Anda di halaman 1dari 2

1.

Using Ampere’s circuital law, derive an expression for magnetic field along
the axis of a Toroidal solenoid?

2. A circular coil of 16 turns and radius 10 cm carrying a current of 0.75 A rests


with its plane normal to an external field of magnitude 5.0 x 10-2 T . The coil is
free to turn about an axis in its plane perpendicular to the field direction. When
the coil is turned slightly and released, it oscillates about its stable equilibrium
with a frequency of 2.0 s-1 . What is the moment of inertia of the coil about its
axis of rotation?

3. A particle of mass m and charge q moving with a uniform speed v normal to


a uniform magnetic field B describes a circular path of radius & Derive
expressions for (1) Radius of the circular path (2) time period of revolution (3)
Kinetic energy of the particle?

4. a) Obtain an expression for the torque acting on a current carrying circular


loop.
(b) What is the maximum torque on a galvanometer coil 5 cm 12 cm of 600
turns when carrying a current of 10-5 A. in a field where flux density is 0.10
Wb/m2 ?

5. A telephone cable at a place has four long straight horizontal wires carrying
a current of 1.0 A in the same direction east to west. The earth's magnetic field
at the place is 0.39 G, and the angle of dip is 350. The magnetic declination is
nearly zero. What are the resultant magnetic fields at points 4.0 cm below the
cable?

6. Obtain an expression for the self inductance of a long solenoid? Hence


define one Henry?

7. A conducting rod rotates with angular speed w with one end at the centre
and other end at circumference of a circular metallic ring of radius R, about an
axis passing through the centre of the coil perpendicular to the plane of the
coil A constant magnetic field B parallel to the axis is present everywhere.
𝟏
Show that the emf between the centre and the metallic ring is 𝟐 𝑩𝒘 𝑹𝟐 .

8. An a.c. voltage E = Eo sin wt is applied across an inductance L. obtain the


expression for current I?

9. A rectangular wire loop of sides 8 cm and 2 cm with a small cut is moving


out of a region of uniform magnetic field of magnitude 0.3 T directed normal to
the loop. What is the emf developed across the cut if the velocity of the loop is
1 cm/s in a direction normal to the (a) longer side, (b) shorter side of the loop?
For how long does the induced voltage last in each case?

10. In a step up transformer, transformation ratio is 100. The primary voltage is


200 V and input is 1000 watt. The number of turns in primary is 100. Calculate
(1) Number of turns in the secondary
(2) Current in the primary
(3) The voltage across the secondary
(4) Current in the secondary
(5) Write the formula for transformation ratio?

Anda mungkin juga menyukai