Anda di halaman 1dari 12

www.friendly-energy.

de

Fuhrländer
Turbine overview
2.500 kW – 1.500 kW – 1.250 kW
600 kW – 250 kW – 100 kW – 30 kW

Englisch
Friendly Energy
Friendly World
As a pioneer of wind energy utilisation in

Germany and a group-independent manufactur-

er of wind turbines, Fuhrländer has focused

its operations towards robust system concepts

for more than 15 years. At present turbines range

from 30 kW to 2,5 MW. We are constantly

Turnkey
wind parks
Fuhrländer AG already established itself a long time ago as an
Example: Wind-Diesel-
international partner for the realisation of turnkey wind parks

including grid connection via a substation. We are happy to


combinations
make our experiences from a multitude of projects available In international locations where no electricity network is

to our customers. available, small and medium size wind turbines can be used

in combination with a small Diesel generator to realise or

Each location poses different requirements for wind park stabilise the regional and local energy supply. The robust

planners. Legal regulations, special technological features FL 100 and FL 250, for example, are ideally suited for the

of grid connections, feed options, financing and much more supply of self-sufficient units and the use in extreme

must be coordinated. conditions. The diesel generator merely provides a reference

frequency of 50/60 Hz and the energy supply during low

High flexibility and individual handling from the planning wind periods. The wind turbine supplies around 70 % of the

stage via the construction up to the start-up of the turbines created energy for this Fuel-Safe-System.

characterize our activities and lead to optimum results.


gaining valuable experience due to the close links between dealing with customers, suppliers and partners. Support

development, manufacturing and service. Our customers instead of dominance – that is our motto.

benefit from sound investments in wind turbines with a high

technical availability. Even at difficult locations our wind Friendly energy is more than merely utilising environmentally

farms demonstrate their strengths, in reliability and compatible energy. It means hope and a future characterised

operational safety. People are the focus of our actions in by training, work and added value on site.

FLAGserv for maximum


operational safety
Wind turbines are technically complex systems made service team online. This allows rapid response and target

up of a variety of mechanical, electrical, electronic and orientated service activity which puts the wind turbine back

hydraulic components. Fuhrländer developed FLAGserv as on the grid as fast as possible. This condition monitoring

an Internet based communications platform, which also allows maintenance with foresight and contributes to the

functions independently from manufacturers, to maximize value creation of the turbines.

the technical availability of our robust wind turbines and to

recognise potential faults in the preliminary stages. Further- This means a gain in availability and profitability of the

more the FL system provides the best possible conditions for turbine for the investor. The type specific insurance of the

documenting data for operation managers, investors and reliable FL turbines also supports this concept.

manufacturers.

If faults occur, the wind turbines automatically generate a

message to the Fuhrländer data server which informs our


FL 2500
Rotor: Ø 80/90/100 m
Tower heights:
65*/ 85* m (with 80 m Rotor, IEC Ia)
85*/100*/117**/141**/160** m (with 90 m Rotor, IEC IIa, DiBt 3a)
85*/100*/117**/141**/160** m (with 100 m Rotor, IEC IIIa, DiBt 3a)
*
tubular tower, ** lattice tower

Even more
economic efficiency
The new 2,5-MW turbine with variable speeds sets benchmarks:

due to the possible rotor blade sizes of 80, 90 und 100 m it can

be harmonized with all locations and wind conditions in the

best possible way. Tubular towers of 65, 85 and 100 m as well as

lattice towers of up to 160 m create the prerequisite for a high

economic efficiency and reliability as to the production of wind

power. Thanks to the high hub heights inland locations, e.g. in

woodlands, can also be developed even more economically.

The innovative driving conception with the large roller bearing,

the shaft coupling and the compact gear unit provides for more

safety and a longer life. The same applies to the especially

designed hub with its closed operating room.

Thanks to the crane concept permitting the replacement of all

main components without an expensive truck-mounted crane

the mounting and operating cost can be reduced.

Medium wind 80 m Rotor 90 m Rotor 100 m Rotor


Output Power curve FL 2500 speed at hub Annual yield Annual yield Annual yield
[kW] (theoretical) height [m/s] [kWh] [kWh] [kWh]
10 10’733’000 11’918’000
9.5 10’083’000 11’289’000
9.0 9’363’000 10’581’000 11’900’000
100 m Rotor 8.5 8’580’000 9’800’000 11’144’000
8.0 7’745’000 8’950’000 10’307’000
90 m Rotor 7.5 6’868’000 8,039’000 9’393’000
80 m Rotor 7.0 5’964’000 7’081’000 8’409’000
6.5 5’052’000 6’088’000 7’365’000
6.0 4’154’000 5’083’000 6’277’000
5.5 3’295’000 4’093’000 5’170’000
Wind speed [m/s] 5.0 2’502’000 3’150’000 4’080’000
Yields calculated to IEC 61400-12

Subject to technical alterations. Data can vary depending on components.


