Stream data:
WellHead: 264,152.64 kg/h
161 ºC
250 bar
%mole Composition
13.92% CO2
1.91% Nitrogen
73.59% Methane
1.99% Ethane
0.99% Propane
0.50% n-Butane
0.49% i-Butane
0.45% n-Pentane
0.44% i-Pentane
0.81% n-Hexane
4.91% H2O
0.00% n-Heptane
MEG01: 4 ºC
255 bar
%mole Composition
100.00% EGlycol
TEG01: 35 ºC
70 bar
%mole Composition
95.00% TEG
5.00% H2O
Equipment data:
2.27 pin/pout. Wellhead Choke (VLV-101)
5 bar. pressure drop. Safety valve (VLV-102)
5 bar. pressure drop. Safety valve (VLV-103)
Dehumidification. TEG
6 stages
69 bar. Top stage pressure
70 bar. Bottom stage pressure
Compressor
centrifugal
200 bar. Pout
Heat Exchanger
25 ºC. Seawater inlet
10 K. minimum pinch
Upload the simulation files and this Excel with the answer to following topics…
2 a) MEG mass flow required in the wellhead to avoid hydrate formation in the feed pipeline, in kg/h.
2 b) Dimensions of the two phase separater in the plant inlet area, in m.
2 c) TEG mass flow required in the Dehydration unit in order to obtain the 50 ppm_mol maximum water content requ
2 d) Dimensions of the dehydration column, in m
2 e) mimimum size of NG export pipeline, in mm of outer diameter
ghness calculation)
pipeline, in kg/h.