topside and and modular technology. Our team has worked
Subsea applications. together for many years and is capable of executing
the most complex systems within our line of
Typical Products: business and our expertise includes:
• Intervention & Workover Control Systems
• Hydraulic Power Units • HSE-QA
• Subsea Control Modules Test Stand • Engineering and Studies
• Wellhead Control Panels • Design, Lay-out, Structural Calculations
• Local Control Panels • Project Management
• Test & Flushing HPU • Supply Chain Management
• Hydraulic & Electric Distribution Panels • Production Facilities
• Hydraulic Termination Panels • Testing Facilities
TREE SYSTEMS • X-mas Tree Instrumentation • Courses, Training
CONTROLS AND MEASUREMENT
• Umbilicals incl. Stab Connection Plates • Commissioning
• Hydraulic Accumulation Units
SELECTED REFERENCES
The CRE8 team is within it`s area the most
experienced in Norway and have references to
most of the large international Engineering and Oil
& Gas Companies.
CSUB (Composite Subsea) is a leading developer and manufacturer of subsea Structures and
Solutions. Since the first protection cover delivery in 1992, CSUB has been a dedicated GRP
manufacturer. Further expanding into Civil, Renewables and aquaculture markets has provided
CSUB with a wide basis of experience and to further improve optimisation and cost savings for
our customers.
CSUB consists of main offices in Arendal, and fabrication sites in Lithuania, Arendal and Bokn
(Haugesund). Having onsite management and engineering capabilities on all sites, CSUB gives
its clients options for optimisation for cost and lead times.
Deep C is a seabed intervention specialist, providing superior turn key solutions to meet
the needs of even the most demanding projects. Our capabilities are successfully
demonstrated through an impressive track record. Being a specialist, means that Deep C
offers solutions which combine the best of seabed intervention technologies, operational
know-how and in-depth engineering experties.
PRODUCTS SERVICES
• Deep C Subsea Utility Vehicle • Seabed Intervention
· Versatile and powerful tracked vehicle for · Levelling and precision dredging
dredging, subsea HP jetting, inspection and · Rock dump Removal
subsea tooling operations · Umbilical trenching
• Mass Flow Excavation · Free span rectification
· Deep C Blower · Spudcan preparations
· Deep C Jumbo Dredge · Boulder removal
• Dredging & Trenching · Drill cut transportation
· ROV Trenching · High pressure jetting
· ROV and diver operated dredges • Engineering
• Cutting & Jetting · Geotechnical assessment
· Diamond wire cutting · Remote intervention technology
SEABED SURVEYS & LIGHT
INTERVENTION · Subsea HP Jetting solutions · Operational procedures and methods
SEABED INSTALLATION • Equipment tool pool · Design and fabrication
PIPELAYING, PIPELINE REPAIR
· An extensive rental tool pool of ROV tooling
and subsea equipment REFERENCES
Shell, Subsea 7, Technip, EMAS, Saipem, Deep
Ocean, DOF Subsea, Bibby Offshore, Harkand
Group, Reach Subsea, Canyon Offshore, Nexans.
Djuvik produce and deliver quality products for the offshore market. Our company located
at the heart of Europe, provides services of highly experienced professionals, who work
with clients all over the world.
Djuvik was established 1992 and has produced HSE friendly polymer products for the
offshore industry since 1998. Since then we have gathered valuable knowledge within the
fields of the offshore industry, and today we possess world-leading competence and
technology within this area.
Our first WOR-clamps were produced in 2004, and have since had company from a line of
newer models. We work constantly to drive developments, and we are proud to always be
one step ahead. In a climate where time is money, we offer reliability. We make sure that
you, our customer, receive your wares on time. That is important both to us and you. We
also put a great deal of effort into making sure that every HSE-demand is met, and that you
as our customer can be assured of our products and your cooperation with us. We have
high expectations of ourselves, and are registered with, and approved by Achilles Norway,
and are currently certified according to ISO 9001:2015.
Driven by our purpose of safeguarding life, property and the environment, DNV GL enables
organizations to advance the safety and sustainability of their business. Operating in more
than 100 countries, our 13,500 professionals are dedicated to helping our customers in
the maritime, oil & gas, energy and other industries to make the world safer, smarter and
greener.
In the oil and gas industry, DNV GL enables safe, We provide the following services specifically within
reliable and enhanced performance in projects Subsea and Well, Pipeline & Risers:
and operations. We provide integrated services in
technical and marine assurance and advisory, risk • Qualification of new technology
management advisory and offshore classification. • Performance assurance
Our 5,500 people combine industry expertise, • Verification
multi-disciplinary skills and innovation to solve • Independent design analyses
complex challenges for our customers. Together • Quality surveillance
with our partners, we drive the industry forward by • Certification of material and components
developing best practice and standards across the • Integrity management
asset lifecycle. • Lifetime extensions and requalification
• Failure Investigation and Root Cause Analysis
PRODUCTS • Materials-, Coating and Corrosion testing in our
SUBSEA ENGINEERING
PIPELINE & RISER ENGINEERING Rules, Standards and Recommended Practices: sophisticated laboratories world wide
TECHNICAL SERVICES DNV GL has developed rules and standards • Flow assurance and sand management
for ships and the oil and gas industry: Example • Marine operations including marine warranty
DNV Rules for Planning and Execution of Marine services
Operations as well as associated Recommended
Practices. Digital solutions providing bid data analytics and
tools for optimizing operational efficiency.
SERVICES
Verification and Certification: We ensure our
customers’ projects are effectively managed
through risk-based verification and certification.
HSE Risk Management: We develop, implement,
maintain and continuously improve best
practices within SHE management.
Technology Qualification: We assist in providing
confidence that new technology will function
reliably.
Risk Management: We provide a complete view
of an organisation’s total risk exposure and help
manage these risks in an integrated way, both
operational and technical.
REFERENCES
Our customer portfolio ranges from major oil
companies such as Statoil, ConocoPhillips, Shell,
Total, and BP to major offshore EPCI supplier and
contractors.
DOF Subsea is a leading provider of integrated subsea solutions to the offshore oil and gas
industry around the world. Headquartered in Bergen, the company owns and operates one
of the largest global fleets of high-specification vessels, dive systems and ROVs, providing
specialist survey, subsea construction and inspection, repair and maintenance services
worldwide.