FL 1500
Rotor Ø 70/77 m
Tower heights:
65 / 100 m (with 70 m Rotor)
61.5 / 100 m (with 77 m Rotor)

The compact turbine


for all situations
Output Power curve FL 1500
[kW] (70 m measured / 77 m theoretical)
Fuhrländer expanded its megawatt class by a compact,

pitch controlled turbine, the FL 1500. The turbine adapts

to coastal and interior locations due to its different hub

heights and two different rotor sizes. Its individual blade

adjustment via maintenance-free AC-motors and the


77 m Rotor
integrated free running provide high operational safety.
70 m Rotor
The intelligent torque control ensures a constantly high

release of power to the long live, double-fed three phase

generator.
Wind speed [m/s]

Medium wind 70 m Rotor 77 m Rotor


speed at hub Annual yield Annual yield
height [m/s] [kWh] [kWh]
8.5 6’195’000
8.0 5’699’000
7.5 5’122’500 5’296’000
7.0 4’546’000 4’735’000
6.5 3’919’500 4’131’000
6.0 3’293’000 3’502’000
5.5 2’675’500 2’867’000
5.0 2’058’000 2’251’000
4.5 1’542’500 1’683’000
4 1’027’000 1’188’000

Subject to technical alterations. Data can vary depending on components.


FL MD 70/77
Rotor Ø 70 m
Tower heights 65* / 80* / 85* / 114.5** m

Rotor Ø 77 m
Tower heights 61.5* / 85* / 90*/ 100*/ 111.5** m

*
tubular tower, ** lattice tower

A concept
sets standards
The field-proven concept of the FL MD 70/77 with individual

blade adjustment and double-fed asynchronous generator as

well as its large rotor stands side by side with the 2 MW-class.

Rotors with 70 and 77 m diameters and different tower heights

up to more than 100 m allow the optimum adaptation to each

location. Robust machine construction in combination with

the latest control technology and experienced engineering set

standards in this class in terms of profitability and reliability.

Therefore, more and more investors are enthusiastic about the

FL MD 70/77, which Fuhrländer already exported to countries

such as Portugal, Hungary and Japan, also in a 60-Hz version.

Output Power curve FL MD 70/77


[kW] (measured)
Medium wind FL MD 70 FL MD 77
speed at hub Annual yield Annual yield
height [m/s] [kWh] [kWh]
FL MD 77 8.5 5’727’000
FL MD 70 8.0 5’232’000
7.5 4’669’000 5’351’000
7.0 4’105’000 4’820’000
6.5 3’508’000 4’205’000
6.0 2’910’000 3’589’000
5.5 2’341’000 2’956’000
5.0 1’771’000 2’324’000

Wind speed [m/s]

Subject to technical alterations. Data can vary depending on components.


FL 1250
Rotor Ø 62 m
Tower heights 50 / 70 / 85 m

The turbine for


international locations
The FL 1250 is based on the tried-and-tested Fuhrländer The modern plug and play concept enables simple

FL 1000 concept. It achieves a nominal output of 1.25 MW installation on site. This powerful megawatt turbine is

with its huge 62 m rotor. As a robust stall-regulated unit available in the hub heights of 50, 70, and 85 m, and in steel

(also optionally available as pitch version), it uses its asyn- tower or lattice towers. Lightning protection systems, dust

chronous generator to provide high technical availability, encapsulation, air conditioning, corrosion protection, etc.

operational reliability and grid compatibility - especially meet the requirements for use in extreme conditions as

important in remote areas. The FL 1250 underlines its well. In addition, the compact turbine can be erected with

international character with compatibility for both 50 Hz smaller cranes.

and 60 Hz grids.

