Anda di halaman 1dari 13

Magnetic Sensors

Line Guide
You know us as a leader, whether you’ve known us as MICRO circuits, responding to the presence or the interruption of a
SWITCH™ or Honeywell Sensing and Control (S&C). In 1968, magnetic field by producing a proportional output. Gear-tooth
we revolutionized the industry with the first solid-state keyboard and other packaged Hall-effect speed and direction sensors
combining Hall-effect sensing and associated electronics in sense movements of a ferrous metal target. Digital and analog
a single circuit. Today, the Honeywell S&C family of magnetic “sensor-only” devices are operated by a permanent magnet
position sensors includes digital and analog Hall-effect position, or electromagnet, while actuation mode depends on the type
magnetoresistive digital, Hall-effect vane, gear-tooth, and Hall- of magnets used. A vane passing through a gap or a magnet
effect basic switches and magnets. These high-speed, extended mounted on a plastic plunger operates integral magnet position
life sensors are often directly compatible with other electronic sensors.

FEATURES
1st level hall-effect and surface-mount (SOT-23 and SOT-89) Benefits: Supplied in three different
sensors - DIGITAL packages • Cost effective magnetic sensitivities to meet wide range
SS30AT/SS40A/SS50AT. of potential applications. The SS341RT and
Benefits: Enhanced sensitivity often allows
Features: Bipolar magnetics • Sinking SS441R offer the highest sensitivity, with
for use of smaller, less expensive magnets.
output • High output current capability a typical operating point of 85 G at 25 °C
Built-in pull-up resistor easily interfaces with
• High speed capability • Reverse [77 °F]; the SS343RT and SS443R offer
common electronic circuits without adding
polarity protection • Small through-hole medium sensitivity with 125 G typical at
external components, helping to reduce
and surface mount (SOT-23 and SOT-89) 25 °C [77 °F]; the SS349RT and SS449R
total system cost. 2.7 Vdc to 7 Vdc supply
packages • Tape and reel available offer the lowest sensitivity, requiring 350
voltage range allows use in low voltage
G typical to operate at 25 °C [77 °F]. The
Benefits: Integrated circuitry provides applications, promoting energy efficiency.
SS340RT’s small size requires less PC board
enhanced temperature stability in a robust Subminiature package size (SS311PT)
space, allowing it to be used in smaller
design. Thermally balanced integrated allows for compact design. SS311PT is
assemblies. Its 3 V capability allows for
circuit over full temperature range. Built-in available on tape and reel for high volume,
use in low voltage applications, promoting
regulator provides stable operation over automated component placement, helping
energy efficiency. The SS340RT Series is
supply voltage range. Open-collector to reduce manufacturing costs. Potential
available on tape and reel (3000 units per
sinking output voltage easily interfaces with applications include speed and RPM
reel); the SS440R Series is available in a
wide variety of electronic circuits. Internal sensing, brushless dc motor commutation,
bulk package (1000 units per bag). Potential
circuitry prevents sensor damage in case tachometer, counter pickup, motor and
applications include door or lid closure
supply voltage polarity is accidentally fan control, flow-rate sensing, and robotics
detection, speed and RPM sensing in fitness
reversed. Potential applications include control.
equipment, flow rate sensing, damper or
speed and RPM sensing, brushless dc
valve position control, cylinder position
motor commutation, motor and fan control, SS340RT/SS440R Series.
monitoring, float-based fluid level sensing
magnetic encoding, disc speed, tape Features: Unipolar magnetics: SS340RT
and printer head position sensing.
rotation, and flow-rate sensing. responds to North pole; SS440R responds
to South pole • Subminiature package size
SS351AT/SS451A.
SS311PT/SS411P. (SS340RT) • Multiple magnetic sensitivities
Features: Omnipolar magnetics
Features: Bipolar magnetics • Enhanced (high, medium and low) • Low voltage
• Subminiature package size (SS351AT)
sensitivity • Built-in pull-up resistor • Low 3 V capability • Built-in reverse polarity
• Simple activation from either South pole
voltage: 2.7 Vdc to 7 Vdc • Subminiature protection • Thermally balanced integrated
package size (SS311PT) • Through-hole circuit over full temperature range
continued on page 1
www.honeywell.com/sensing 9
Magnetic Sensors Line Guide

Precision. Repeatability.
1st level Hall-effect
Ruggedness. sensors - digital
Each Honeywell S&C magnetic SS30AT/SS40A/SS50AT SS311PT/SS411P
position sensor is engineered
to provide top performance: low-cost bipolar Hall-effect digital low-cost, bipolar hall-effect digital position
Description
Hall-effect sensors are position sensor sensor with built-in pull-up resistor
constructed from a thin sheet of Magnetic actuation type bipolar bipolar
conductive material with output SS30AT: plastic surface mount (SOT-
connections perpendicular to 23)
SS311PT: plastic surface mount (SOT-23)
Package material and style SS40A: plastic radial lead
the direction of current flow. SS411P: plastic radial lead
SS50AT: plastic surface mount (SOT-
Magnetoresistive sensors 89B)
have a built-in magnetoresistive Supply voltage range 4.5 Vdc to 24 Vdc 2.7 Vdc to 7 Vdc
bridge integrated on silicon, Supply current 10 mA max. 14 mA max.
encapsulated in a plastic Output type digital sinking digital sinking
package. The sensitive
SS40A: -40 °C to 125 °C [-40 °F to
integrated circuit responds 257 °F]
Operating temperature range -40 °C to 150 °C [-40 °F to 302 °F]
to low (25 G max.) fields at SS30AT/SS50AT: -40 °C to 125 °C
distances up to 1 inch. [-40 °F to 257 °F]

