Coupling hubs shall be installed according to the OEM specs. coupling hubs runout max =0.05 mm TIR coupling hub perpendicularity to the center of rotation max =0.05 mm TIR Soft foot with piping disconnected max =0.05 mm Shaft runout = 0.05 mm TIR Mechanical seal locking tabs disengaged DBSE should be as specified ±0.25 mm or less
Alignment recommended hints
The shim material should be stainless steel
Max number of shims under one support foot = 5 shims
The shim stack height shall not exceed 12 mm
One shim 3 mm thick or thicker shall be used
Shims numbers and total thickness should be recorded
Shims shall not extend outside the machine support foot edges.
Undercut hold down bolts are not permitted.
Hold down bolts shall not be bolt bound.
For centrifugal over hung pumps, the bearing bracket support shall be loosened during the whole alignment process and pipe strain check
Ersatzteilliste Typ 41-23 Spare Parts List Type 41-23 Pièces de Rechange Type 41-23 Lista Dei Pezzi Di Ricambio Tipo 41-23 Lista de Repuestos Tipo 41-23