52SS Page 1
A faulty air flow sensor will set code 23 in the on-board diagnostic system. Refer to the schematic diagram and test the sensor with the diagnostic chart.
If an air flow sensor that is incorrect for the vehicle model is installed, code 49 will set (whether the sensor itself is faulty or not). Automatic
transmission models use a hot film type air flow sensor and manual transmission models use a hot wire type. These are not interchangeable.
L: Blue
B: Black
Y: Yellow
G: Green
R: Red
W: White
Br: Brown
Lg: Light green
Gr: Gray
1. With ignition "ON," measure voltage across ECU connector terminals and ground as follows:
(B48)8-(B1)1 0 Ohm
(B48)9-(B1)4 0 Ohm
(B48)10-(B1)2 0 Ohm