PRODUCT LIST
FOR
ELECTRONICS TRAINER
5.
FET Characteristics
(Make: R & D Electronics, Model: ST-105)
Built in 0 to +12V @ 250mA Variable Voltage Source,
FET (BFW11),
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
6. MOSFET Characteristics
(Make: R & D Electronics, Model: ST-106)
Built in Variable +5V & +12V @ 250mA DC Power Supply,
MOSFET (3N187),
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of patch Chords & Experimental Manual.
7. SCR Characteristics
(Make: R & D Electronics, Model: ST-107)
Built in Dual 1.2 to +14 V @ 250mA Variable DC Power Supplies,
SCR (TYN604),
Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual
8. DIAC Characteristics
(Make: R & D Electronics, Model: ST-108)
Built in 1.2 to 45 V @ 250mA Variable Power Supplies,
DIAC (D32),
36V @ 50Hz Ac Source,
Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
9. TRIAC Characteristics
(Make: R & D Electronics, Model: ST-109)
Built in Dual 1.2 to 14 V @ 250mA Variable DC Power Supply,
TRIAC (BT136),
Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
13.
LDR Characteristics
(Make: R & D Electronics, Model: ST-113)
Built in 1.2 to 14V @ 250mA Variable Power Supplies,
LDR,
Variable Intensity Light Source,
Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
16. V D R Characteristics
(Make: R & D Electronics, Model: ST-116)
Built in +12V @ 250mA DC Power Supply,
Variable Load Resistors,
1W solar panel,
Electronic Load,
Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
NIC
measure the Voltage,
Set of Patch Chords & Experimental Manual.
(a)
9
Two Stage RC Coupled Amplifier
(Make: R & D Electronics, Model: AMT-209)
Built in + 12V @ 250mA DC Power Supply,
Two Stage Transistor CE amplifier,
Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
14 Amplifiers (Voltage Series, Voltage Shunt, Current Series and Current Shunt)
(Make: R & D Electronics, Model: AMT-214)
Built in +12V @ 250mA DC Power Supply,
Voltage Series feedback amplifier,
Voltage Shunt feed back amplifier,
Current Series feedback amplifier,
Current Shunt feedback amplifier,
Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
17
19 Trainer to Study Devices Characteristics and Amplifier Circuits (Using Discrete Components)
(Make: R & D Electronics, Model: AMT-219)
Built in + 12V @ 250mA DC power Supply,
Discrete components,
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
20 Study of IF Amplifier
(Make: R & D Electronics, Model: AMT-220)
Built in + 12V @ 250mA DC power Supply,
Collector Tuned IF Amplifier (455 KHz),
Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
21 FET Amplifier
(Make: R & D Electronics, Model: AMT-221)
Built in + 12V @ 250mA DC power Supply,
FET Amplifier,
Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual
NIC
2 Hartley Oscillator
(Make: R & D Electronics, Model: OS-302)
Built in +12V @ 250mA DC Power Supply,
Transistor Hartley oscillator,
2 Sets of Inductors,
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
3 Colpitts Oscillator
(Make: R & D Electronics, Model: OS-303)
Built in +12V @ 250mA DC Power Supply,
Transistor Coli Pitts Oscillator,
2 Sets of Capacitors,
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
4 Crystal Oscillator
(Make: R & D Electronics, Model: OS-304)
Built in +12V @ 250mA DC Power Supply,
Transistor Crystal Oscillator(1MHz),
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
8 Blocking Oscillator
(Make: R & D Electronics, Model: OS-308)
Built in +12V @ 250mA DC Power Supply,
Transistor Blocking Oscillator,
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
30 Clapp Oscillator
(Make: R & D Electronics, Model: OS-334)
Built in +12V @ 250mA DC Power Supply,
Clapp Oscillator,
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
31 Twin-T Oscillator
(Make: R & D Electronics, Model: OS-335)
Built in +12V @ 250mA DC Power Supply,
Twin-T Oscillator,
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
32 Pierce Oscillator
(Make: R & D Electronics, Model: OS-336)
Built in +12V @ 250mA DC Power Supply,
Pierce Oscillators,
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
NIC
2 Reciprocity Theorem
(Make: R & D Electronics, Model: NTT-402)
Built in + 12V @ 250mA Variable DC Power Supply
Resistor networks
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual
5 Miller’s Theorem
(Make: R & D Electronics, Model: NTT-405)
Built in + 12V @ 250mA DC Power Supply
Transistor based Miller Circuit
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual
6 Kirchoff`s Law
(Make: R & D Electronics, Model: NTT-406)
Built in + 5V @ 250mA DC Power Supply
Resistor networks.
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual
7 Ohms Law
(Make: R & D Electronics, Model: NTT-407)
Built in 1.2 to 14V @ 250mA DC Variable Power Supply
Resistor networks.
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
16
Study of Composite Band Pass & Band Stop Filters
(Make: R & D Electronics, Model: NTT-416)
Composite Band Pass filter
Composite Band Stop filter
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of Patch Chords & Experimental Manual.
18 Lattice Filters
(Make: R & D Electronics, Model: NTT-418)
Lattice Filters Circuit
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of patch Chords & Experimental Manual.
(a)
Two Port Network Parameters with Meters
(Make: R & D Electronics, Model: NTT-429M)
1.2V to 14V @ 250mA Variable DC Voltage Source
Resistive T and Networks
Analog meters
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of patch Chords & Experimental Manual.
31
Tellegen’s Theorem
(Make: R & D Electronics, Model: NTT-431)
Built in + 12V @ 250mA Fixed DC Voltage Source
Resistors Bank to Construct Closed Circuit
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of patch Chords & Experimental Manual.