Our fleet currently stands at 27 owned vessels, 71 management, engineering, and fabrication. ROV/
ROV systems including 3 AUV/IIV system, and 10 ROTV operation, AUV & survey operation and
diving spreads. processing of data during vessel operation. Final
With close to 1,200 employees worldwide, DOF reporting, inspection and project close-out reports.
Subsea has a skilled and experienced team who
provide clients with a world-class capability to SERVICES
deliver project managed and engineered subsea • IRM
solutions. Our team’s ability to match services, • Mooring design and installation services
expertise, and equipment to the requirements of • Seabed survey
individual operations underpins our reputation for • Subsea metrology
safe, efficient and cost effective project delivery. • Pipeline and structure inspection
We have centres of operation in the North Atlantic, • Module Handling
Gulf of Mexico, Brazil, Asia, Mediterranean and • ROV and intervention services
SEABED SURVEYS &
LIGHT INTERVENTION West Africa with a skilled team including engineering, • Diving and intervention services
SEABED INSTALLATION project personnel, and marine crew. • Construction support
PIPELAYING, PIPELINE REPAIR
• Subsea engineering
Further info on: www.dofsubsea.com • EPCI Contractor services
FORCE Technology offers advanced solutions within a variety of industries, and is a leading
technological consultancy company built on years of experience with innovative development
and problem solving. We are an international company, with headquarters situated in
Denmark, subsidiaries in Norway, Sweden, China, Singapore, and the United Arab Emirates,
as well as branches in Australia and the United States. Our expansion is primarily the result
of a constant drive to support our customers in their own market place.
Freudenberg Oil & Gas Technologies (FOGT) is a global solutions provider of innovative
sealing solutions and differentiated sealing products to the oil & gas industry worldwide;
FOGT acquired Vector technology group in 2013. Our 500 associates serve a wide range of
customers including oil and gas operators, equipment suppliers, marine contractors,
equipment manufacturers (OEMs) and engineering/service companies for land based,
offshore and subsea applications.
Our core business is supplying cost-effective, MUDRISE™ - Subsea mud & slurry pumps for
compact and highly robust pumps that are mud-return, deep sea slurry and subsea mining
designed to avoid leakage-to-sea and function SEARISE™ - Subsea seawater pumps for dredging,
independently of any topside support system trenching and ejector applications
(“topside-less”).
SERVICES
We have delivered several subsea pumps to date, of Engineered pump solutions to fit the client’s need
which more than 40 pumps are in active use in the is our specialty. We also provide services including
deep seas. Our involvement in subsea pump qualifi- process and dynamic analysis.
cation projects includes the participation of a variety
of oil service companies and western oil majors. We engineer both positive displacement and
centrifugal pumping systems for subsea.
One of the key projects involves the world’s
SUBSEA PROCESSING
TOOLING/CONNECTORS first seal-less subsea process pump, Omnirise Our core competencies include:
miniBooster®. End users involved in qualifying this • Subsea rotating machinery and process
pump include Statoil, Total, Shell & Chevron. systems
• Marinization – Making rotary systems robust
PRODUCTS and reliable in the deep oceans
Key markets and applications include: • Material science
• Subsea process: Single & multiphase boosting, • Finite Element Analysis
chemical injection, water injection, active • Thermodynamics
cooling, filtration • Rotodynamics
• Subsea excavation: Deepsea dredging, • Computational Fluid Dynamics
trenching, mining & decommissioning • Tribology
• Subsea drilling: Deepsea cuttings transport,
drilling mud return, and drilling mud pressure REFERENCES
control Nexans
Oceaneering
Brand names: National Oilwell Varco
OMNIRISE™ BOOSTER™ - Subsea Seal-Less & Various European Oilfield & Offshore Drilling
Topside-Less pumps for subsea boosting and Systems Vendors
injection
OMNIRISE™ miniBooster™ - Subsea Seal-less &
Topside-less pumps for active cooling and
circulation applications
Hitec Products AS’ main business areas are high quality Electro-Hydraulic control systems,
Chemical Injection & Process Systems to the Oil & Gas Industry. We are a project oriented
organisation and our employees have a culture for succeeding and exceeding our clients
expectations. Our production facilities are in Stavanger, Forsand and Singapore, including a
deepwater quay and facilities for large module assembly. We are also present in Telemark,
Norway and Lowestoft, UK with sales and engineering offices.
SUBSEA FACILITIES
IKM Ocean Design AS is a company within the Engineering/Operations Division in the IKM
Group. We are the leading independent engineering company in Norway within SURF and
subsea field developments. Engineering has been IKM Ocean Design’s core
business since the company was founded in 1983. Over the last decade our services has
increased to include EPC of structures, SPS, control systems, flexible risers, umbilicals and
flow assurance.
IKM Ocean Design AS is a global provider of IKM Ocean Design has over the last years, worked
independent engineering services within develop- actively to develop improved and new cost-
ment and design of offshore and subsea fields, effective technical solutions for our Clients.
from feasibility and concept definition, through These are currently state of the art and important
conceptual, FEED and detail design, to follow-on improvements necessary to adapt to a market
and in-service engineering and construction/ situation where cost-reductions are paramount for
offshore support. the success of a project. Through participation in
JIPs to challenge current recommended practices,
Through Innovative and state of the art methods we pave the way for new technical solutions
and tools, we provide unique solutions to our within areas such as:
customers, always challenging proven technology • Pipeline Installation using RCM
to improve and develop new solutions. • Trawl Interaction
SUBSEA ENGINEERING
PIPELINE & RISER ENGINEERING • Dropped Objects and Protection Design
TECHNICAL SERVICES
AREAS OF EXPERTISE: • On-bottom Stability
RISERS, FLOWLINES & TIE-INS • Field Development and System Engineering • Geotechnical Engineering
• Subsea Pipeline Design • Cable Routing and Installation Engineering
• Subsea Structures and Tie-ins • Advanced FE Analysis
• EPC Contracts • Cap-X™ in-line manifold and direct tie-in
• Operational Support and Decommissioning
• Renewables REFERENCES
Johan Castberg Subsea Integration Pre-FEED &
SERVICES FEED (Statoil, 2016-2018): Engineering and
• System Engineering design for Johan Castberg flexible risers/topside
• Flowlines and Trunklines interface, rigid and flexible flowlines, DCFO cables,
• Cables/Umbilicals PRM grid, umbilicals, subsea structures and FOC
• Subsea Structures and Tie-in from shore. The work also includes options for
• Landfall & Receiving Facilities detail design, follow-on engineering and
• Advanced FE Analyses fabrication of structures. Detail design started in
• Riser Engineering May 2018.
