INCLINED
SCREENS
683
TM
Fines conveyor
Oversize & Middle Grade Conveyors u Drive: Hydraulic variable speed drive via high
Main conveyor
683 u
u
u
Drive: Hydraulic variable speed drive via high torque 500cc motor
Belt width: 650mm (26”)
Belt spec: Chevron 2 ply EP250
u Drive: Hydraulic variable speed drive via
high torque 630cc motor
u
u
torque 630cc motor
Belt width: 1.2m (48”)
Belt spec: Plain, 3 ply, EP400
Renown for its quality, performance and productivity u Working Angle: 24° u Belt width: 1m (40”) u Working Angle: Variable 25° (Max)
the Terex Finlay 683 combines scalping, screening and u Speed: Variable speed, 0 - 103 mpm (338’ per min) u Belt spec: Plain 3 ply belt, EP400 u Rosta scraper on head drum
u Hydraulic Folding u Belt Speed: 92 mpm (302’ per min) u Speed: variable speed, 92 mpm (302’ per min)
stockpiling into one self contained unit. Its rugged u Discharge Height: 4.72m (14’) u Steel skirted full length of conveyor u Standard Discharge Height: 3.86m (12’ 8”)
design enables the Terex Finlay 683 with its top deck u Stockpile capacity: 194m³ (254yd³) u Stockpile capacity: 106m³ (139yd³))
3.66m x 1.53m (12’ x 5’) and bottom deck 3.00m x 1.53m
(10’ x 5’) screen to handle materials such as sand and Hopper / Feeder
gravel, limestone, crushed stone, coal, topsoil and u Hopper Capacity: 8m³ (10.5yd³)
u Feed height: 3.45m (11’ 4”)
demolition waste. Remote tipping reject grid, hydraulic u Feed in width: 4.77m (15’ 8”) (grid wing plates)
screen tensioning of bottom deck mesh and three on- u Grid aperture: 100mm (4’)
u Drive: Hydraulic variable speed drive via high
board hydraulic folding conveyors are standard. The torque 500cc motor Oversize conveyor
Terex Finlay 683 is available on tracks or as a wheeled u Beltfeeder belt width: 1.05m (42”)
u Belt Spec: Plain 3 ply belt, EP400
unit. Washing equipment can be fitted to the screenbox u Speed: variable, 0 - 16 mpm (0 - 53’ per min)
if required. u Wide mouth opening
Tipping grid
Features:
u The double deck screen box has all round catwalk access allowing
for ease of operational maintenance.
www.terexfinlay.com
Effective January 2015. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative
purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using
our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to
the particular product and sale and Terex GB Ltd. makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of
Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex® is a registered trademark of Terex Corporation in the USA and many other
countries. Copyright 2010 Terex GB Ltd.