Hall-effect vane sensors


consist of a magnet and a Hall-
effect sensor inside a rugged
plastic housing. Different
package styles provide
mounting flexibility. 1st level Hall-effect
Gear tooth sensors use a sensors - digital
SS340RT/SS440R Series SS351AT/SS451A
magnetically biased Hall-
effect IC to sense movement
unipolar Hall-effect digital position omnipolar Hall-effect digital position
of ferrous metal targets. The Description
sensor sensor
specially designed IC is sealed
unipolar: SS340RT: North pole
in a durable plastic probe-type Magnetic actuation type omnipolar
unipolar: SS440R: South pole
package.
SS340RT: plastic surface mount (SOT-
SS351AT: plastic surface mount (SOT-23)
Additional built-in benefits: Package material and style 23)
SS451A: plastic radial lead
true solid state, extended SS440R: plastic radial lead
life (30 billion operations in a 3 Vdc to 24 Vdc, except SS340RT 3 Vdc to 24 Vdc, except SS351AT
Supply voltage range
module test program), high >125 °C [257 °F]: 3 Vdc to 12 Vdc >125 °C [257 °F]: 3 Vdc to 12 Vdc
speed operation (over 100 Supply current 8 mA 9 mA
kHz), stationary input (zero Output type digital sinking digital sinking
speed), no moving parts, logic SS440R Series (3 Vdc to 24 Vdc): SS451A Series (3 Vdc to 24 Vdc):
compatible output, and broad -40 °C to 150 °C [-40 °F to 302 °F] -40 °C to 150 °C [-40 °F to 302 °F]
temperature range (-40 °C to SS340RT Series (3 Vdc to 24 Vdc): SS351AT Series (3 Vdc to 24 Vdc):
Operating temperature range
-40 °C to 125 °C [-40 °F to 257 °F] -40 °C to 125 °C [-40 °F to 257 °F]
150 °C, -40 °F to 302 °F).
SS340RT Series (3 Vdc to 12 Vdc): SS351AT Series (3 Vdc to 12 Vdc):
-40°C to 150 °C [-40°C to 302 °F] -40 °C to 150 °C [-40 °C to 302 °F]

2 www.honeywell.com/sensing
1st level Hall-effect
sensors - digital
SS361RT/SS461R SS400/SS500 Series SS41/SS51T Series

SS400: Hall-effect digital position sensor


Description Hall-effect digital position sensor SS500: unipolar/bipolar/bipolar latch bipolar Hall-effect digital position sensor
Hall-effect digital position sensor
Magnetic actuation type bipolar latch unipolar, bipolar, bipolar latch bipolar
SS361RT: plastic surface mount (SOT-23) SS400: plastic radial lead SS41: plastic radial lead
Package material and style
SS461R: plastic radial lead SS500: plastic surface mount (SOT-89) SS51T: plastic surface mount (SOT-89)
3 Vdc to 18 Vdc, except SS361RT>
Supply voltage range 3.8 Vdc to 30 Vdc (inclusive) 4.5 Vdc to 24 Vdc
125 °C [257 °F]: 3 Vdc to 12 Vdc
SS400: 10 mA
Supply current 8 mA 15 mA max.
SS500: 8.7 mA at 5 Vdc
Output type digital sinking digital sinking digital sinking
SS361RT (3 V to 12 V) & SS461R: 40 °C
to 150 °C [-40 °C to 302 °C] -40 °C to 150 °C
Operating temperature range -40 °C to 150 °C [-40 °F to 302 °F]
SS361RT (3 V to 18 V): -40 °C to 125 °C [-40 °F to 302 °F]
[-40 °F to 257 °F]

1st level Hall-effect


sensors - digital
SS421 Series SS42R SS46 VF526DT

bipolar latch dual active high/


adjustable bipolar Hall-effect bipolar latch dual Hall-effect
active low complementary bipolar latch Hall-effect digital
Description digital underspeed detection digital position sensor with
outputs Hall-effect digital position sensor
sensor speed and direction outputs
position sensor
Magnetic actuation type bipolar bipolar latch bipolar latch bipolar latch
Package material and style plastic radial lead plastic radial lead plastic radial lead plastic surface mount (SOT-89)
Supply voltage range 4.5 Vdc to 16 Vdc 4.5 Vdc to 16 Vdc 4.5 Vdc to 24 Vdc 3.4 Vdc to 24 Vdc
Supply current 15 mA max. 11 mA max. 10 mA max. 14 mA max.
Output type digital sinking digital sinking or sourcing digital sinking digital sinking
-40 °C to 105 °C 0 °C to 100 °C -40 °C to 150 °C -40 °C to 125 °C
Operating temperature range
[-40 °F to 221 °F] [32 °F to 212 °F] [-40 °F to 302 °F] [-40 °F to 257 °F]

www.honeywell.com/sensing 3
Magnetic Sensors Line Guide

1st level Hall-effect


sensors - linear
91SS Series SS490/SS491B Series SS49E/SS59ET Series SS94 Series

Hall-effect linear position Hall-effect linear position low-cost Hall-effect linear Hall-effect linear position
Description
sensor sensor position sensor sensor
Magnetic actuation type linear linear linear linear
SS490: plastic radial
SS49E: plastic radial lead
ceramic SIP, ceramic with lead, plastic surface pack, ceramic SIP, ceramic with
Package material and style SS59ET: plastic surface mount
solder bumps ammopack styles T2 and T3 solder bumps
(SOT-89)
SS491B: plastic radial lead
Supply voltage range 8 Vdc to 16 Vdc 4.5 Vdc to 10.5 Vdc 2.7 Vdc to 6.5 Vdc 4.5 Vdc to 12.6 Vdc
Supply current 19 mA max. 10 mA 10 mA 30 mA max.
ratiometric sinking or ratiometric sinking or
Output type ratiometric sourcing ratiometric sourcing
sourcing sourcing
-40 °C to 150 °C -40 °C to 150 °C -40 °C to 100 °C -40 °C to 150 °C
Operating temperature range
[-40 °F to 302 °F] [-40 °F to 302 °F] [-40 °F to 212 °F] [-40 °F to 302 °F]

