KSRB 2.10 : Providing sand cement bed with 5% cement with a lead of
50 m. for all materials and lift of 1.5m. Machine mixed, laid in layers of
15cms. Thick and well compacted for foundation including curing cost
of materials labour and HOM complete as per specifications.
(Page No.- 9 Item No.- 2.17)
Providing and laying cement concrete using 20mm and down size
granite jelly of ready mixed concrete (RMC)for R.C.C works laid
in15cms thick layers and well compacted vibrating, curring, finishing
with necessary cement mortar, with all lead and lifts etc., complete
(exclisive of cost of steel and fabrication charges) ready mixed cement
concrete M-20(1:1.5:3) for raft foundation column footing,main and
secondary beams.
(Page No.- 22 Item No.- 4.48.2)
Providing and laying cement concrete using 20mm and down size
granite jelly of ready mixed concrete for R.C.C works laid
in15cms thick layers and well compacted including vibrating, curring,
including smooth finish in CM 1:3,with all lead and lifts etc., complete
(exclisive of cost of steel and fabrication charges) ready mixed cement
concrete M-20(1:1.5:3)
(Page No.- 22 Item No.- 4.49.2)
Providing and fixing pre cast solid concrete kerb stones made
out of CC 1:2:4 of size 450 × 200 × 400 mm and finished with CM
1:3 plasetring & finishing cutting etc., complete.
(Page No.- 28 Item No.- 5.29)
KSRB 7.3 : Providing and fixing 1mm thick M.S. sheet garage door
with frame and diagonal braces of size 40x40x6mm angle Iron, 3.15
mm thick M.S. Gusset plates at the junctions and corners, with
handles, stoppers and locking arrangements etc., including applying
a priming coat of red lead paint cost of materials, labour.HOM of
machinery complete as per specifications. Double leaf door of size
2.4x2.4m Specification No. KBS 7.9/7.12
(Page No.- 36 Item No.- 7.3)
KSRB 7.5 : Providing and fixing pull and push type rolling shutters
of approved make out of 18 guage, 75mm wide cold rolled steel
laths of convex corrugation,with side guides and bottom rail,
with interlocking arrangements for steel laths by means of
alternate clips, suspension shaft with high tension coil type springs
two numbers,mounted on specially desgned pipe shaft, with
bracket plates, guide channels,ball bearing arrangements, for
inside & Outside locking with push & pull operation complete
including pulling hooks,4Nos. Handles with all fittings and
accessries,painted with a coat of red lead paint(without top cover)
coat of materials,labour,HOM of machinery complete as per
specifications. Shutter size 3m x 2.8 m. Sp No. KBS 7.10/7.12
(Page No.- 34 Item No.- 7.5)
KSRB 7.6 : Providing and fixing top covers made out of 20 guage
M.S. Sheet over pull and push rolling shutters bent to shape including
cost of red lead primer coat painting, materals, labour,HOM of machinery
comolete as per specifications. SP No. KBS 7.10.6 / 7.12.
(Page No.- 35 Item No.- 7.6)
Providing and fixing M.S. grill work for windows and ventilators
weighing 21 kg/sqm using M.S. flats, or M.S. square rods, or
combination of M.S. flats and square rods as per approved
desing, drawing including cutting steel sections and welding
the same to required pattem with a coat of red lead primer,
cost of materials,fixtures, labour and HOM of machinery complete
as per specifications. Specification No. KBS 7.12
(Page No.- 38 Item No.- 7.9)
" SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm
thick factory made rigid foam Pannlled Door shutters made from
M.S. tube of 19gauge thickness, size 19x19mm fro styles and
15x15mm fro top & bottom rails, covered with heat moulded PVC
c' channel of 5mm thick sheet & 30 x 50mm wide to from styles
& 5mm thick & 75mm wide PVC Sheets for top rail, lock rail &
bottom rail on either side & 5mm thick20mm wide PVC sheet as
gap insert for top rail & bottom rail, panelling of 5mm thick PVC
sheet fitted in the M.S. Frame. Sealed to the styles & rails with
5x30mm PVC sheet beading on either side & joined together with
solvent cement adhesive etc., Complete as per manufactures
specification & direction of Engineer-in-charge fixed to frames
with 3 nos of 75mm Aluminium hinges.
