ideapad 330-14IKB
ideapad 330-15IKB
ideapad 330-14AST
ideapad 330-15AST
ideapad 330-15IKB Touch
User Guide
Read the safety notices and important tips in the
included manuals before using your computer.
Notes
• Before using the product, be sure to read Lenovo Safety and General Information
Guide first.
• The latest electronic compliance and environmental information are available
from the Lenovo compliance information Web sites.
- To view compliance information go to:
http://www.lenovo.com/compliance.
- To download environmental information go to:
http://www.lenovo.com/ecodeclaration.
• Some instructions in this guide may assume that you are using Windows® 10.
If you are using another Windows operating system, some operations may be
slightly different. If you are using other operating systems, some operations
may not apply to you.
• The features described in this guide are common to most models. Some
features may not be available on your computer or your computer may include
features that are not described in this user guide.
• The illustrations used in this manual are for Lenovo ideapad 330-15IKB unless
otherwise stated.
• The illustrations in this manual may differ from the actual product. The
screenshots of operating system are for reference only. Please refer to the actual
product.
Regulatory Notice
• For details, refer to Guides & Manuals at http://support.lenovo.com.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.
Lenovo
User Guide
Instructions and technical information in this manual are applicable to the following
Lenovo notebook computers unless otherwise stated.
i
Chapter 1. Getting to know your computer
a b
c d
1
Chapter 1. Getting to know your computer
b a
d
c
Note: The dashed areas indicate parts that are not visible externally.
Attention:
• Do not open the display panel beyond 170 degrees. When closing the display panel, be
careful not to leave pens or any other objects in between the display panel and the
keyboard. Otherwise, the display panel may be damaged.
2
Chapter 1. Getting to know your computer
3
Chapter 1. Getting to know your computer
Numeric keypad
Hotkeys
You can access certain system settings quickly by pressing the appropriate
hotkeys.
4
Chapter 1. Getting to know your computer
Enables/disables airplane
Mutes/unmutes the sound.
mode.
Decreases the volume
Enables/disables camera.
level.
Locks/unlocks the LCD
Increases the volume level.
screen.
Enables the external
Enables/disables
projector or dangles the
microphone.
external display.
Decreases display
Refreshes page.
brightness.
Enables/disables the touch Increases display
pad. brightness.
Note: If you changed the Hotkey Mode from Enabled to Disabled in the BIOS setup utility,
you will need to press the Fn key in combination with the appropriate hotkey.
5
Chapter 1. Getting to know your computer
6
Chapter 1. Getting to know your computer
7
Chapter 1. Getting to know your computer
ab c d e f g i jk
ab c d e g h i jk
a AC power Connects to the AC power adapter.
adapter jack
8
Chapter 1. Getting to know your computer
b Battery/Charging
status indicator
AC power Indicator status Meaning
adapter
status
Off The computer is in sleep mode or turned
off; The battery has more than 20%
charge.
Disconnected Solid amber The battery has between 5% and 20%
charge.
Fast blinking amber The battery has between 1% and 5%
charge.
Slow blinking amber The battery is being charged. When
battery charge reaches 20%, the blinking
color changes to white.
Slow blinking white The battery has between 20% and 80%
charge and is still charging. When the
Connected
battery reaches 80% charge the light will
stop blinking.
Solid white The battery has more than 80% charge,
charging will continue until the battery
is fully charged.
9
Chapter 1. Getting to know your computer
Notes:
• The combo audio jack does not support conventional microphones.
• The recording function may not be supported if third-party headphones or headsets are
connected, due to different industry standards.
Note: For details, see “Using memory cards (not supplied)” on page 13.
j Novo button When the computer is off, press this button to start the
System Recovery or the BIOS setup utility, or to enter the
boot menu.
k Power status
indicator
Indicator Indicator status Meaning
On (solid white) The computer is powered on.
Power status
Blinking The computer is in sleep mode.
indicator
Off The computer is powered off.
10
Chapter 1. Getting to know your computer
The first time you plug a USB device into a particular USB port on your
computer, Windows automatically installs a driver for that device. After the
driver has been installed, you can disconnect and reconnect the device
without performing any additional steps.
Note: Typically, Windows detects a new device after it has been connected, and then installs
the driver automatically. However, some devices may require you to install the driver
before connecting. Check the documentation provided by the device’s manufacturer
before connecting the device.
Before disconnecting a USB storage device, make sure your computer has
finished transferring data to that device. Click the Safely Remove Hardware
and Eject Media icon in the Windows notification area to remove the device
before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before
connecting it. Otherwise, the device may not be recognized.
11
Chapter 1. Getting to know your computer
a Dummy module
(on select
models)/hard
disk drive (on
select models)
Note: Some models are supplied with a dummy module. For some models, you can buy an
optical disc drive to replace the dummy module. For some models, you can buy an
optical disc drive or a hard disk drive to replace the dummy module.
Notes:
• Before purchasing any security product, verify that it is compatible with this type of
security keyhole.
• You are responsible for evaluating, selecting, and implementing the locking devices and
security features. Lenovo offers no comment, judgment, or warranty regarding the
function, quality, or performance of locking devices and security features.
12
Chapter 1. Getting to know your computer
13
Chapter 1. Getting to know your computer
Note: Make sure that none of the ventilation slots are blocked, or else overheating of the
computer may occur.
14
Chapter 2. Starting to use Windows 10
15
Chapter 2. Starting to use Windows 10
The power button is on the Start menu. Select it and you can choose to shut
down or restart the computer, or put the computer into sleep mode.
Through the Start menu, you can locate all the installed apps or view the
frequently used apps.
16
Chapter 2. Starting to use Windows 10
From the ACTION CENTER, you can examine important notifications from
Windows and your apps. Moreover, you can change common settings
quickly.