1st level
magnetoresistive
sensors 2SS52M Series SS552MT APS Series

omnipolar magnetoresistive digital omnipolar magnetoresistive digital dual bridge magnetoresistive position
Description
position sensor position sensor sensor
Magnetic actuation type omnipolar omnipolar diametric field
Package material and style plastic radial leads plastic surface mount (SOT-89 style) plastic surface mount
Supply voltage range 3.8 Vdc to 30 Vdc 3.8 Vdc to 30 Vdc 12 Vdc max.
Supply current 11 mA max. 11 mA max. 7 mA max.
Output type digital sinking digital sinking sin(2Q), cos(2Q)
Operating temperature range -40 °C to 150 °C [-40 to 302 °F] -40 °C to 150 °C [-40 to 302 °F] -40 °C to 150 °C [-40 °F to 302 °F]

4 www.honeywell.com/sensing
2nd level value-
added Hall-effect
sensors 103SR Series (Digital) 103SR Series (Linear)

Description Hall-effect digital position sensor Hall-effect linear position sensor


Package material and style aluminum threaded barrel aluminum threaded barrel
Magnetic actuation unipolar, bipolar, bipolar latch linear
Operation proximity to external magnet proximity to external magnet
Supply voltage range 4.5 Vdc to 24 Vdc 4.5 Vdc to 10.5 Vdc
Supply current 4 mA to 10 mA (inclusive) 7 mA
digital sinking or sourcing
Output type ratiometric sinking/sourcing
(depends on listing)
Operating temperature range -40 °C to 100 °C [-40 °F to 212 °F] -40 °C to 100 °C [-40 °F to 212 °F]

2nd level value-


added Hall-effect
sensors 1GT Series 4AV Series SR16/SR17 Series

Description Hall-effect sensor Hall-effect vane sensor low-cost Hall-effect vane sensor
SR16: plastic dual tower with variety of
plastic dual tower wire exit, plastic dual
Package material and style plastic probe terminations
tower with connector
SR17: plastic side-mount wire exit
Magnetic actuation – – –
Operation ferrous metal actuator ferrous metal actuator ferrous metal actuator
Supply voltage range 4.5 Vdc to 26.5 Vdc (inclusive) 4.5 Vdc to 24 Vdc 3.8 Vdc to 30 Vdc
Supply current 20 mA max. 18.5 mA max. 10 mA max.
Output type digital sinking digital sinking digital sinking
Operating temperature range -40 °C to 150 °C [-40 °F to 302 °F] -40 °C to 125 °C [-40 °F to 257 °F] -20 °C to 85 °C [-4 °F to 185 °F]

www.honeywell.com/sensing 5
Magnetic Sensors Line Guide

2nd level value-


added Hall-effect
sensors SR3 Series SR4 Series VX10/VX80 Series

Description Hall-effect digital position sensor magnetoresistive digital position sensor Hall-effect solid state switch
Package material and style plastic threaded barrel plastic threaded barrel plastic mechanical switch
Magnetic actuation unipolar, bipolar omnipolar –
Operation proximity to external magnet proximity to external magnet plunger actuator
Supply voltage range 4.5 Vdc to 24 Vdc 3.8 Vdc to 30 Vdc 4 Vdc to 24 Vdc
Supply current 10 mA 11 mA 15 mA
Output type digital sinking digital sinking digital sinking
Operating temperature range -40 °C to 85 °C [-40 °F to 185 °F] -40 °C to 85 °C [-40 °F to 185 °F] -40 °C to 75 °C [-40 °F to 167 °F]

Speed and
direction sensors
1GT Series GTN Series

Description single Hall-effect sensor single Hall-effect sensor


Supply voltage range 4.5 Vdc to 26.5 Vdc (inclusive) 8 Vdc to 32 Vdc (inclusive)
Supply current 20 mA 40 mA
Output type digital sinking (open collector) digital sinking (open collector)
Operating frequency range 0 Hz to 25 kHz (inclusive) 2 Hz to 9 kHz
Operating temperature range -40 °C to 150 °C [-40 °F to 302 °F] -40 °C to 125 °C [-40 °F to 257 °F]

6 www.honeywell.com/sensing
Speed and
direction sensors
LCZ Series SNDH-T Series SNDH Series

dual differential Hall-effect quadrature dual differential Hall-effect quadrature


Description single Hall-effect zero speed sensor
speed and direction sensor speed and direction sensor
Housing stainless steel n/a n/a
Supply voltage range 4.5 Vdc to 26 Vdc 4.5 Vdc to 18 Vdc 4.5 Vdc to 18 Vdc
Supply current 20 mA 18 mA max. 18 mA max.
Output type digital sinking square wave square wave
Operating frequency range 0 Hz to 15 kHz 1 Hz to 15 kHz 1 Hz to 15 kHz
Operating temperature range -40 °C to 125 °C [-40 °F to 257 °F] -40 °C to 150 °C [-40 °F to 302 °F] -40 °C to 150 °C [-40 °F to 302 °F]

