17.1/2" hole would be drilled and a 20" x 13.3/8" casing string run. There would be one joint of 20" casing XO to 13.3/8". The HPWHH would be welded to the 20" casing joint onshore. The HPWHH would be landed and locked inside the
Assumed temperature gradient is 10 C
per 100ft BML.
13.3/8" set at +/= 3,900 ft TVD to
seal off sands between 3,300 ft and 3,800 ft that are prone to loss circulation. Cement with a low density cement slurry. Temperature at 13.3/8" shoe 380 C . Seabed temperature 40 C .
9.5/8" casing set at +/- 8100 ft. Predicted kick
tolerance would not be sufficient to drill the overpressured formations (which may contain hydrocarbons) in 12.1/4" hole to TD (See Kick Tolerance spreadsheet). Temperature at
7" liner should be set across the
overpressured formations (with an overlap of +/- 250 ft insided 9.5/8" casing) to allow MW to be reduced before drilling potential reservoir in 6" hole.