P a c k a g e s
One
step
ahead.
Quiet
Compact
Energy Efficient
1 Easy installation with 2 Room-saving, compact,
Aerzen’s forklift or pallet jack side-by-side installation
for placement
Generation 5
Delta Blower
The 5th generation of Aerzen
modular compact packages
combines tradition and
innovation.
Heavy
Drive Shaft Heavy-Duty No need for additional
Shaft Housing 7 electric motor and
Seal Three-Lobe interlocks with shaft-
Closed Rotors mounted cooling fan for
forced ventilation of the
enclosure
8 “Aerzen 10 Combi-Mount”
Discharge Silencer
eliminates the need
for absorption material
inside the silencer.
Oil
Lubrication
Built-in
Pulsation Timing
Cancellation Gears
Bearings Seal
Aerzen means
trouble-free
compression.
Aerzen’s modular blower packages have been offered
since the 1960s. Aerzen Delta Blower packages have been
in successful operation since the 1990s. They are just one
of the offerings in our single stage positive displacement Cover photo: Delta Blower Generation 5
Similar design available for gases other than air.
program. Whatever your application and installation
requirements, be sure to consider Aerzen.
G5 Delta Care Maintenance Agreement.
Warranty: 5 years optional with our G5 Care Maintenance
Agreement.
For Pressure
• Up to 15 psi: G5 Blower packages
• 10 to 51 psi: Oil-free and air-cooled
VM and VML screw compressors
For Vacuum (Dry)
• Up to 15 Hg: G5 Blower packages Aerzen USA Aerzen Canada
108 Independence Way Phone: (450) 424-3966
• Up to 25 Hg: G5 Blower packages Coatesville, PA 19320 www.aerzen.ca
with pre-inlet cooling
Phone: (610) 380-0244 E-mail: haerensa@aerzen.ca
• Up to 25.5 Hg: Oil-free and air-cooled Fax: (610) 380-0278
VM screw compressors at same flow Service Hotline: (800) 444-1692
(30% more efficient than PD blowers) Aerzen Mexico
www.aerzenusa.com
Phone: (728) 282-5508
• Vacuum boosters to 10-3 mbar absolute E-mail: inquires@aerzenusa.com
E-mail: ventosa@aerzen.com.mx
For Extended Pressure/Vacuum Atlanta: (770) 951-7035
• Up to 40,000 cfm available
Houston: (281) 980-6651
• For other gases, higher pressure /
vacuum consult factory
Aeromat Start-Up
Instrumentation Unloading Valve
Standard filter (Optional)
maintenance indicator Allows startup of the main
and p2 gauge motor with no load. The
valve is completely self
Belt Guard activating and does not
Designed for easy need any auxiliary
access to the drive. electrical or pneumatic
OSHA standard. power source.
Discharge Manifold
With integral full bore
check valve for low
pressure drop. The
check valve can be
inspected without
disconnecting the
piping.
Vibration Discharge
Isolating Mounts Flexible Connector
Hinged Motor Plate Rubber-type. Located Reinforced rubber.
Steady alignment and under the supporting Downstream of
consistent tension provided Reactive Discharge “Aerzen 10 base. No special discharge silencer to
by the motor weight. No Combi-Mount Silencer” foundation required. reduce transmission of
springs needed. Constant Machined support surface for blower. structure-borne noise.
high efficiency. Stiff for installation on vibration isolating
mounts. Low pressure drop design.
No absorption packing material.
ATEX spark arrestor.