Speed and
direction sensors
SNDJ Series ZH10

zero speed Hall-effect sensor,


Description differential Hall-effect sensor, single Hall-effect zero speed sensor
dual Hall-effect sensor
Housing n/a aluminum
Supply voltage range 8 Vdc to 32 Vdc (inclusive) 4 Vdc to 24 Vdc
Supply current 10 mA to 20 mA max. (inclusive) 6 mA
square wave and one direction signal,
square wave signal from NPN output transistor with 2.7 kOhm
Output type pull-up, dc-coupled to supply, digital sinking
square wave signal from push-pull stage, dc-coupled to
supply
Operating frequency range 0 Hz to 15 kHz (inclusive) 0 Hz to 15 kHz
Operating temperature range -20 °C to 100 °C [-4 °F to 212 °F] -40 °C to 125 °C [-40 °F to 257 °F]

Passive speed
sensors
VRS General Purpose Series VRS Hazardous Location Series

Output voltage range 8 Vp-p to 40 Vp-p (inclusive) 30 Vp-p to 60 Vp-p (inclusive)


Housing diameter 5/8 in, 3/8 in, 1/4 in, 10/32 in 3/4 in, 5/8 in
Housing material and style stainless steel threaded or smooth stainless steel threaded
Termination MS3106 connector, preleaded MS3106 connector, preleaded
Operating temperature range -55 °C to 120 °C [-67 °F to 250 °F] (inclusive) -73 °C to 120 °C [-100 °F to 250 °F] (inclusive)

www.honeywell.com/sensing 7
Passive speed
sensors
VRS High Output Series VRS High Resolution Series VRS High Temperature Series

Output voltage range 8 Vp-p to 190 Vp-p (inclusive) 17 Vp-p to 170 Vp-p 4.7 Vp-p to 125 Vp-p (inclusive)
Housing diameter 5/8 in, 3/8 in 5/8 in, 3/8 in 5/8 in, 3/8 in, 1/4 in
Housing material and style stainless steel threaded or smooth stainless steel threaded stainless steel threaded
Termination MS3106 connector, preleaded MS3106 connector, preleaded MS3106 connector, preleaded
-55 °C to 150 °C [-67 °F to 300 °F] -73 °C to 230 °C [-100 °F to 450 °F]
Operating temperature range -55 °C to 120 °C [-67 °F to 250 °F]
(inclusive) (inclusive)

Passive speed
sensors
VRS Plastic Molded Series VRS Power Output Series

Output voltage range 10 Vp-p to 190 Vp-p (inclusive) 70 Vp-p (inclusive)


Housing diameter 0.505 in, 7/16 in, 0.292 in, 1/4 in 5/8 in
Housing material and style plastic smooth or threaded stainless steel threaded
Termination crimp, pin, preleaded MS3106 connector, preleaded
Operating temperature range -55 °C to 230 °C [-67 °F to 450 °F] (inclusive) -55 °C to 120 °C [-67 °F to 250 °F]

Speed sensor
building blocks
1GM Series 1GP Series 1GQ Series

Description magnetoresistive Hall-effect Hall-effect


Target geometry complementary target equal slots, tooth size can vary slot size can vary, tooth size can vary
Housing material plastic metal metal
Zero speed sensing yes no no
Power supply range 4.5 Vdc to 16 Vdc 4.5 Vdc to 24 Vdc 5 Vdc to 26.5 Vdc
Output digital current sinking digital current sinking digital current sinking
Operating speed up to 100 kHz up to 100 kHz up to 100 kHz
Operating temperature range -40 °C to 150 °C [-40 °F to 302 °F] -40 °C to 150 °C [-40 °F to 302 °F] -40 °C to 150 °C [-40 °F to 302 °F]