Output Power curve FL 1250 Medium wind FL 1250


[kW] (theoretical)
speed at hub height Annual yield
[m/s] [kWh]
8.5 4’431’000
8.0 4’002’000
7.5 3’549’000
7.0 3’080’000
6.5 2’604’000
6.0 2’132’000
5.5 1’675’000
5.0 1’248’000
Yields calculated to IEC 61400-12

Wind speed
[m/s]
Subject to technical alterations. Data can vary depending on components.
FL 600
Rotor Ø 50 m
Tower heights 50 / 75 m

The compact
medium class
With the FL 600 Fuhrländer adds a compact, pitch

regulated turbine to its medium class. The single blade

adjustment via maintenance-free AC motors and the

integrated free-running provide high operating safety.

Gear, plummer block and rotor shaft create a compact and

reliable unit. The intelligent torque regulation provides a

sustained high output performance of the long-life, double

driven three-phase alternator.

Output Power curve FL 600


[kW] (measured)

Medium wind FL 600


speed at hub height Annual yield
[m/s] [kWh]
7.5 2’286’000
7.0 2’064’000
6.0 1’553’000
5.0 1’017’000
4.0 536’000

Wind speed
[m/s]

Subject to technical alterations. Data can vary depending on components.


FL 250
Rotor: Ø 29.5 m
Tower heights: 42 / 50 m

The basic turbine


for universal use
For years, Fuhrländer‘s FL 250 has proven in inland and robustness, the compatibility of this centrally controlled

coastal location that wind turbines of the medium class turbine is trendsetting for local users: The FL 250 supplies

continue to be of commercial use. Install, connect, let it islands in the Pacific in combination with a Diesel engine,

run – these are the experiences of many operators of this produces self-sufficient power for companies in structurally

machine designed with a life of 25 years which produces weak regions and strengthens local power grids. The FL 250

reliable power in many countries far beyond Germany and proves its stability in particular in typhoon regions.

Europe from the USA to Japan. In addition to its

Output Power curve FL 250


[kW] (measured)
Medium wind FL 250
speed at hub Annual yield
height [m/s] [kWh]
8.5 857’000
8.0 791’000
7.5 717’000
7.0 638’000
6.5 554’000
6.0 468’000
5.5 380’000
5.0 302’000

Wind speed
[m/s]
Subject to technical alterations. Data can vary depending on components.
FL 100
Rotor: Ø 21 m
Tower height: 35 m

The robust
start-up turbine
At the end of the 80s, Fuhrländer redefined the term

„quality“ with the FL 100: Since then, this wind turbine has

been operating with the highest reliability even in extreme

conditions. We have maintained this turbine concept up to

the megawatt class. It is designed for a life of ca. 25 years.

The speciality of the FL 100, for example, is the supply of

self-sufficient living units or the use in extreme conditions in

typhoon regions. As an example of the use of wind power, it

supplies e.g. an environmental institute in a Czech cloister

and provides power to the electric stacker fleet of an

international shipping agent.

Output Power curve FL 100


[kW] (theoretical)

Medium wind speed FL 100


at hub height [m/s] Annual yield
[kWh]
8.5 396’000
8.0 370’000
7.5 340’000
7.0 306’000
6.5 267’000
6.0 226’000
5.5 183’000
5.0 144’000

Wind speed
[m/s]

Subject to technical alterations. Data can vary depending on components.


FL 30
Rotor: Ø 13 m
Lattcie towers: 18 / 27 m

The small turbine with


the highest reliability
Since the start of wind power use, the FL 30 has proven design and generates kilowatt after kilowatt of clean wind

that Fuhrländer concepts fit up to today. This centrally power – maintenance-free and discrete. This machine is

controlled compact turbine with blade tip brake runs also suitable for remote locations without demands for

totally uncomplicated on its slim lattice mast in various the electricity network or the infrastructure – mainly in the

urban and rural locations. It has a technologically simple market outside Europe.

Output Power curve FL 30


[kW] (theoretical)

Medium wind FL 30
speed at hub height Annual yield
[m/s] [kWh]
8.5 129’000
8.0 121’000
7.5 111’000
7.0 101’000
6.5 89’000
6.0 77’000
5.5 64’000
5.0 52’000

Wind speed
[m/s]

Subject to technical alterations. Data can vary depending on components.


www.friendly-energy.de

Auf der Höhe 4


D-56477 Waigandshain
Fon +49 (0) 26 64.99 66-0
Fax +49 (0) 26 64.99 66-33
mail@fuhrlaender.de
www.fuhrlaender.de

© Fuhrländer AG 2/2007

2.500 kW – 1.500 kW – 1.250 kW


600 kW – 250 kW – 100 kW – 30 kW

Anda mungkin juga menyukai