A Fluid is substance that can flow, like a Liquid or a Gas. The flow of a fluid can be represented
by Streamlines, which are 'fluid elements' that move relative to each other.
In Laminar Flow, all the fluid elements flow in the same direction, and none of the
streamlines cross over. It usually occurs at lower velocities and with streamlined objects. The
word 'laminar' means flow in layers, and it is as if there are layers of fluid sliding over each other.
In laminar flow, the 'layers' towards the middle tend to flow faster.
Turbulent Flow occurs at higher velocities or with non streamlined objects, when the flow
lines become chaotic and mixed up. Eddies - small whirlpools - form where the flow gets mixed
up.
2. Turbulent flow:
In turbulent flow occurs when the liquid is moving fast with mixing between layers. The speed of
the fluid at a point is continuously undergoing changes in both magnitude and direction.
3. Transitional flow:
Transitional flow is a mixture of laminar and turbulent flow, with turbulence flow in the center of
the pipe and laminar flow near the edges of the pipe. Each of these flows behaves in different
manners in terms of their frictional energy loss while flowing and have different equations that
predict their behavior.
Turbulent or laminar flow is determined by the dimensionless Reynolds Number.
Reynolds Number
The Reynolds number is important in analyzing any type of flow when there is substantial velocity
gradient (i.e. shear.) It indicates the relative significance of the viscous effect compared to the
inertia effect.
Re =
If a flow is such that the properties (velocity, pressure etc) at every point in the flow do not depend
upon time, it is called a steady flow.
In a flow if the properties are depends on time, such flow can be called as unsteady flow.
Compressible flows
in which the density of the fluid changes from point to point
the density is not constant for the fluid
Incompressible flows
in which the density of the fluid does not changes from point to point
the density is constant for the fluid
Rotational flow: A flow is said to be rotational if the fluid particles while moving in the direction
of flow rotate about their mass centers. Eg. Liquid in a rotating tank
Irrotational flow: The fluid particles while moving in the direction of flow do not rotate about their
mass centers. This type of flow exists only in the case of an ideal fluid.