Downhole filter.
Specifications†‡
Part Number OD, ID, Upper Lower Will-Pass Makeup Sweet Working Tensile Torque
in [mm] in [mm] Thread Thread Ball Size, Length, and Sour Pressure, Strength, Capacity,
in [mm] in [mm] Services psi [kPa] lbf [daN] ft.lbf [daN.m]
100195762 1.69 0.514 1-in AMMT-S 1.5-in DS 0 25.2 Yes 10,000 19,556 338
[42.93] [13.06] BOX PIN [0] [640.08] [68,948] [8,699] [38.41]
592505000 2.13 0.75 1.812-in DS 1.812-in DS 0 16.66 Yes 10,000 27,500 716
[54.10] [19.05] BOX PIN [0] [423.16] [68,948] [12,233] [81.25]
100674699 2.875 0.88 2.375-in PAC DSI 2.375-in PAC DSI 0 28.75 Yes 10,000 67,954 1,338
[73.03] [22.35] BOX PIN [0] [730.25] [68,948] [30,227] [151.90]
† Values
are based on 80,000-psi [551,600-kPa]-strength steel at 70 degF [39 degC] and a single load case.
‡ At
temperatures above 250 degF [140 degC], all ratings for the tool are reduced by 7%; at 350 degF [196 degC], ratings are reduced by 12%. Users should determine their application’s actual operating and load parameters.
slb.com/CoilTOOLS
*Mark of Schlumberger
Copyright © 2014 Schlumberger. All rights reserved. 10-CT-0023