• Topside Remote Retrofit Hot Tap EPC Projects (Statoil
• In-services Pipeline Assessments 2015-2018): Statoil awarded in 2015 two projects
• Materials and Corrosion for hot tap solutions for Gina Krog to 40” Zeepipe
• Flow Assurance IIA and Johan Sverdrup to Statpipe, performing
• CAD & GIS EPC services for the permanent hot tap equipment,
• Independent Verification i.e.; Retrofit Hot Tap Tee, Hot Tap Ball Valve
• EPC projects Structure, Hot Tap Gooseneck Spool including
• Project Management and Consultancy Anchor Clamp, Pressure Cap Assembly and
Auxiliary test and installation equipment.
IKM Subsea is an independent manufacturer and operator of ROV services to the rig, vessel
and global subsea industry. As part of IKM, a large multidiscipline sub supplier to the oil &
gas industry, we operate globally out of Bryne near Stavanger. We do have branch offices in
Aberdeen, UAE, Singapore and Malaysia.
IKM Testing is a company within the IKM Group and is a global multidiscipline supplier of
Mechanical Completion-, Pre-Commissioning- and Commissioning Services to onshore and
offshore Oil and Gas Industry. IKM Testing’s head office is located at Sola in Norway and
subsidiary companies have been establishet in 10 countries worldwide.
In the Subsea area Imenco delivers engineering services and develops, designs and
manufacture subsea lifting and guiding systems, guidewire systems, cathodic protection
retrofit solutions, ROV tooling, retro fit anode systems as well as subsea cameras, lights
and lasers.
Institute for Energy Technology (IFE) is an independent research institute for Life Science,
Energy and Nuclear Technology. The institute has a permanent staff of 650 and an annual
turnover of about 125 MUS$. Within petroleum technology IFE has expertise in multiphase
transport, corrosion control, tracer and reservoir, and human-digital interaction design.
More than 80% of the turnover is co-financed by industry and more than 50% is co-financed
by international clients.
SERVICES PRODUCTS
IFE is a research institution and as such delivers new Test facilities:
knowledge, methods and technology for our clients. IFE has advanced laboratories used for verification
IFE also deliver world class consultancy services testing and research.
when required by our clients. • Medium scale flow loop (Tomography)
• Wax loop
Within the SURF-area IFE’s Corrosion and Materials • Corrosion laboratories (H2S, CO2)
Technology Department serves the industry with • Tracer detection
corrosion mitigation testing for safe use of carbon • CO2 transport
steel in multiphase flow-lines with presence of H2S • Core scanning
and CO2. IFE delivers services for measurement of
liquid content of gas-condensate pipelines using Software:
TECHNICAL SERVICES
PRODUCTION SERVICES tracer technology. IFE has developed relevant software for 30 years
for the oil industry and has produced commercially
IFE provides research activities and consultancy valuable software such as OLGA that was
for: developed at IFE. Currently several products are
• Corrosion control in gas condensate pipelines under development ranging from environmental
using pH-stabilized glycol, load calculations (3DFloat) to reservoir
• Corrosion inhibitor qualification for high simulations (IORsim).
temperature or high H2S content service,
• Scale control in MEG regeneration systems SELECTED REFERENCES
• Measurement of liquid content of gas- • Top of line corrosion studies (Shell).
condensate pipelines. • Multiphase flow experimental work (Statoil)
• Wind-turbine and floating constructions design • Multiphase flow modelling work (Shlumnberger)
and optimization. With our partners we deliver • Tracer development and testing (Resman)
services on hydrodynamics, soil interaction and • Floating constructions design optimization (Olav
aerodynamics. Olsen)
• Multiphase flow instabilities and problem
solving
• Flow Assurance evaluation and testing (Wax,
Hydrate, Asphaltenes, Scale)
Corroded riser tensile armor Annular flow patterns Semi Submersible Wind Turbine
The Kongsberg Maritime Risers & Wellheads Department is a leading supplier of engineering
services for risers, umbilicals and wellheads. We offer specialist technical services for
design verifications, installation, commissioning and operational assistance. Asset life-
cycle services, including analyses, hardware and software monitoring solutions for well-
heads, risers and umbilicals, are key aspects of our integrity management offering.
With more than 30 years of experience gained base. The solutions include fatigue monitoring,
from more than 2500 Dynamic Positioning (DP) analyses and positioning advice for the drilling
systems in operation, Kongsberg Maritime has vessel (Riser Management System – RMS).
established itself as a pioneer and industry • Production Riser and Umbilical Integrity –
standard within the DP industry. Kongsberg conducting condition assessments and life
Maritime has for 20 years offered consultancy time extensions. Services include annulus
services within design and analysis of dynamic testing, life time extension reporting, mitigating
riser systems, subsea systems, offloading actions (inspection, repair, replacement), failure
systems and marine operations. The combined investigations and dissection. Our Annulus Vent
knowledge and experience brings unique services Monitoring System (AVMS) offers digital online
to our customers within design, analysis and monitoring of flexible risers.
operation of DP operated systems. • Marine DP Operations – including analyses,
operational guidelines and training. We
PIPELINE & RISER ENGINEERING
TECHNICAL SERVICES OUR SERVICES capitalise on Kongsberg Maritime’s DP expertise
• Field Development & Engineering Services – combined with engineering analysis. Riser
RISERS, FLOWLINES & TIE-INS
riser, wellhead and umbilical engineering. We analysis is a unique combination of training,
are currently taking part in several important simulation and expert advisory services.
field development projects in the Norwegian
Continental Shelf, e.g. Johan Castberg, Snorre OUR CLIENTS
Expansion and Njord Future. Our client list covers oil companies, contractors
• Drilling Solutions – securing safe and efficient and rig operators (drilling), including Statoil, Exxon,
operation of risers and wellheads by capitalising Chevron, Total, Shell, Suncor, Husky, Petrobras,
on the existing Kongsberg Maritime installed Aker, Aibel, Nexans, Prysmian.
footprint, unique competence and technology
From brownfield to greenfield and new frontiers, we apply our engineering technical
expertise, proven technology and innovative solutions to ensure you achieve and surpass
your exploration and production goals.