17
Chapter 2. Starting to use Windows 10
To switch between desktops, click the Task View icon , then select your
desired desktop.
18
Chapter 2. Starting to use Windows 10
Note: Put your computer to sleep before you move it. Moving your computer while the hard
disk drive is spinning can damage the hard disk, causing loss of data.
19
Chapter 2. Starting to use Windows 10
• Right-click the Start button in the lower-left corner and select Shut down or
sign out Shut down.
20
Chapter 2. Starting to use Windows 10
21
Chapter 2. Starting to use Windows 10
22
Chapter 3. Recovery system
23
Chapter 3. Recovery system
Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, first
check the installation program on the D partition of your hard disk (for
select models, on the C partition). If you cannot find the drivers for all the
hardware devices that you need there, download the drivers from the
Lenovo consumer support website.
Note: The Lenovo support web site contains the latest drivers.
24
Chapter 4. Troubleshooting
Finding information
What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your
computer contains safety precautions for using your computer. Read and
follow all the precautions when using your computer.
Where can I find the hardware specifications for my computer?
You can find hardware specifications for your computer from within the
Companion (or Lenovo PC Manager) app.
Where can I find warranty information?
For the warranty applicable to your computer, including the warranty
period and type of warranty service, see the Lenovo limited warranty.
25
Chapter 4. Troubleshooting
Getting help
How can I contact the customer support center?
See “Chapter 3. Getting help and service” of Lenovo Safety and General
Information Guide.
26
Chapter 4. Troubleshooting
Troubleshooting ---------------------------------------------------------------
Display problems
When I turn on the • If the screen is blank, make sure that:
computer, nothing appears - The AC power adapter is connected to the
on the screen. computer, and the power cord is plugged into a
working electrical outlet.
- The computer power is on. Press the Power key
again for confirmation.
• If these items are set correctly, and the screen remains
blank, have the computer serviced.
When I turn on the • Restore backed-up files to your Windows
computer, only a white environment or the entire contents of your hard disk
cursor appears on a blank to its original factory contents using the Push-button
screen. reset. If you still see only the cursor on the screen,
have the computer serviced.
The screen goes blank • Your power management is enabled. Perform the
while the computer is on. following to resume from sleep mode:
- Press any key on the keyboard.
Sleep problems
The critical low-battery • The battery power is getting low. Connect the AC
error message appears, power adapter to the computer.
and the computer
immediately turns off.
The computer enters sleep • Make sure that:
mode immediately after - The battery is charged.
Power-on. - The operating temperature is within the acceptable
range. See “Chapter 2. Use and care Information” in
the Lenovo Safety and General Information Guide.
Note: If the battery is charged and the temperature is within range, have the computer
serviced.
27
Chapter 4. Troubleshooting
The computer does not • If your computer is in sleep mode, connect the AC
return from sleep mode and power adapter to the computer, then press the Power
the computer does not button.
work. • If the system still does not return from sleep mode,
your system has stopped responding, and you cannot
turn off the computer; reset the computer. Unsaved
data may be lost. To reset the computer, press and
hold the Power key for eight seconds or more. If the
computer still does not reset, remove the AC power
adapter.
Display panel problems
The screen is blank. • Do the following:
- If you are using the AC power adapter or the
battery, and the battery status indicator is on, press
F12 ( ) to make the screen brighter.
- If the power indicator is blinking, press the Power
key to resume from sleep mode.
- If the problem persists, follow the solution in the
next problem “The screen is unreadable or
distorted.”
The screen is unreadable or • Make sure that:
distorted. - The screen resolution and color quality are correctly
set.
- The monitor type is correct.
Incorrect characters appear • Is the operating system or programs installed
on the screen. correctly? If they are installed and configured
correctly, have the computer serviced.
Sound problems
No sound can be heard • Make sure that:
from the speakers even - The Mute function is off.
when the volume is turned - The combo audio jack is not being used.
up. - Speakers are selected as the playback device.
28
Chapter 4. Troubleshooting
Battery problems
Your computer shuts down • Recharge the battery.
before the battery status
indicator shows empty.
-or-
Your computer operates
after the battery status
indicator shows empty.
Other problems
Your computer does not • To turn off your computer, press and hold the Power
respond. key for eight seconds or more. If the computer still
does not respond, remove the AC power adapter.
• Your computer might lock when it enters sleep mode
during a communication operation. Disable the sleep
timer when you are working on the network.
The connected external • Do not connect or disconnect any external device
device does not work. cables other than USB while the computer power is
on. Otherwise, you might damage your computer.
• When using high power consumption external
devices, such as an external USB optical drive, use an
external device power adapter. Otherwise, the device
may not be recognized, or the system may shut down
as a result.
29
Appendix A. CRU instructions
CAUTION:
Set the built-in battery in Ship Mode before replacing a CRU or sending your
computer for service.
• Turn off the computer and disconnect the AC adapter.
• Press Fn + S + V.
• Press the Power button to verify if Ship Mode has been set.
Note: When set in Ship Mode, the battery does not supply power to the computer. To awake
the battery from Ship Mode, connect the AC adapter to your computer.
30
Appendix A. CRU instructions
31
Appendix A. CRU instructions
4 Gently pull the optical drive/hard disk drive out from its cavity b.
5 Insert a new optical drive/hard disk drive and tighten the screw to secure
the optical drive/hard disk drive.
6 Turn the computer over again.
7 Connect the AC power adapter and the cables to the computer.
32
Appendix A. CRU instructions
The following table provides a list of CRUs for your computer, and informs
you of where to find replacement instructions.
Self-service CRUs
AC power adapter ×
33
Trademarks
Lenovo
34
©Lenovo China 2018
Rev. AA00
en-US