(Page No.- 64 Item No.- 9.83)
KSRB 11-3 : Providing and fixing white vitreous china clay, water
closet indian type (Squatting pan) of size 580mm with footrests,
100mm S or P trap, (approved make ) cutting and making good
the wall and floor wherever required, including cost of materials,
labour complete as per specifications.
(Page No.- 75 Item No.- 12.3)
KSRB 11-5 : Providing & fixing white vitreous china clay, water
closet European type (pedestal type) with black solid plastic
seat and lid, C.P brass hinges, rubber buffers. 10 litre low level,
P.V.C flushing cistern (all approved make) with fittings,C.I /
M.S beackets, 40mm diameter fiush bend with fittings and
clamps, overflow arrangements with special and 25mm mosquito
proof coupling of approved degin, painting of fittings and
brackets, cutting cost of materials, labour complete as per
specifications. Specification No. KBS 11.
(Page No.- 85 Item No.- 12.5)
KSRB 11-15.1 : Providing & fixing 600x450mm bevel Lead edge mirror
of superior glass with 6mm hard board backing and fixing and fixed to
wooden cleats with c.P screws, washers, including cost of materials,
labour complete as per specifications.
(Page No.- 91 Item No.- 12.39)
KSRB 11-18-1.1 : Providing & fixing sand cast iron soil waste
and vent pipes 100mm dia with spun yarn soaked in cement
slurry and cement mortar 1:2 including cost of materials,
labour,testing complete as per specifications. KBS 11-1.10
(Page No.- 92 Item No.- 12.47)
KSRB 13-8.1 : Providing and fixing to wall, ceilling and floor, low
density polythylene pipes 6.00Kgf/sq.cm working pressur 20mm
outside diameter,with special flange compression type fittings,wall
clips. Making good the wall,ceiling and floor, including cost of
all materials, labour charges, HOM of equipments and testing
complete asper specifications. Specification No. KBS 13.2.15.1/13.9
(Page No.- 91 Item No.- 13.66)
KSRB 13-8.2 : Providing and fixing to wall, ceilling and floor, low
density polythylene pipes 6.00Kgf/sq.cm working pressur 25mm
outside diameter,with special flange compression type fittings,wall
clips. Making good the wall,ceiling and floor, including cost of
all materials, labour charges, HOM of equipments and testing
complete asper specifications. Specification No. KBS 13.2.15.1/13.9
(Page No.- 91 Item No.- 13.67)
KSRB 13-8.3 : Providing and fixing to wall, ceilling and floor, low
density polythylene pipes 6.00Kgf/sq.cm working pressur 32mm
outside diameter,with special flange compression type fittings,wall
clips. Making good the wall,ceiling and floor, including cost of
all materials, labour charges, HOM of equipments and testing
complete asper specifications. Specification No. KBS 13.2.15.1/13.9
(Page No.- 91 Item No.- 13.68)
KSRB 13-8.4 : Providing and fixing to wall, ceilling and floor, low
density polythylene pipes 6.00Kgf/sq.cm working pressur 40mm
outside diameter,with special flange compression type fittings,wall
clips. Making good the wall,ceiling and floor, including cost of
all materials, labour charges, HOM of equipments and testing
complete asper specifications. Specification No. KBS 13.2.15.1/13.9
(Page No.- 91 Item No.- 13.69)
KSRB 13-8.7 : Providing and fixing to wall, ceilling and floor, low
density polythylene pipes 6.00Kgf/sq.cm working pressur 75mm
outside diameter,with special flange compression type fittings,wall
clips. Making good the wall,ceiling and floor, including cost of
all materials, labour charges, HOM of equipments and testing
complete asper specifications. Specification No. KBS 13.2.15.1/13.9
(Page No.- 91 Item No.- 13.70.2)
KSRB 13-8.8 : Providing and fixing to wall, ceilling and floor, low
density polythylene pipes 6.00Kgf/sq.cm working pressur 90mm
outside diameter,with special flange compression type fittings,wall
clips. Making good the wall,ceiling and floor, including cost of
all materials, labour charges, HOM of equipments and testing
complete asper specifications. Specification No. KBS 13.2.15.1/13.9
(Page No.- 91 Item No.- 13.70.3)
KSRB 14.2 : Providing and laying flooring with burnt stone slabs
10 cms thick rough chistle dressed on cement mortar bed 1:6, 25mm
thick, and pointed with cement mortar 1:3. including cost of materials,
labour, complete as per specifications. Specification No. KBS 14.26
(Page No.- 96 Item No.- 14.1)
KSRB 14.6-1 : Providing & Laying heavy duty cobble stones
60mm thick interlock pavers, using cement and course sand for
manufacture of blocks of approved size, shape and colour with a
minimum compressive strength of 281 kg per sqm over 50mm
thick sand bed(average thickness) and compacting with plate
vibrator having 3 tons compaction force thereby forcing part of
sand underneath to come up in between joints, final compaction
of paver surface joints into its final level, including cost of
materials, labour and HOM of machineries complete as per
Specifications.