With more than 40 years of experience from oil & gas projects in Norway and all over the
world, Multiconsult possesses leading expertise in engineering, design and follow up of
offshore projects in general and more particular SURF installations.
Our expertise covers multidisciplinary engineering for advanced steel and concrete
structures as well as specialist services for offshore structures and floaters according to
NORSOK requirements.
Our specialized services within foundation engineering and arctic technology, comprising
cold climate engineering and offshore ice simulations, are recognized on a world class level.
The harsh climate along the Norwegian coastline and offshore in the arctic areas poses
challenges multiple challenges to all kinds of oil & gas installations. Multiconsult has been
heavily involved in challenging projects, driving the technology development in this area.
Neodrill is a partly Equinor owned company focused on the development and supply of the
CAN® technology for exploration and production oil and gas wells.
Founded in 2000, Neodrill has focused on tech- • SURF equipment is pre-installed onshore onto
nology for reducing cost and risk for exploration the wellhead, removing offshore installation risk
and production wells. Neodrill’s products are • The pre-installation of the flowbase equipment
backed by highly qualified engineering expertise prior to the rig arriving, enables spool metrology
and extensive experience from field operations. and tie in to be performed much earlier in the
This foundation helps make our products reliable project.
and ensures seamless integration with your • Accelerated production.
workflow to provide you with the highest possible • Risk reduction.
return. Selected companies and research institutes
are used to document our quality and produce test SELECTED REFERENCES:
results. All branches of the company are certified Nexen, Equinor, AkerBP, ENI, Siccar Point Energy,
to the ISO 9001-2015 standard. Endeavour, Lundin Norway, Centrica, Repsol, OMV,
The CAN-integrator contains the following key Woodside, Shell, Maersk oil, ConocoPhillips, Spirit
benefits: Energy.
SUBSEA FACILITIES
No Date Country Final Water Conductor Well
Inclination Depth Installation
[deg] [m] Method
1 2006 Norway N/A(1) 860 m Jetted (rig) Expl
2 2006 Norway N/A(1) 1100 m Jetted (rig) Expl
3 2009 Norway 0.40 370 m Toe-driven Expl
4 2010 Norway 0.86 270 m Drill/cement Expl
5 2012 Norway 0.35 250 m Drill/cement Expl
6 2012 Norway 0.45 125 m Drill/cement Prod
7 2012 Norway 0.90 125 m Drill/cement Prod
8 2013 Norway 0.50 340 m Drill/cement Expl
9 2013 Norway 0.42 1400 m Drill/cement Expl
10 2013 UK 0.67 140 m Drill/cement Prod
11 2014 Norway 0.42 1444 m Jetted (rig) Expl
12 2014 Norway 0.54 422 m Drill/cement Expl
13 2014 Norway 0.59 140 m Drill/cement Expl
14 2015 Norway 0.18 402 m CAN-ductor Expl
15 2016 Norway 0.32 1411 m Jetted (rig) Expl
16 2017 Norway 0.71 1200 m Drill/cement Expl
17 2017 Norway 0.34 120 m CAN-ductor Expl
18 2018 Australia 0.12 1495 m CAN-ductor Expl
19 2018 UK 0.20 1082 m CAN-ductor Prod
20 2018 Norway 0.13 450 m CAN-ductor Expl
SUBSEA FACILITIES
Norvalves is an innovative fast-track valve manufacturer, supplying the oil and gas
industry. In-house design, engineering and manufacturing allows us to produce and
deliver high quality, bespoke valves with marked leading delivery times.
TOOLING/CONNECTORS
Seabox AS, a part of National Oilwell Varco, provides solutions for subsea water treatment
for increased oil recovery. Through the patented Seabox™ subsea water treatment module
and SWIT™ technology seawater can be treated to any desired specification, including
low salinity, directly on the seabed. Our technology provides our customer with a flexible
approach to water treatment and injection. Unlimited access to seafloor provides space and
capacity for implementing water treatment with any capacity and water quality when and
where needed. The technology, enables a step change in reservoir and asset management,
accelerating production and increasing recovery. Total investments and cost of production
facilities will be significantly reduced.
Nymo is a full-service engineering, procurement and construction company within the oil &
gas and process industry. Nymo offers total solutions to customers and has earned
con- fidencefor versatility, reliability, quality service, timely delivery, good project
management and commitment to HSE excellence.
Nymo has extensive experience and expertise in approx 100 units are delivered mainly for the
fabrication of subsea facilities. Norwegian con- tinental shelf. Most known fields
delivered to are Troll Oil Province in the North Sea
PRODUCTS and Snøhvit Gas field in the Barents Sea. Detail
Our staff is well experienced in detail design, engineering is avail- able for structural and piping
procurement of materials, fabrication and testing disciplines. Special subsea platforms with depth
of complete units for seabed installation. The of 10 m and 30 m are available for submerged
fabrication skills include all relevant material testing. Overhead lifting capacity of 220 MT.
qualities used in subsea equipment.
SELECTED REFERENCES
Units delivered: Some major projects:
• Manifolds for multi well field developments • Tordis, EPC contract subsea manifold
• Satellite production wellhead frames • Snorre B, Fabrication of subsea manifold and
• Injection wellhead frames structures
SUBSEA FACILITIES
SUBSEA PROCESSING • Seabed compression unit • Troll Olje, Fabrication of 23 off manifolds, 5 off
• Tie-in spools riser bases and 5 off satellites
RISERS, FLOWLINES & TIE-INS
• Well jumper kit • Snøhvit, 6 off template manifold subsea
• BP Angola Block 18, Well jumper kit fabrication
SERVICES • Alvheim, Manifolds and Riser bases
Nymo has since 1990 fabricated subsea • Yme/Gjøa, subsea tie-in spools
struc- tures and piping systems for subsea • Bøyla, Manifold and structures
production and injection wells. In total number • Boa Manifold
The company was established in 2011 in with a global footprint. Ocean Installer is proud
Stavanger, Norway, by visionary individuals who to say that we have managed to quickly adapt
believed that clients deserved a tailored solution to new countries and new environments thanks
suited for their challenges not a one-size fits all to our commitment and ability to exceed client
approach. Furthermore, there was an opportunity expectations.