32 Star-Delta Transformation
(Make: R & D Electronics, Model: NTT-432)
1.2V to 14V @ 250mA Variable DC Voltage Source
Resistive T and Networks,
Star-Delta Transformation
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of patch Chords & Experimental Manual.
33 T & p Attenuators
(Make: R & D Electronics, Model: NTT-433)
1.2V to 14V @ 250mA Variable DC Voltage Source
Resistive T and Networks
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of patch Chords & Experimental Manual.
34 Voltage Multipliers
(Make: R & D Electronics, Model: NTT-434)
Built in 9V @ 50Hz AC Voltage source.
Voltage Doublers,
NIC
Voltage Tripler,
Voltage Quadrupler,
Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to
measure the Voltage,
Set of patch Chords & Experimental Manual.
4. (i)
9.
General Purpose Electronic Trainer-II
(Make: R & D Electronics, Modal: DET –509)
+5V @ 1A and +15V @ 500mA DC power Supply
Solder less Board (840 Tie Points) (2 Nos.)
BCD to 7-Segment Decoder (7447)
Logic Input Switches (8Nos.)
Logic Status Indicators (8Nos.)
Loud Speaker 8 ohms, 2w (1Nos.)
1Hz & 10 Hz TTL Clocks (2Nos.)
Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points.
Set of patch Chords & Experimental Manual.
LOGIC GATES
FLIP FLOPS
16. RS, D, T & JK Flip Flops
(Make: R & D Electronics, Modal: DET –516)
RS, D & T Flip Flops one each using
(IC 7400, 7447,7476)
Logic Input Switches, (4 Nos.)
Logic Status Indicators, (4 Nos.)
Bounce less Pulsar
+5V @ 250mA DC Power Supply,
Assembled in Metal Box with Screen printed Circuit on Glass Epoxy with 4mm Socket for test points.
Set of Patch Chords & Experimental Manual.
SHIFT REGISTERS
19. Shift Registers-SISO, SIPO, PISO, PIPO
(Make: R & D Electronics, Modal: DET –519)
SISO (7491), SIPO (74164), PISO (74165), PIPO (74194),
Logic Status Indicators, (16Nos.)
1 Hz & 10 Hz TTL Clocks,
+5V @ 250mA DC Power Supply,
Assembled in Metal Box with Screen Printed Circuit on A Glass Epoxy PCB Panel with 4mm Socket for test points.
Set of Patch Chords & Experimental Manual.
NIC
22.
Universal Shift Registers (7496, 74195/196)
(Make: R & D Electronics, Modal: DET –522)
Universal SR (74195),
Logic I / P Switches (10 Nos.)
Logic Status Indicators, (4 Nos.)
1 Hz TTL Clock,
+5V @ 250mA DC Power Supply,
Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points.
Set of Patch Chords & Experimental Manual.
COUNTTERS
ENCODERS/DECODERS
41. 8-Bit Even/Odd Parity Generator / Checker
(Make: R & D Electronics, Modal: DET –541)
Even / Odd Parity Generator (74180),
Logic Input Switches, (10 Nos.)
Logic Status Indicators, (2 Nos.)
+5V @ 250mA, DC Power Supply,
Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.
Set of Path Chords & Experimental Manual.
MULTIPLEXERS / DEMULTIPLEXERS
48. 8-Line to 1-Line Multiplexer & Demultiplexer
(Make: R & D Electronics, Model: DET 548)
8-Line to 1-Line Multiplexer, (74151)
Address Generator, (7493)
1kHz TTL Clock,
Logic Input Switches, ( 9 Nos.)
Logic Status Indicator (1Nos.)
+5V @ 250mA DC Power Supply,
Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test
points.
Set of Patch Chords & Experimental Manual.
AE
T-
60
0:
SE
RI
ES
LIN
EA
R/
AN
AL
OG
EL
EC
TR
ON
IC
S
TR
AI
NE
RS
1. Linear IC Trainer (Discrete Version)
(Make: R & D Electronics, Model No. AET – 601)s
+12V @ 500mA DC Power Supply,
OP-Amp’s (741) (4 Nos.)
Voltage Regulator (723)
Comparator (710)
Timers (555) (2 Nos.)
Phase Locked Loop (565)
Resistor Bank (50 Nos.)
Capacitor Bank (20 Nos.)
Potentiometer Bank (10 Nos.)
Transistors (NPN, PNP) (2 Nos.)
(SL 100, SK 100)
Silicon Diodes IN4007 (2 Nos.)
Germanium Diode 0A79 (1 Nos.)
Zener Diodes (VZ 5.1) (2 Nos.)
Assembled in Metal Box with Screen printed Circuit on Aluminum Panel with 2mm Socket for test points.
Set of patch Chords & Experimental Manual
7. OP-AMP Characteristics
(Make: R & D Electronics, Model No. AET – 607)
Built in +/-12V / 350mA DC Power Supply,
OP-Amps (741),
Variable I/O Impedance,
Component Bank,
Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the
waveforms.
Set of Patch Chords & Experimental Manual.
8.
OP-AMP as Summer
(Make: R & D Electronics, Model No. AET – 608)
Built in +/- 12V/350mA DC Power Supply,
OP-Amp Summer (741),
Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the
waveforms.
Set of Patch Chords & Experimental Manual.
9. OP-AMP as Differentiation
(Make: R & D Electronics, Model No. AET – 609)
Built in +/- 12V/350 mA DC Power Supply,
OP-Amp Differentiation (741),
Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the
waveforms.
Set of Patch Chords & Experimental Manual.