(Page No.- 112 Item No.- 14.6)
KSRB 14.12-4: Providing mosaic tiles flooring with white precast cement
mosaic tiles 20mm thick using marble chips of 7 to 10 nominal size laid
in floors and landing on a bed of 25mm thick average thickness of cement
mortar 1:6, mix, jointed with neat cement slurry mix with pigment to match
the shade of tiles, curing, rubbing, polishing, oxalic acid wash, wax polish,
including cost of materials, labour, HOM of machinery complete as per
specifications.
(Page No.- 100 Item No.- 14.27)
KSRB 15.1.6 : Providing raised and cut pointing to coursed stone masonry
with cement mortar 1:3, 20mm deep, after raking joints to depth
of 20mm nicely lining, including cost of materials, labour,curing.
complete as per specifications.
(Page No.- 106 Item No.- 15.5)
KSRB 15.1.6 : Providing raised and cut pointing to coursed stone masonry
with cement mortar 1:4, 20mm deep, after raking joints to depth
of 20mm nicely lining, including cost of materials, labour,curing.
complete as per specifications.
(Page No.- 106 Item No.- 15.6)
KSRB 15-5.1 : Providing rough cement plastering 15mm thick in single coat
with cement mortar 1:4, to brick masonry for base of dadooing works with sand
of approved quality, providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
(Page No.- 108 Item No.- 15.30)
KSRB 15-14.1 : Providing and applying two coats with oil bound
washable distemper of approved brand and shade on wall
surface including priming coat with distemper primer after
throughly brooming the surface free from mortar draops
and other foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour, complete
asper specifications.
(Page No.- 110 Item No.- 15.49)
KSRB 15-14.3 : Extra over Item 15-14.1 for applying oil bound
washable distemper on ceiling and / or sloping roof as per
specifications.
(Page No.- 110 Item No.- 15.49.2)
KSRB 15-14.3 : Providing and applying one coat with oil bound
washable distemper of approved brand and shade on wall surface
to give an even shade after throughly brooming the surface,
free from all grease,dirt,loose peases of scales, including
preparing the surface even and sand paper smooth, cost of
materials, labour, complete as per specifications.
(Page No.- 110 Item No.- 15.50.1)
KSRB 15-15.1 : Extra Over Item 15-14.3 for applying one coat
with oil bound washable distemper on ceiling and / or sloping
roof as per specifications.
(Page No.- 111 Item No.- 15.50.2)
KSRB 15-18.1 : Applying red lead ready mix priming coat over
new steel or other metal surface including preparing the surface
after throughly cileaning oil, grease, dirt, and other foreign matter,
and scoured with wire brushes, fine steel wool, sand papers
including cost of materials, labour, complete as per specification,
(Page No.- 132 Item No.- 15.73)
KSRB 24-6 : Extra for KSRB 24-5 cleaning and washing the old
ceiling and / or sloping roof with soap, soda and water including
cost of materials, labour, complete as per specifications.
(Page No.- 139 Item No.- 16.2.2)
KSRRB 300-3.2 : When lead is more than 60m upto 500m by any means
of conveyance including loading and unloading for all kinds of soils
except hard rock including cost of all labour complete as per specifications.