in the market for efficiency gain through being
an integrator rather than a leader in excellence SELECTED REFERENCES
within multiple industry segments. With this Our capabilities and achievements can best be
insight, the company was founded with a focus gauged by referring to some of the more typical
of asking clients what they really needed and not projects such as on:
only presenting a suite of services and products. • Draugen for Shell which involved 912 vessel
The integration model where Ocean Installer can days and exceeded 1 400 000 manhours, with
focus on its core competences of installation 550’ tons rock, 136 GRP covers, 18km flowlines,
engineering and execution and project manage- 21km umbilicals, 55 flying leads, 30 subsea tie-
SUBSEA ENGINEERING
PIPELINE & RISER ENGINEERING
ment services and adding the additional needed ins and 5 Draugen pull-ins, 1600 tons deployed
TECHNICAL SERVICES services through key partnerships, allowed the and 5 off 50+ ton units
RISERS, FLOWLINES & TIE-INS
company to retain lessons learned from previous • Johan Castberg for Statoil with installation
projects whilst providing the clients with only what of 10 integrated template structures, satellite
SEABED SURVEYS & LIGHT
INTERVENTION the client requires without having to maintain and structures and manifold modules. EPCI of 11
SEABED INSTALLATION develop costly internal assets. This plug-and-play vertical and 11 horizontal riser anchors, spools,
PIPELAYING, PIPELINE REPAIR
model was and is successfully being used by the pre-installation of 11 flexible risers, installation
company and has ensured that the company has of 12 static umbilicals, installation of flexible
stayed competitive in both good and bad times. flowlines, hydraulic jumpers and electric/fibre
optic FLs as well as pull-in of 11 risers.
PRODUCTS AND SERVICES • Askeladd for Statoil with installation of template
Ocean Installer chose partners that share our high structures with integrated manifolds, EPCI of 4
standards and stringent requirements with regard spools and protection covers and installation of
to efficiency, quality and safety. Developing a 42km umbilical and MEG lines.
reliable and comprehensive network of partners is • Ichthys for McDermott/Inpex with installation
an essential part of our growth strategy and allows and tie-in of flexible risers and flowlines as well
us to provide our clients with first-rate services as an umbilical between the two floaters
and equipment that meet their requirements in a • Moho for Total with subsea pump installation of
targeted manner. 300t, 7km umbilical including 70t termination head
From its start from zero, the company is today a and a topside lift of process control module
well-recognized provider of integrated Engineering, (200t) onto floater
Procurement, Construction, Installation expertise • Subsea Lines Modification Frame Agreement for
offering turnkey solutions in the following Statoil for replacement/installation of flexible riser,
segments: flowlines, tails and umbilicals on the Heidrun,
• Subsea structures, Umbilicals, Risers and Visund, Vigdis, Snorre, Troll, Njord, Åsgard,
Flowlines (SURF) Bauge, Fenja and Dvalin fields.
• Inspection, Repair and Maintenance (IRM) • Thunder Horse for BP with installation of water
• Survey injection umbilical and its termination head
• Diving • Gina Krogh for Statoil involving EPCI of PLEM,
• Trenching and rock dumping riser base, spools, protection covers and all
The company has expanded from its headquarter tie-ins
in Norway to also having offices in Aberdeen, • Liuhua 29-1 for COOEC with 3rd Party
Houston, Perth and Dubai. With work won and Verification and Endorsement Service for
executed in the North Sea, Mediterranean Sea, Subsea EPCI
Gulf of Mexico, South America, West Africa and
Oceania, Ocean Installer has become a company
PRODUCTS SERVICES
• Buoyancy: • Custom Design & Manufacture
· Mooring • Provide products from concept to completion
· Installation • Prototype to production runs
· Marking & Meteorological • Reverse engineering (including 3D scanning)
· Custom Buoyancy
· Pipe Floats SELECTED REFERENCES
· All depths • Nexans
• Cable & Flexible Protection: • Global Maritime
· Bend Stiffeners • Subsea 7 Norway
· Bend Restrictors • Ocean Installer
· Cable Protection • TechnipFMC
UMBILICALS & CABLES
RISERS, FLOWLINES & TIE-INS · Cable Ballast (ballasted plastic or cast iron) • DOF Subsea
· Wear Protection Elements • Deep Ocean
• Installation Aids & Ancillary Products:
· MudMats
· PipeMats
· SpacerMats
· Drill Riser Protection
· Piggy Back Clamps
PG Flow Solutions (Ing. Per Gjerdrum AS) has delivered innovative and tailor-made pump
solutions to the offshore and marine markets in more than 30 years. Based on pump
knowledge and experience, as well as high-quality sub-suppliers and numerous pump
start-ups and services, the Oslo-based company is expanding activities to cover worldwide
deliveries of a challenging and new subsea liquid pump solution.
REINERTSEN New Energy AS is a company supplying studies, FEED and detail engineering
projects to the Oil & Gas and industry.
REINERTSEN New Energy AS is an engineering secure handling of VNG Norge’s technical respon-
company, established by Torkild R. Reinertsen, sibilities as development operator in the FEED and
former owner and CEO of REINERTSEN AS. execution phase of the Fenja project.
The new company continues the proud 35-year
history with the oil and gas industry of Reinertsen, Ormen Lange Late Life Recovery (2017, ongoing)
delivering high-quality, product-independent services Client: Norske Shell AS
to the oil and gas companies. In addition to subsea, Engineering support to the Ormen Lange Late
pipelines and process plants, REINERTSEN New Life Recovery project in the Concept Select
Energy focus on clean energy solutions based on phase and involves further definition of selected
producing hydrogen from oil & gas, including capture, concepts to understand the key areas of risks and
storage and utilization of CO2. opportunities.
The Scope of Work includes field architecture,
Many of the most experienced engineers previously layout and routing, PRS cut and tie-in evaluations,
employed by Reinertsen have joined the new foundation, seabed intervention, installation and
company. In addition, several specialists from intervention support.
SINTEF, Statoil and other organizations have been
SUBSEA ENGINEERING recruited. Currently the organization include a staff of Ekofisk Water Injection (2017, ongoing)
PIPELINE & RISER ENGINEERING
35 senior engineers, all specialists within their field. Client: ConocoPhillips AS
SUBSEA FACILITIES Engineering Services related to the EKOVC water
SUBSEA PROCESSING PRODUCTS injection project and includes preparation of project
In cooperation with fabrication contractors, basis requirements and project specifications.
REINERTSEN New Energy provides EPC deliveries The work also comprises design document review,
of subsea facilities, including manifolds / design verifications and procurement support for
templates/ riser-bases/ protection structures/ CPI deliveries.
pipeline end terminations (PLEM/ PLET).