8 www.honeywell.com/sensing
or North pole • Low voltage 3 V capability applications include speed and RPM Benefits: Internal circuitry contains
• Built-in reverse polarity protection sensing, brushless dc motor commutation, timer so that one or two pulses at slower
• Thermally balanced integrated circuit tachometer, counter pickup, motor and repetition rate than set point do not
over full temperature range fan control, electric window lift, convertible produce unwanted output. Small amount
roof position and automotive transmission of hysteresis built into output provides
Benefits: Available in two package styles:
position detection, flow-rate sensing, operation right at set point and does
SS351AT in the subminiature SOT-23
robotics control. not result in chattering output. User-
surface mount; the SS451A in the leaded,
provided external resistor and capacitor
flat TO-92-style. The SS351AT’s small size
SS400/SS500 Series. combination selects speed trip point
requires less PC board space, allowing
Features: Unipolar, bipolar, bipolar latch for particular application. Temperature
it to be used in smaller assemblies. Its
magnetics • Sinking output • Multiple compensated for consistent operation with
3 Vdc capability allows for use in low
operate/release points available low-cost magnets. Built-in timing circuit
voltage applications, promoting energy
• Temperature compensated magnetics designed to simplify and reduce cost of
efficiency. Subminiature package size
with negative slope • High output current PC board design. Potential applications
(SS351AT) supplied on tape and reel allows
capability • Small through-hole and include monitor fan or motor performance.
for a compact design with automated
surface-mount (SOT-89) packages • Tape
component placement, helping to reduce
and reel available SS42R.
manufacturing costs. Operated by a North
Features: Hall effect • Bipolar latch
pole or a South pole, these products Benefits: Quad Hall element design
magnetics • Sinking or sourcing outputs
do not require the magnet polarity to be minimizes effects of mechanical or thermal
• High output current capability • Reverse
identified, thus making the installation stress on output and provides stable
polarity protection
easier and potentially reducing system output. Negative compensation slope
cost. Built-in reverse polarity protection optimized to match negative temperature Benefits: Hall-effect integrated circuit with
protects the device from potential damage coefficient of lower cost magnets, providing pair of complementary push/pull outputs.
during installation. Thermally balanced robust design over wide temperature Dual Hall-effect element offsets stress-
integrated circuit provides for stable range. Band gap regulation provides induced noise and drift. Operate and
operation over a wide temperature range. stable operation over supply voltage release points laser trimmed to improve
Potential applications include speed and range. Potential applications include symmetry around zero. Internal circuitry
RPM (revolutions per minute) sensing in speed and RPM sensing, brushless dc prevents sensor damage in case supply
fitness equipment, magnetic encoder for motor commutation, motor and fan control, voltage polarity is accidentally reversed.
building access, damper or valve position magnetic encoding, disc speed, tape Potential applications include conveyors,
control in HVAC (heating, ventilation and rotation, flow-rate sensing, lid and door motor control, ignition timing, power
air conditioning) equipment, flow rate closing detection, and position sensing. sensing, linear or rotary motion detection,
sensing in appliances and industrial and RPM sensing.
processes, robotic control (cylinder position SS41/SS51T Series.
monitoring), displacement sensor in Features: Bipolar magnetics • Sinking SS46.
hospital beds, and medical equipment. output • High output current capability Features: Bipolar latch magnetics
• Reverse polarity protection • Sinking (open collector) output
SS361RT/SS461R. • Negative compensation slope • High
Benefits: Built-in regulator provides
Features: Bipolar latching magnetics output current capability • High speed
enhanced operational stability over supply
• Enhanced sensitivity • Subminiature capability • Reverse polarity protection
voltage range. Open-collector digital
package size (SS361RT) • Low voltage:
sinking output voltage easily interfaces with Benefits: Internal circuitry prevents sensor
3 V operation • Built-in reverse polarity
wide variety of electronic circuits. Internal damage in case supply voltage polarity
protection • Robust design: will operate
circuitry prevents sensor damage in case is accidentally reversed. Open-collector
up to 150 °C [302 °F] • Through-hole
supply voltage polarity is accidentally sinking output voltage easily interfaces
and surface-mount (SOT-23 and SOT-89)
reversed. Potential applications include with wide variety of electronic circuits.
packages
brushless dc motor commutation, motor Potential applications include speed
Benefits: Enhanced sensitivity often and fan control, magnetic encoding, and and RPM sensing, brushless dc motor
allows for the use of less expensive tape rotation sensing. commutation, motor and fan control,
magnets. Small size requires less PC board magnetic encoding, disc speed, tape
space, allowing it to be used in smaller SS421 Series. rotation, and flow-rate sensing.
assemblies. 3 V capability allows for use in Features: Bipolar magnetics • Sinking
low voltage applications, promoting energy output • Active high and active low VF526DT.
efficiency. Available on tape and reel for versions • Adjustable speed trip point with Features: Separate speed and direction
most high volume applications. Potential external resistor and capacitor outputs • Bipolar latch magnetics
• Temperature compensated www.honeywell.com/sensing 9
• Sinking output • Temperature temperature compensation to reduce null Benefits: Low gauss operation (25 G
compensated • Small, surface mount and gain shift over temperature. Positive max.) extends sensing distance to one
package • Tape and reel temperature coefficient helps compensate inch or more, depending on size. Potential
for negative temperature coefficients of polarity independent applications include
Benefits: Single package includes
low cost magnets, providing robust design presence/absence detection, lid sensor
two separate Hall sensing elements.
over wide temperature range. Rail-to-rail for laptop computers, position sensing for
Frequency signal provides speed
operation provides more useable signal for material handling equipment, and cylinder
output; logic level (high or low) signal
enhanced resolution. Potential applications position sensing in pneumatic cylinders
provides direction output of a magnetic
include current sensing, motor control,