(Page No.-155 Item No.- 18.10)
KSRRB 300-7.5 : Extra for watering the earth to bring the earth
upto required optimum moiture content manually including cost
of all labour complete as per specifications
Specifications. Sp No. KRBS 300.5 MORT & H Specification No. 305.5
(Page No.-156 Item No.- 18.18)
KSRRB 300-7.6 : Extra for watering the earth to bring the earth
upto required optimum moiture content with mechinery including
cost of all labour, HOM of machineries complete as per
Specifications. Sp No. KRBS 300.5
MORT & H Specification No. 305.5
(Page No.-135 Item No.- 18.19)
Providing and laying liquid seal coat(Type A)as per clause 513
of MORT & H Sp.(IV revition) using granite stone chips consiting
of 0.09 cubic meter graded metal per 10 sq.mtr. As per table 500-3 of
MORT & H including applaying 80/100 grade bitumen binder at 9.8 kg
per 10 Sqmtr.by mechanical sprayer including heating bitumen sprayer
and sprading metal and rolling with a smoth wheeled roller 8-10
tonnes capacity including cost of all material,labour hire charges of
machinery etc. Complete.
(Page No.-144 Item No.- 20.19)
Removal of all failed material, trimming of copleted excavation to
provide firm vertical faces, cleaning of surface, painting of tack coat
on the sides and base of excavation as per clause 503, back filling the
pot holes with hot bituminous material as per clause 511, compacting
trimming and finishing the surface to form a smooth continuose
surface, all as per clause 3004.2 MORT & H
(bitumen = 0.00146, emulsion = 0.00024 Metal = 0.027)
(Page No.-145 Item No.- 20.23.1)
KSRRB 800-1 : Painting two coats after filling the surfsce with
syntheick enamel paint in approved shades on new plastered
concrete surfaces, with materials, labour, complete as per
specifications. Sp No. 800.3 MORT & H Sp No. 800
(Page No.-149 Item No.- 21.1)
Providing & laying reinforced cement concrete pipe NP3 750m dia for
culverts. Including pointing ends, and fixing collars with cement
mortar 1:2 including cost of all materials, labour,curing complete as
per specifications. Sp No. KSRB 1000,2300
MORT & H Specification No. 1000/2300
(Page No.-239 Item No.- 35.41)
Providing and fixing 4mm thick glass panes to steel windows including
T.W. beading of 10 mm thick and 2 coats of approved paints.
(Page No.-209 Item No.- 36.17)
Providing and fixing mortar and pestle stone with suitable size
of pastle stone including three line dressing for top two line
dressing for the exposed facecs.
(Page No.-210 Item No.- 36.30)
Providing and fixing mortar and pestle stone with suitable size
of pastle stone including three line dressing for top two line
dressing for the exposed facecs.
50cms x 50 cms x 60 cms
(Page No.-210 Item No.- 36.31)
Dismantling the tile work in floor and roof laid in cement or surki
mortar including stacking the materials with in 50m lead of tiles
thickness 10mm to 25mm.
(Page No.-212 Item No.- 36.51)
Dismantling plastering and removing the debris with a lead upto 200m.
(Page No.-212 Item No.- 36.52)
Quaring, breaking and collecting graded laterite metal with all lead
and lift loading and unloading etc., complete.
40-80mm size.
(Page No.-213 Item No.- 36.59.2)
Providing Granite slabs of selected quality rougly dressed & fixed
in cement mortar 1:8 including fixing, curing, etc., complete including
cost of all materials, labour with all lead, lift loading and un loading,
cost of conveancy etc., complete (7.50 cm to 10 cm thick granite slabs)
(Page No.- 243 Item No.- 36.6)
Providing and fixing 4mm thick glass panes to steel windows including
T.W. beading of 10 mm thick and 2 coats of approved paints.
(Page No.- 209 Item No.- 36.17)
ns provided
orner angls
C. columns
ce, providing
m floor level;
op panel with
17.3mm. With
o 15 microns,
st formation,
her stickly
e size holes
s of standard
cleaned free
having section
on weight 1.094
bottom member
ons provided
ation exterior
C to c; sections
viding frames
end with corner
o R.C.C. columns
ce, providing
And top panel with
x 17.3mm. With
o 15 microns,
e size holes
s of standard
cleaned free
2 x 44.45mm
4.45 thickness
hickness 3mm
8mm, weight
ted, opening
ories, such as
ket, 12mm
m x 17.3mm x
emoval of any rust
terials, fixtures,
1500