Browse Field Development (2017-2018)
SERVICES Client: Woodside, Australia
REINERTSEN New Energy provides Subsea/SURF Concept select phase Browse Field Development
services that include all parts from reservoir, well and included confirmation of technical feasibility of
systems, subsea production systems, subsea DEH for Calliance/Breaknock and Torosa subsea
infrastructure to the processing plant. The sub- flowlines. Furthermore, provision of sufficient
surface area is covered through a long-term equipment details, functional descriptions, weights
cooperation with Prores AS, located in the same and dimensions.
premises as REINERTSEN New Energy. Establish a Class 1 cost estimate (+30 / -20%).
• SURF engineering including PLEM, PLET, Identify any risks or opportunities associated with
Riserbase, subsea architecture and layout DEH systems for the Browse facilities.
• Subsea processing
• Reservoir & well Dual Pipe Separator (2018)
• Maintenance of subsea modules Client: Seabed Separation
• “Owners Engineering” Seabed Separation has developed the Dual Pipe
• The strategy includes workshop facilities that Separator (DPS) which introduces new technology
enable integration, testing and supply that makes oil separation more efficient. The
business effect will be especially significant
SELECTED REFERENCES subsea. RENE is currently designing the subsea
VNG Owners Engineer (2017 – 2021). station focusing on weight, layout, equipment
Client: VNG Norge AS requirements, and ease of installation. Weight
Frame agreement contract for the Fenja project optimization and installation method will be key
Owner’s Engineering Services. RENE provides factors with regards to overall cost.
engineering support and resources required to
Scan Tech serves the upstream oil and gas industry lifecycle from exploration to production
through the design & engineering of specialist equipment and provision of specialist
services including but not limited to Subsea Operations.
Our goal is to provide our customers with innovative • Advanced Subsea cutting techniques
and cost-efficient solutions and services, based on • Subsea Grit Blasting System
sound engineering, an uncompromising commit- • High Pressure Water Cleaners
ment to quality and unparalleled level of service. We • Decommissioning equipment SURF
combine our knowledge and experience in these
fields to provide products that set new standards in SERVICE:
the challenging and hazardous environments of the • Concept and FEED Studies for platform riser
marine and oil & gas industries. tie-in’s
• Offshore Platform riser tie-in operations.
SUBSEA PRODUCTS • Seabed intervention, rock removal, free span
• Platform Riser Tie-in equipment – Linear and correction, boulder removal, flowline & umbilical
drum winches, fairleads, HPU`s and operators. trenching, high pressure jetting for inspection
• Back deck equipment - HPU, winches, subsea • Life of Field - Inspection, Repair and
basket, cranes, etc. Maintenance
• Air Diving Spreads • Engineering, inspection and certification.
TOOLING/CONNECTORS • ROV`s and subsea tooling • ROV and Diving services
SEABED SURVEYS & LIGHT • Load Monitoring.
INTERVENTION
PIPELAYING, PIPELINE REPAIR
• Mass Flow Excavation - MultiROV and T-Tools. REFERENCES
• Dredging and Trenching- ROV and diver Please see our website for further details.
operated dredges.
PRODUCTS SERVICE:
SEABED INSTALLATION
PIPELAYING, PIPELINE REPAIR • ScanMachine – Subsea Excavators • Seabed preparation for installation and decom-
· The Scanmachine subsea excavator transfers missioning of subsea installations
proven land-based technology to the seafloor. • Subsea precision excavation for repairs, hot-
· The machines, which vary in size but share tapping, pile cutting and inspection
the same effective functionality, are tailored • Seabed intervention work like dredging, precision
to perform based on individual client scope, levelling/shaping, de-burial and backfilling
offering flexibility, power and precision • Rock removal/relocation/dump, drillcut, boulder
operations. and debris
• ScanROV – Subsea power and control module • Pipeline and cable remedial work such as
for a range of tooling deburial for maintenance and free-span
· Subsea Heavy Duty Grab (ScanROV GHD10) correction
– this 10ton of-the-shelf land-based grab, • Grouting removal
customized for subsea use by Scanmudring, • Drilling for blaster holes
is excellent for removal of large volumes. It
will have high capacities regardless of soil, REFERENCES
also in challenging material. Statoil, Shell, Aker BP, ConocoPhillips, Deep Ocean,
· Excavator mode (Scanmachine no 5) Subsea 7, Ocean Installer, Boskalis, Jan De Nul,
· Mass flow excavation Subsea 7, Bibby Offshore, Bluestream.
Shawcor is the global leader in the development and manufacture of pipe coating solutions
for the oil, gas, and water industries. Shawcor has more than 75 years of experience, over
27 pipe coating facilities on 6 continents and the largest team of technical and service
specialists in the business. Shawcor offers technologically advanced solutions for anti-
corrosion coatings, protective and weight coatings, thermal flow assurance coatings, internal
coatings, custom coatings and field joints for both onshore and offshore applications.
PRODUCTS
Our product range for Offshore Pipelines, Field
Joint and Subsea structures are: Anti Corrosion
Coatings, Concrete Weight Coating, Thermal
Insulation and Internal coatings.
SERVICES
Shawcor understands the offshore environment
and can provide complete coating solutions on a
global basis. As the leader in offshore pipe coating
solutions, the company offers many advantages
RISERS, FLOWLINES & TIE-INS
including:
SELECTED REFERENCES
Shawcor has supplied services to all major off-
shore markets in the world and some key projects
are: Åsgard, Gullfaks, Kristin, Tyrihans, Gjøa, Mars,
Europa, Madison, Marshal, Thunderhorse, Skarv,
Pluto, Bonga, Pazflor, Kizomba, Oseberg, Ormen
lange, Langeled, Blind Faith, Block 31, Mafumeira
Sul, In-Salah, Goliat, Skuld, Visund Sør/Nord,
Svalin, Åsgard Subsea Compression, Block 31,
Ormen Lange, Ivar Aasen, Snøhvit, Vigdis, Prelude,
Tordis Replacement, Aasta Hansteen, Goliat,
Marine Wave I and II, Shah Deniz and Maria.
