2. What is the correct syntax for a static default route what will use the serial0/0/1 interface?
a. ip route 0.0.0.0 255.255.255.255 serial0/0/1
b. ip route 255.255.255.255 255.255.255.255 serial0/0/1
c. ip route 255.255.255.255 0.0.0.0 serial0/0/1
d. ip route 0.0.0.0 0.0.0.0 serial0/0/1
3. What type of route is used in order to forward traffic for destinations that are not
specifically listed in the routing table on the Cisco router?
a. Static
b. Dynamic
c. Static Default
d. Route of Last Resort
www.stormwindlive.tv
StormWind Live Training Page |2 CCENT Training
8. What command prompts for a username and password check for Telnet access to a Cisco router?
a. password
b. login
c. secure
d. aaa authenticate
9. What command prevents the vty lines from accepting Telnet and only permits SSH?
a. transport input ssh
b. login
c. transport input no telnet
d. ssh enable
10. What command controls the idle timeout of the console port on a Cisco router?
a. idle-timeout
b. idle timeout
c. exec-time
d. idle
11. What command would you use to see the path that is taken through the network?
a. path check
b. traceroute
c. test
d. ping repeat
e. ping
www.stormwindlive.tv
StormWind Live Training Page |3 CCENT Training
Answers:
1. e
2. d
3. c
4. d
5. a
6. c
7. d
8. b
9. a
10. c
11. b
12. c
www.stormwindlive.tv