gradient across package face. Built-in
position sensing, magnetic code reading, SS552MT.
temperature compensation optimized to
rotary encoding, liquid level sensing, Features: Magnetorestive • Omnipolar
match temperature coefficient of low cost
vibration, and weight sensing applications. magnetics • Sinking output • Low gauss
magnets and track their performance
operation (25 G max.) • Operating speed
over temperature. Unique regulator circuit
SS49E/SS59ET Series. of 0 kHz to over 100 kHz • Small, surface
provides stable operation over supply
Features: Linear magnetics • Ratiometric mount package • Tape and reel
voltages range. May be directly interfaced
sourcing output • Low-voltage operation
with many electronic components without Benefits: Low gauss operation (25
• Small, through-hole and surface-mount
buffering or compensation. Small, surface- G max.) extends sensing distance to
packages • Available on tape and reel
mount package allows automated, lower- one inch or more, depending on size.
cost assembly. Potential applications Benefits: Thin film resistors provide Small, surface-mount package allows
include power seats (headrest), power enhanced temperature stability and automated, lower-cost assembly. Potential
sliding doors, sunroofs, garage door accuracy. Low voltage operation for polarity independent applications include
openers, magnetic encoding for electronic energy efficiency. Potential applications presence/absence detection, lid sensor
steering systems, and motion control include current sensing, motor control, for laptop computers, position sensing for
systems for pulleys and belts. position sensing, magnetic code reading, material handling equipment, and cylinder
ferrous metal detection, vibration, and position sensing in pneumatic cylinders
1st level hall-effect liquid level sensing.
sensors - LINEAR APS Series.
91SS Series. SS94 Series. Features: Sine and cosine output
Features: Linear magnetics • Ratriometric Features: Linear magnetics • Ratiometric • Accurate to 0.102 mm [0.004 in]
sourcing output • Standard mounting sourcing output • Standard mounting • Miniature size • Tape and reel
centers • Linearity is ±1.5 % max. • Two centers • Linearity is ±1.5 % max. • Two
Benefits: Dual bridge provides sine
package styles package styles
and cosine output. Miniature size allows
Benefits: Hall-effect integrated circuit Benefits: Hall-effect integrated circuit multiple sensors to be used in a small area
chip provides enhanced temperature chip provides enhanced temperature and in an array of configurations such as
stability and performance. Laser-trimmed, stability and performance. Laser-trimmed, arcs, lines, and circles. Available on tape
thick film resistors on ceramic substrate thick film resistors on ceramic substrate on reel for automated assembly and pick
and thin film resistors on integrated and thin film resistors on integrated and place. Especially suited for potential
circuit reduce null and gain shifts over circuit reduce null and gain shifts over rotary position sensing applications.
temperature, resulting in consistent temperature, resulting in consistent
sensitivity between devices. Potential sensitivity between devices. Includes 2nd Level Value-Added Hall-
applications include robotics control, low drift, high sensitivity, noise shielded, Effect Sensors
current sensing, linear or rotary motion and general purpose listings. Potential 103SR Series (Digital).
detection, and length measurement. applications include robotics control, Features: Unipolar, bipolar, bipolar latch
current sensing, linear or rotary motion magnetics • Sinking or sourcing output
SS490/SS491B Series. detection, and length measurement. • Aluminum housing • Color-coded,
Features: Linear magnetics • Ratiometric jacketed cable • Adjustable mounting
sourcing output • Positive temperature 1st level magnetoresistive
Benefits: Rugged, threaded aluminum
coefficient • Different package styles sensors
housing. Choice of cable materials
2SS552M Series.
Benefits: Quad Hall elements design provides application flexibility. Potential
Features: Omnipolar magnetics • Sinking
minimizes effects of mechanical or applications include position and RPM
output • Low gauss operation (25 G max.)
thermal stress on output and provides sensing in non-corrosive applications.
• Operating speed of 0 kHz to over 100
stable output. Laser-trimmed thin film
kHz • Small, through-hole package • Tape
resistors provide enhanced accuracy and 103SR Series (Linear).
and reel available
Features: Linear magnetics • Ratiometric
10 www.honeywell.com/sensing
sinking/sourcing output • Aluminum packages • Environmentally sealed and produces digital logic level output
housing • Color-coded, jacketed cable package • Three terminations available for direct interface to solid state circuits.
• Adjustable mounting Internal circuitry prevents sensor
Benefits: Internal magnet and Hall-
damage in case supply voltage polarity
Benefits: Rugged, threaded aluminum effect sensor mounted in dual tower or
is accidentally reversed. Uses standard
housing. Choice of cable materials provides side mount configuration for application
keyed and locking plug-in connectors.
application flexibility. Potential applications flexibility. Mechanically interchangeable
Terminal pins accept AMP connectors.
include position and RPM sensing in non- with standard optical sensors. Medium
Potential applications include lid position
corrosive applications. level magnetic switching reduces stray field
sensing and coin detection.
interference. No mechanical contacts often
1GT Series. eliminates product wear. Environmentally
Speed and Direction sensors
Features: Sinking output • Fast operating sealed plastic package provides enhanced
1GT Series.
speed • Reverse polarity and transient accuracy and repeatability in environments
Features: Enhanced operating speed
protection • EMI resistant • Wide in which dirt, dust, or stray IR light might
• Reverse polarity and transient protection
continuous operating temperature range affect performance of optical solutions.
• EMI resistant • Wide continuous
• Probe-style package Potential applications include position and
operating temperature range • Probe-
speed sensing in fitness and information
Benefits: Magnetically-biased, Hall-effect style package • Enhanced low speed
technology, as well as in moderate
integrated circuit accurately senses performance • Output amplitude not
electrical, chemical, and mechanical
movement of ferrous metal targets. Sealed dependent on RPM
environments.
in probe-style package for physical
Benefits: Sealed in probe-style package
protection and cost-effective installation.
SR3 Series. for physical protection and cost-effective
Internal circuitry prevents sensor
Features: Unipolar, bipolar magnetics installation. Sensor electronically self-
damage in case supply voltage polarity
