Basic Application
Press ON/OFF
Wait for Laser Slow Fast
beeping Solid beep beeping
Shock-Mode Deactivation:
1. Press ON/OFF 3. Press Shock-Mode button to
deactivate Shock-Mode
2. Shock-Mode activates
4. LED indicates Shock-Mode is
automatically after 1 minute
deactivated
3. If rotator is bumped, laser
stops rotating and all LEDs
activate
4. Use + / - keys
1. Use the target to set the desired
to aim & align 2. Press inclination
tool to the ON/OFF
desired slope
1. Set Slope as
shown above When tool is aligned,
press e-Targeting key to
2. Press e- exit and start working
Targeting key with set slope.
* Read the operating instructions before the tool is used for the first time