Problem 5.20
Calculate the ultimate axial load capacity of a rectangular column 350mm x 450mm reinforced
with six 25mm bars. Use fy = 345 MPa and f’c = 28 MPa.
Problem 5.21
Design a square tied column to support an axial dead load of 900 kN and an axial live load of 1240
kN. Use fy = 414 MPa and f’c = 27.6 MPa. Assume 2% steel ratio and use 28mm main bars and 10 mm ties.
Problem 5.22
Problem 5.23
Calculate the ultimate axial load capacity of a 480 mm round spiral column reinforced with six
22mm bars. Use fy = 345 MPa and f’c = 34 MPa.
Problem 5.24
Design a round spiral column to support an axial dead load of 950 kN and an axial live load of 1210
kN. Use fy = 414 MPa and f’c = 21 MPa. Assume 2% steel ratio and use 28mm main bars and 10 mm spiral.
Use 30 mm steel cover.
Problem 5.25
Repeat PROBLEM 5.24 using 5% steel ratio. 25 mm longitudinal bars, and 12 mm spiral.
Problem 5.27
Concrete strength f’c = 21 MPa. Use 25-mm-diameter longitudinal bars (fy = 415 MPa) and 12-mm-
diameter ties (fyb = 275 MPa). Clear protective covering is 35 mm. Use 2% steel ratio. Use 2001 NSCP.
Problem 5.22