• Sinking output • Frequencies exceeding adjusts to slight variations in runout and
is accidentally reversed. Enhanced low
100 kHz temperature, simplifying installation and
speed performance, output amplitude not
maintenance. Circuit senses movement
dependent on RPM. Sensor electronically Benefits: Plastic housing for position
of targets in potential applications such
self-adjusts to slight variations in runout and RPM sensing in potential corrosive
as camshaft and crankshaft speed
and temperature, simplifying installation applications such as food and beverage,
and position, transmission speed, and
and maintenance. Potential applications chemical plants, and refineries.
tachometer, as well as anti-skid and
include camshaft and crankshaft speed
traction control.
and position, transmission speed, and SR4 Series.
tachometer, as well as anti-skid and Features: Magnetoresistive • Omnipolar
GTN Series.
traction control. magnetics • Sinking output
Features: Choice of barrel lengths
Benefits: Magnetoresistive technology • Integrated electronic diagnostics
4AV Series.
allows longer sensing distance at lower • Enhanced operating speed • EMI
Features: Magnet and sensor
gauss than Hall effect. Plastic housing resistant • Reverse polarity and transient
incorporated in same rugged package
for position and RPM sensing in potential protection • Wide continuous operating
• Sinking output • Zero speed capability
corrosive applications such as food and temperature range • Probe-style package
• On and off times programmable by vane
beverage, chemical plants, and refineries. • Enhanced low speed performance
dimensioning • Precision mechanical
• Output amplitude not dependent on RPM
operating characteristics
VX10/VX80 Series.
Benefits: Sealed in probe-style package
Benefits: May be used as limit switch Features: Sinking output • Non-contact,
for physical protection and cost-effective
by operating with single large vane, as low force operation • Reverse voltage
installation. Sensor electronically self-
tachometer sensor by using toothed protection • Rugged construction
adjusts to slight variations in runout and
wheels, or as synchronizing element by • Standard levers and actuators available
temperature, simplifying installation
using cams or sectors. Closely controlled • Lever external to switch body • Industry-
and maintenance. Integrated electronic
differential predicts pulse width. Sealed standard mounting holes • Miniature size
diagnostics detect open or short circuits
construction unaffected by dust or dirt.
Benefits: Combines miniature size, in power supply line by monitoring sensor
Potential applications include sprocket
mechanical switch construction, operating output. Circuit senses movement of ferrous
speed, detection, and tachometer.
and mounting convenience with solid state metal targets in potential applications
reliability. Switching element is Hall-effect such as camshaft and crankshaft speed
SR16/SR17 Series.
transducer with trigger and amplifier and position, transmission speed, and
Features: Sinking output • Non-contact
integrated on silicon chip. Integral magnet tachometer, as well as anti-skid and
position sensing • Compact, robust
molded in plunger actuates transducer traction control.
www.honeywell.com/sensing 11
LCZ Series. • Air gap up to 2 mm [0.08 in] • Low jitter rollers, mixers, fan speed measurement,
Features: Stainless steel package • Low output • Near-zero speed • EMI hardened transmission, spindles, gear reducer RPM,
cost • Omni-directional sensor to target • High frequency switching capability synchronization, compressor speed, and
orientation • Low power consumption • Multiple connector options includes wire dyno testing, as well as industrial process
• Small size • Zero speed • Digital output harness and integral connector versions control and factory automation.
• Durable, cost-effective sensing solution using AMP super seal or AMP Jr.
• Screw-in package style • Probe-style package • Integrated circuit Passive Speed Sensors
packaging provides output phase shift VRS General Purpose Series,
Benefits: Available in several diameters
tolerancing with enhanced accuracy VRS Hazardous Location Series,
and lengths for application flexibility.
VRS High Output Series, VRS
Stainless steel package simple to install/ Benefits: Provides speed and direction
High Resolution Series, VRS High
adjust and does not require rotational information using quadrature output with
Temperature Series, VRS Plastic
orientation. Potential applications include signals 90 degree phase shifted from each
Molded Series, VRS Power Output
harsh environment rotary applications other. BiCMOS Hall-effect technology,
Series.
such as pumps, rollers, mixers, fan speed using advanced digital signal processing
Features: Self-powered operation
measurement, transmission, spindles, for dynamic off-set cancellation, provides
• Simple installation • No moving parts
gear reducer RPM, synchronization, enhanced air gap performance and phase
• Operates over wide speed range
compressor speed, and dyno testing, shift accuracy over most conditions.
• Adaptable to wide variety of
as well as industrial process control and Package design includes O-ring seal for
configurations • Customized versions
factory automation. potential pressure applications and a
for potential unique speed sensing
fixed mounting flange. Robust, automotive
applications
SNDH-T Series. under-the-hood grade packaging for most
Features: Advanced performance environmental conditions as well as EMI Benefits: All: Direct conversion of
dynamic offset self calibration • Short hardened. Used in potential applications actuator speed to output frequency. VRS
circuit and reverse voltage protection where high resolution is required at wide General Purpose Series, VRS Hazardous
• Air gap up to 2 mm [0.08 in] • Low jitter frequency ranges and large air gaps. Location Series: Simple, rugged devices
output • Near-zero speed • EMI hardened do not require external voltage source
• High frequency switching capability SNDJ Series. for operation. VRS High Output Series:
• Multiple connector options includes wire Features: Three housing styles • Three Performs best at low to medium speeds
harness and integral connector versions different outputs • Direct sensing of with medium to high impedance loads.
using AMP super seal or AMP Jr. ferrous metal target • Zero speed sensing Sealed front-end versions available for
• Probe-style package • Integrated circuit capabilities (some listings) • Stainless use where sensor is exposed to fluids,
packaging provides output phase shift steel housing • Probe and screw-in lubricants, or adverse environmental
tolerancing with enhanced accuracy package styles • Rotational orientation conditions. VRS High Resolution Series:
independent of sensor function Proper sensor alignment is required. VRS
Benefits: Provides speed and direction
