SELECTION OF OPTIONS
1. Turnable superstructure 180º 20. Towing hook
2. Air conditioning 21. Primary separator PE 50
3. Rod greasing system 22. Horizontal drilling kit (includes hose reel)
4. P&Q electric vertical angle indicator (± 6 deg.) 23. Hose reel (not with 14' rods)
5. Electric angle indicator TIM 2302 with aiming unit 24. Radio with CD player
6. Measuring system TIM 2303 with aiming unit 25. Central lubrication system
7. Laser based measuring system TIM 2305 26. Kit for alternative steels
8. Power extractor 27. Water injection system with tank
9. Electric filling pump for refuelling 28. Water injection system w/o tank
Remote control box; for rear ground support, driving 29. Dustmizer system
10.
and oscillation 30. Biogradeable hydraulic oil, Shell naturelle HFE 46 or
11. Remote control box + hydraulic winch with cable HFE 68 (synthetic ester)
tightness automatics (replaces and includes previous
31. Extra manuals
option)
12. Hydraulic rear ground support 32. First service kit for DX700
33. Special tools for HL 710, field kit
13. Three-bar grouser plates
ID 150 734 88
14. Guides for grousers 34. Special tools for HL 710, complete
15. Fuel operated heater for cabin, hydr. oil and engine ID 150 730 78
16. Flushing control automatics 35. Antifreeze for air lines
17. Shut down of suction for water holes 36. Vacuum cleaner for cabin
18. Sanrock Mini H hydraulic bit grinder 37. Sampling device
19. Readyness for Power extractor
COVERAGE AREA
1m
1m
7700
3600
3200
2590
10700 7200
Sandvik Mining and Construction reserves the right to change this specification without further notice.
Sandvik Mining and Construction Oy
P.O.Box 100, FIN–33311 Tampere, Finland
Tel. +358
© 2009 205 44Mining
Sandvik 121, Telefax +358 205 44 4771
and Construction 3/3
www.sandvik.com