Siemens Subsea is one of the leading solution providers of subsea electrical power and subsea
control infrastructure. Beyond subsea power and control infrastructure we also offer a world
Enabling Subsea leading portfolio in subsea connectors, subsea distribution and subsea sensors. Our extensive
subsea knowledge including a dedicated life-cycle management function and backed by
Processing by
Siemens expertise in onshore and topside electrification, automation and digitalization
Connecting
supports our clients throughout every phase of the development of the field.
Innovation with
Experience SUBSEA SYSTEMS for subsea electrical- and fibre optic connector
In response to the needs of the oil and gas solutions including:
industry, Siemens is delivering integrated subsea • DigiTRON: Subsea signal- and low voltage
electrical power- and subsea control infrastructure connectors
solutions to the market. These are key building • SpecTRON: Subsea medium & high-voltage
blocks for: connectors with ratings from 5 up to 45 kV
• Subsea processing (pumps / compressors) • ElecTRON: Wellhead instrumentation
• All Electric subsea field developments feedthrough
• Electrical pipeline heating (DEH / EHT) • Advanced Cable Terminations (ACT)
• High bandwidth open architecture subsea • Advanced Fibre Termination (AFT)
control
Siemens portfolio is constantly evolving and now
SUBSEA ENGINEERING
All Siemens subsea power- and control infra- also includes 45kV SpecTRON being the highest
CONTROLS AND MEASUREMENT structure solutions are developed and qualified rated wet mate connector in the market. The
SUBSEA PROCESSING
SUBSEA SUPPLY/POWER/ for operation down to 3000 meters. The portfolio DigiTRON family has been expanded with 3kV
DISTRIBUTION
TOOLING/CONNECTORS
shares a common philosophy including standard- solutions for longer step outs, and a new fibre
ized oil filled volume compensated design using optic wet mate connector (DigiTRONf). Another
modular and expandable building blocks to meet addition is the Advanced Converter & Switch (ACS)
the requirements of different fields. increasing field design flexibility by introducing
We have combined a strong R&D focus, expertise smart subsea jumpers.
in electrical engineering with strong marinization The portfolio also includes technically superior
knowhow to bring proven onshore solutions and subsea sensors, transmitters and instruments for
architecture to the seabed. monitoring subsea operations and conditions
The portfolio includes subsea transformers, • Wellhead Pressure Sensors (WEPS)
subsea distribution of low and medium voltage • Pressure Temperature (PT) sensors
power, subsea variable speed drives and subsea • Differential Pressure (DP) sensors for subsea
communication hub using open architecture applications
control philosophies. • Flow measurement
Through strategic acquisitions Siemens has the
largest in-house portfolio of subsea connectors, LIFE CYCLE MANAGEMENT:
penetrators and jumpers to provide a one-stop Siemens is fully backing its subsea commitments
shop for complete and integrated subsea electrical by offering qualified service technicians and
power and control infrastructure. exemplary service and support. Our strong global
presence with state-of-the-art facilities on four
SUBSEA PRODUCTS continents allows proximity to our customers and
Siemens has the largest portfolio in the market ensures that service needs are met locally.
SINTEF Ocean is a result of a merger between MARINTEK, SINTEF Fisheries and Aquaculture
and the department for Environmental Technology at SINTEF Materials and Chemistry from
2017. SINTEF Ocean performs research and innovation within maritime, offshore oil and gas,
renewable energy, aquaculture, biomarine and marine environmental technology for domestic
and international trade and industry. SINTEF Ocean is a company in the SINTEF Group, the
largest independent research organization in Scandinavia. SINTEF Ocean’s services are based
on a unique combination of theoretical knowledge, extensive laboratory facilities and
engineering expertise. SINTEF Ocean’s headquarters and laboratories are in Trondheim, Norway.
Right:
Full scale testing
of flexible risers,
umbilicals and power
cables in the Marine
structures laboratory.
Left:
High-Reynolds VIV test
rig in the Towing tank.
Sub Sea Construction deliver EPC (Engineering, Procurement, Construction) services for the
oil and gas industry. We are located on Sub Sea Base in Kristiansund and have direct quay
access to our facility.
Our ROV fleet is one of the largest and most RENEWABLES AND HEAVY LIFTING
advanced in the world, able to work in the deepest Renewables and heavy lifting comprises three
waters. By combining our cutting edge technologies specialist segments: the installation of offshore
with a diverse fleet of advanced vessels and highly wind farm foundations, heavy lifting operations for
skilled personnel, we provide engineered solutions oil and gas structures, and decommissioning.
that create real value for our clients through The step change in technology within the re-
integrated product and service packages. newables industry is allowing for larger and more
innovative installations. Broad marine management
and engineering capabilities are required to deliver
these projects. Our global presence and capability
to deliver services throughout the entire lifecycle
of these EPCI projects places Subsea 7 well in
supporting this industry as it develops.
TechnipFMC is a global leader in subsea, onshore/offshore and surface projects. With our
proprietary technologies and production systems, integrated expertise and comprehensive
solutions, we are transforming our clients’ project economics.
We are uniquely positioned to deliver greater efficiency across project lifecycles from
concept to project delivery and beyond. Through innovative technologies and improved
efficiencies, our offering unlocks new possibilities for our clients in developing their oil and
gas resources.
Each of our approximately 37,000 employees is driven by a steady commitment to clients
and a culture of purposeful innovation, challenging industry conventions and rethinking
how the best results are achieved.
To learn more about us and how we are enhancing the performance of the world’s energy
industry, go to TechnipFMC.com and follow us on Twitter@TechnipFMC.
TP Connectors (TPC) was established in April 2016 with the core business to design and
manufacture compact flanges and clamp connector products and associated seal rings of
the highest quality to the global oil and gas industry. The company was founded in collabo-
ration with Teknisk Produksjon AS (TP) in Drammen which has machined compact flanges
and clamp connectors since the late 1980’s. Highly experienced and technically skilled
personnel, together with TP’s vast experience in machining, makes TPC the ideal partner for
all your flange and clamp connection needs.
The engineering team consist of experienced
In addition to doing sales & marketing, design, engineers with capabilities of all kind of flange
development and project management of compact design and calculations including FEA of flanges
flanges and clamp connector supplies, TPC can and connectors structural capacity, functionality,
also undertake all kinds of special designs of SCF/ SAF and HISC. The Technical Manager of
sealing solutions based on Norsok L005, ASME TPC has participated in writing the NORSOK L-005
and API standards. The TPC associates are an and with the ISO 27509
innovative and experienced team with more than
thirty years in the oil and gas business. The engineering team of TPC designs tailor made
flanges for:
TPC serve a wide range of customers including oil • Offshore riser systems
and gas producing companies, original equipment • Offshore loading systems
TECHNICAL SERVICES
manufacturers and engineering and service • Subsea process & transport
TOOLING/CONNECTORS companies that provide technologies, equipment • Subsea containment, e.g electrical
RISERS, FLOWLINES & TIE-INS and services for producing oil and gas from land • Process industry for high temperature
based and offshore platforms throughout the • LNG
world.