High Temperature Series: Sealed front-end
information using quadrature output with Benefits: Used with ferromagnetic
versions for potential applications where
signals 90 degree phase shifted from each gears or pole wheel to generate impulse
sensor is exposed to fluids, lubricants, or
other. BiCMOS Hall-effect technology, frequencies proportional to target speed.
adverse environmental conditions.
using advanced digital signal processing Rugged stainless steel housing for
for dynamic off-set cancellation, provides potential applications found in high speed Potential applications: VRS General
enhanced air gap performance and phase gear tooth sensing, over-speed detection, Purpose Series: Engine and motor RPM,
shift accuracy over most conditions. and rotary gear or shaft position detection. process, flow, wheel-slip, and gear speed
Package design includes O-ring seal for measurement with medium to high speeds
potential pressure applications and a ZH10. or in electrically noisy environments with
fixed mounting flange. Robust, automotive Features: Aluminum package • Low relatively small air gaps. VRS Hazardous
under-the-hood grade packaging for most cost • Omni-directional sensor to target Location Series: Engine and motor RPM,
environmental conditions as well as EMI orientation • Low power consumption process, flow, wheel-slip, and gear speed
hardened. Used in potential applications • Small size • Zero speed • Digital output measurement where explosion-proof or
where high resolution is required at wide • Durable, cost-effective sensing solution intrinsically safe sensors are required.
frequency ranges and large air gaps. • Screw-in package style VRS High Output Series: Engine and
motor RPM, process, flow, wheel-slip, and
Benefits: Aluminum package simple
SNDH Series. gear speed measurement where higher
to install/adjust and does not require
Features: Advanced performance output voltages are needed. VRS High
rotational orientation. Potential
dynamic offset self calibration • Short Resolution Series: Engine and motor RPM,
applications include harsh environment
circuit and reverse voltage protection process, flow, wheel-slip, and gear speed
rotary applications such as pumps,
12 www.honeywell.com/sensing measurement where precise timing pulse is
required, and/or fine pitch gears are used. and position sensing, transmission speed
VRS High Temperature Series: Engine and sensing, and tachometers. WARNING
motor RPM, process, flow, wheel-slip, and PERSONAL INJURY
gear speed measurement where sensor is 1GQ Series. • DO NOT USE these products as
exposed to temperatures up to 260 °C [450 Features: Environmentally protected safety or emergency stop devices
°F]. VRS Low-Cost Molded Series: OEM. building block module • Enhanced low- or in any other application where
VRS Power Output Series: Driving low speed performance • Output amplitude failure of the product could result in
resistance loads at large air gaps in engine not dependent on target speed • Optional personal injury.
and motor RPM, process, flow, wheel-slip, inverted output • Enhanced operating Failure to comply with these
and gear speed measurement where larger speed • Transient (ISO 7637/1) and instructions could result in death or
actuators may be used. reversed polarity protection • EMI resistant serious injury.
• Wide operating temperature range • Can
Speed Sensor Building sense European 60-2 crank target WARNING
Blocks MISUSE OF DOCUMENTATION
Benefits: Hall-effect gear-tooth sensor
1GM Series. • The information presented in this
accurately detects absence or presence
Features: Building block module • Power- catalogue is for reference only. DO
of moving ferromagnetic target. Integrated
on recognition sensing • Zero speed NOT USE this document as product
circuit, discrete components, and magnet installation information.
• Enhanced operating speed • Transient
enclosed in environmentally-sealed, • Complete installation, operation and
and reversed polarity protection • EMI
cylindrical stainless steel housing. maintenance information is provided
resistant • Wide operating temperature
Symmetry not required; senses irregularly in the instructions supplied with each
range
shaped targets as well as small teeth product.
Benefits: Enhanced accuracy, and slots. Potential applications include Failure to comply with these
magnetoresistive sensor designed to camshaft and crankshaft speed and instructions could result in death or
provide zero-speed sensing when using a position sensing, transmission speed serious injury.
complementary target (both tooth and slot sensing, and tachometers.
are in same sensing face) configuration.
Potential applications include camshaft Warranty. Honeywell warrants goods of While we provide application assistance
speed and position sensing. its manufacture as being free of defective personally, through our literature and
materials and faulty workmanship. the Honeywell web site, it is up to the
1GP Series. Honeywell’s standard product warranty customer to determine the suitability of the
Features: Environmentally protected applies unless agreed to otherwise by product in the application.
building block module • Optional inverted Honeywell in writing; please refer to your
output • Enhanced low-speed performance order acknowledgement or consult your Specifications may change without notice.
• Output amplitude not dependent on local sales office for specific warranty The information we supply is believed to
target speed • Enhanced operating speed details. If warranted goods are returned to be accurate and reliable as of this printing.
• Transient (ISO 7637/1) and reversed Honeywell during the period of coverage, However, we assume no responsibility for
polarity protection • EMI resistant • Wide Honeywell will repair or replace, at its its use.
operating temperature range option, without charge those items it finds
Benefits: Hall-effect gear-tooth sensor defective. The foregoing is buyer’s sole For more information about Sensing and
accurately detects absence or presence remedy and is in lieu of all warranties, Control products, visit www.honeywell.
of moving ferromagnetic target. Integrated expressed or implied, including those com/sensing or call +1-815-235-6847
circuit, discrete components, and magnet of merchantability and fitness for a Email inquiries to info.sc@honeywell.com
enclosed in environmentally-sealed, particular purpose. In no event shall
stainless steel can. Potential applications Honeywell be liable for consequential,
include camshaft and crankshaft speed special, or indirect damages.

Sensing and Control


Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
005894-7-EN IL50 GLO 
+1-815-235-6847 November 2009
Copyright © 2009 Honeywell International Inc. All rights reserved.
www.honeywell.com/sensing
www.honeywell.com/sensing 13

Anda mungkin juga menyukai