TPC also offer the following services:
The TPC products and sealing technology are • Training courses including: Handling &
used in some of the most demanding applications Protection, Assembly/Disassembly, Bolting and
in oil and gas, including: offshore oil & gas Damage assessment.
platforms, FPSO’s, refineries, riser and swivel • Dimensional inspection at customers locations
applications, flowlines and subsea installations. or at TPC’s premises.
The featured products are the TPC Compact • Leak investigation: TPC can help by giving an
Flange, the TPC clamp connector and ROV assessment of leaks, and solving the leak issues
operated TPC Clamp Connector. • Damage assessment & repair management
• Leak reduction initiative: supervising during
Our partner, Teknisk Produksjon AS (TP) has fabrication, construction and commissioning
produced Compact Flanges since 1989. The with respect to leak reduction. Reducing leaks
TPC Compact Flange is designed to meet the leads to significant time saving, due to the
functional and design requirements of Chapter 4 reduction of repairs and modifications.
of NORSOK L-005. The TPC Compact Flange can
be delivered with IX, HX or Delta V-Seals. The TPC team is committed to design and
manufacturing the safest and most efficient
The TPC Clamp Connector design is based on flanged connections in the market. TPC’s core
established industry standards as referenced focus is on product quality and development, the
by NORSOK NMj1 and NMj3. The TPC Clamp recruitment and retention of highly trained and
Connectors are interchangeable with the competent personnel, continued improvement
equivalent type of connectors available on the and product installation support. In addition to its
market, and has been approved by Statoil. commitment to safety, reliability and technological
development, TPC continuously aims to excel in
order to meet or surpass its client’s expectation.
Trelleborg Offshore is a world leader in engineered polymer solutions that seal, damp and
protect critical applications in harsh and demanding environments. We have 120 years of
experience as well as dedicated and knowledgeable people providing performance at every
level. Trelleborg Offshore has a global presence with many class leading manufacturing
facilities around the world.
Since 1896 we have taken advantage of the well- To meet our customers’ needs, our cutting-edge
known rubber properties to evolve the company from solutions can be used for rigid risers, flexible
producing footwear into supplying highly engineered risers, flowlines, subsea structures, XMT,
products. Our competence has been reined into manifolds, jumpers, spools, tie-in structures and
advanced polymer technology, serving the worldwide insulation covers.
market with corrosion- and fire protection and We are highly experienced in developing tailored
thermal insulation together with moulded products. solutions combining the highest level of
performance and competitiveness and we are in
PRODUCTS AND SERVICES constant contact with our customers in order to
Thermal insulation is necessary to avoid formation of define their particular requirements.
hydrate plugs and wax build-up in subsea structures. The innovation process is conducted on three
The build-up begins when the oil or gas composition levels:
temperature is not maintained and begins to cool. • Basic know-how in the physics and chemistry of
SUBSEA FACILITIES
SUBSEA PROCESSING Without thermal insulation the cold seawater rapidly polymers
cools down the oil, forming hydrate or wax blockages • Experience and knowledge of polymers
RISERS, FLOWLINES & TIE-INS
making it impossible for a safe flow. applications
During shutdown the extra insulation gives sufficient • Design of products including production and
time for: Installation
• “Short time” inspection of the pipe or equipment
• Time to solve production problems SELECTED REFERENCES
• Time for methanol or glycol injection Bonga, Kizomba, Shah Deniz, Egina, Åsgard,
Oseberg, Johan Sverdrup, Martin Linge, Julimar,
Trelleborg Offshore Norway offers a range of Erha and Baobab.
materials for wet insulation systems worldwide:
Vikotherm R2 (Rubber) SELECTED END CUSTOMER REFERENCES
Vikotherm® S1 (Silicon) Statoil, Total, Aker BP, Shell, BP, Exxon, Chevron,
Vikotherm® P7 (Polyurethane - PU) Petrobras, Woodside and Petronas.
Vikotherm®G3 (Glass syntactic Polyurethane
– GSPU) SELECTED SPS/SURF CONTRACTORS
Vikotherm® PP (Polypropylene) TechnipFMC, Subsea 7, Saipem, NOV, OneSubsea
Vikotherm® PT (Polypropylene tape) and BHGE.
Wirescan AS provides products and services for diagnosis and condition assessment of
electrical cables, based on our patented technology LIRA.
The LIRA technology can be regarded as a tool for Risk Management, Cost Control, and
Asset Management for Cables and Umbilicals.
- By knowing the condition of your cables, you are able to handle faults and weaknesses in
a controlled matter, rather than having to fire fight when sudden severe incidents occur.
- You will also have the tool to prioritize which cables and umbilicals to repair or replace
during a budget period, based on your knowledge on their individual condition.
- Cables and umbilicals represent a huge value to the company, and should be part of the
Asset Management System. By using LIRA for frequent condition assessments, you will be
able to attach relevant data about the individual cable’s condition and development over
time, into the system.
PRODUCTS REFERENCES
Instruments based on the LIRA technology for Wirescan deliver products and services to a lot
doing Monitoring, Condition Assessments and of the main companies handling the cables and
Fault Location on Cables and Umbilicals. umbilical through their whole life cycle. Cable
Manufacturers, Installation companies, Service
TECHNICAL SERVICES SERVICES Providers and Oil&Gas Operators.
• Cable and Umbilical Diagnostics Among our customers are companies like Nexans,
• Cable and Umbilical Fault Location NKT, ABB, Technip, Shell, Total, BP, Statoil.
• Cable and Umbilical Monitoring
• Cable and Umbilical Condition Assessments
Oslo Stavanger
Hoffsveien 23, Prof. Olav Hanssensvei 7a
NO-0214 Oslo NO-4068 Stavanger
Norway Norway
Img: Aker Solution
+47 22 06 14 80 +47 51 87 48 80
Layout & design: Galston Design
NORWEP@NORWEP.COM
WWW.NORWEP.COM